Eaton Eaton 5PX User manual
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 1/14
UPS model : 5PX
Date : 05/02/2016
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 2/14
Contents
1. Download the software setUPS and the firmware
(if receiving this document by email)
2. UPS connection
3. Launch setUPS
4. Power OFF the UPS
5. setUPS firmware menu
6. Firmware selection
7. Confirmation
8. Upgrade process
9. Upload success
10. Return to normal state
11. UPS ON
12. Trouble shooting
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 3/14
1. Download the software setUPS and the firmware
Go to the Power Quality Website (http://eaton.com/Downloads/)
Select your product , 5PX, and select your solution type, firmware.
Click on “Download 5PX UPS Firmware Updates”
And click on the required link.
Firmware
file
setUPS
software
Upgrade
instructions
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 4/14
2. UPS connection
Connect a communication cable to the UPS unit, on USB or RS232 (RJ45) port on the
back of the UPS. Then connect the cable to your computer.
3. Launch setUPS
For a first time Eaton®setUPS installation, double click on the exe file
and valid the “User Account Control” message by “Yes”
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 5/14
The installer opens, click on “Next”Read and click on “Accept”
Click on “Install”And on “Finish”
And the Eaton®setUPS starts.
If Eaton®setUPS is already installed, open setUPS
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 6/14
At the startup, the software searches for the connected UPS
and as soon as communication is established, the product is identified :
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 7/14
4. Power OFF the UPS
To turn the power off on the 5PX UPS, press and hold the power button for 3
seconds.
WARNING : this will turn OFF any load that is connected to the UPS outlets !
Once the unit is OFF, the screen looks like the picture below :
5. setUPS firmware menu
On the left menu, select “Firmware” section, the available firmware appears :
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 8/14
If the firmware list is empty, copy/paste the downloaded firmware in the target folder My
Documents\Eaton setUPS\firmware (click on the “…” button) :
6. Firmware selection
Click on the firmware file to select it and then on the “Upload firmware” button :
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 9/14
7. Confirmation
The following screen appears which reminds you that UPS output is OFF during the
upgrade, select “Yes” to continue
8. Upgrade process
A click noise comes from the UPS (relay) and it transfers into Boot loader mode. The
firmware will then be erased and then rewritten into the UPS.
During the flash process, the display on the UPS goes blank and the AC line, the battery
and the Alarm lights cycle. This is normal.
Eaton®setUPS
Firmware upgrade procedure
Eaton®setUPS_5PX_firmware_upgrade_rev_02 Page 10/14
And on setUPS window, the firmware upgrade steps appear :
9. Upload success
When the firmware flash process is done, the UPS fans start and the UPS emits a
long beep. The display on the UPS returns back to the normal OFF state.
The setUPS issues a pop up to let know the firmware flash has been successful : Click
on “OK” :
Other manuals for Eaton 5PX
5
Table of contents
Other Eaton UPS manuals
Eaton
Eaton 93PS-8(20)-20(-C) Manual
Eaton
Eaton Power Xpert 9395 User manual
Eaton
Eaton 9SX 15KPM Serie User manual
Eaton
Eaton 5E650i User manual
Eaton
Eaton Powerware 5110 User manual
Eaton
Eaton Ellipse ECO 800VA DIN User manual
Eaton
Eaton Ellipse ASR 450 User manual
Eaton
Eaton Power Xpert 9395 Manual
Eaton
Eaton Power Xpert 9395P User manual
Eaton
Eaton Power Xpert 9395 User manual
Eaton
Eaton Power Xpert 9395P-600/600 User manual
Eaton
Eaton 9395 UPS 10001100 kVA User manual
Eaton
Eaton 5SC 1500G User manual
Eaton
Eaton 5S User manual
Eaton
Eaton 5SC 500i User manual
Eaton
Eaton 1000i User manual
Eaton
Eaton Powerware 9390 User manual
Eaton
Eaton Powerware 9140 User manual
Eaton
Eaton 93PM 150 kW SIAC-B Three-Wire User manual
Eaton
Eaton BladeUPS none User manual
