Eaton Power Xpert PXGX Programming manual

p/n: 164950240

Revision 2

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

Package Contents

lPower Xpert Gateway Minislot (PXGX) UPS Card

lUSB Cable

lQuick Start Instructions

Quick Start Instructions

Eaton®® Power Xpert®® Gateway (PXGX) UPS Card

Eaton reserves the right to change specifications without prior notice Eaton®, Power Xpert®, and PredictPulseTM are registered

trademarks of Eaton or its subsidiaries and affiliates Google Chrome is a trademark of Google Inc Linux is a registered trademark of

Linus Torvalds Microsoft, Internet Explorer, and Windows are registered trademarks of Microsoft Corporation in the United States and in

other countries Mozilla and Firefox are registered trademarks of the Mozilla Foundation other trademarks are property of their respective

companies All other trademarks are property of their respective companies All other trademarks are property of their respective

companies

express written approval of Eaton

Help Desk Numbers

United States 1-800-356-5737 or 1-800-843-9433

Canada 1-800-461-9166 ext 260

All Other Countries Call your local service representative

Web Site www.eaton.com/pxgx

NOTE On the Web site opening page, click Support and select the Customer Service

link for more information.

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 iii

TTaabbllee ooff CCoonntteennttss

11 IInnssttaallllaattiioonn CChheecckklliisstt ..........................................................................................................................................................................................................................................................................11

22 IInnssttaallll tthhee CCaarrdd............................................................................................................................................................................................................................................................................................33

33 CCoonnnneecctt tthhee CCaarrdd ttoo tthhee CCoommppuutteerr ....................................................................................................................................................................................................................................55

44 IInnssttaallll tthhee DDrriivveerr SSooffttwwaarree ..........................................................................................................................................................................................................................................................

55 OObbttaaiinn aa DDHHCCPP--AAssssiiggnneedd IIPP AAddddrreessss.......................................................................................................................................................................................................................... 1111

66 AAssssiiggnn aann IIPP AAddddrreessss MMaannuuaallllyy ........................................................................................................................................................................................................................................ 1155

DDiissaabbllee BBrroowwsseerr CCoommppaattiibbiilliittyy MMooddee.......................................................................................................................................................................................................................... 1199

88 RReeggiisstteerr aa PPrreeddiiccttPPuullssee SSuubbssccrriippttiioonn ........................................................................................................................................................................................................................ 2211

iv Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Table of Contents

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 1

CChhaapptteerr 11 IInnssttaallllaattiioonn CChheecckklliisstt

1. Verify that the following items are available:

oower Xpert Gateway Minislot ( XGS) U S Card package contents (card, cable, Quick Start

Instructions)

ohillips®screwdriver

oAvailable USB port on a computer running Microsoft®Windows®

oWeb browser (Microsoft Internet Explorer®version 8.0 and higher, Mozilla®Firefox®, or

Google Chrome™ are recommended)

2. If you are going to use Dynamic Host Configuration rotocol (DHC ), provide your local network

administrator with the card's MAC address. The MAC address is located on either the shipping box label or

the label on this card.

oMAC Address _______________________________________________

3. If you are not going to use DHC to provide any of the settings listed below, contact your local network

administrator for the settings.

In the table below, check the DHCP check box or enter the values for manual configuration. This data is

referenced later in the procedure.

Item DHCP* Manua Configuration

IPv4 oCard IP Address: _______________________________

Netmask: _____________________________________

Gateway: _____________________________________

DNS – Name Servers oName Server #1:________________________________

Name Server #2:________________________________

Name Server #3:________________________________

DNS – Domain oDomain:_________________________________________

* The network administrator normally sets up the DHCP server to provide a static IP address each time the card makes a

DHCP request

4. If you need e-mail functionality, obtain the SMT mail server's I address or host name. If using the SMT

host name, verify that you also have the Name Server I address (see Step 3).

oSMT (mail server) I Address

or Host Name _______________________________________________________________

2 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Installation Checklist

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 3

CChhaapptteerr 22 IInnssttaallll tthhee CCaarrdd

NOTE The hot-swappable XGX U S card can be installed without turning off the U S or

disconnecting the load.

To install the XGX U S card:

1. Verify that all six DI switches on the card are in the OFF position (see Figure 1).

Figure 1. Verify DIP Switches are OFF

6 5 4 3 2 1

OFF

2. If not already done, record the MAC address for future reference (see the Chapter 1 Installation Checklist).

3. Remove the X-slot®cover from the U S. Retain the screws.

NOTE If another card is already installed with an attached communication cable, disconnect the

cable and then remove the card.

4. To prevent electrostatic discharge (ESD), place one hand on a metal surface, such as the U S panel.

5. Slide the card into the open slot and secure with the screws removed in Step 2 (see Figure 2).

4 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Figure . Secure the PXGX UPS Card

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

6. From your laptop, go to www.eaton.com/pxgx.

7. On the Features tab, click the Download Configuration File link to download the configuration file.

8. Save the driver configuration file (powerxpert.inf) to the C: drive using the default location or a folder you

select. Note the path of the downloaded file on your computer. (Never download the file to your desktop).

Install the Card

Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2 5

CChhaapptteerr 33 CCoonnnneecctt tthhee CCaarrdd ttoo tthhee CCoommppuutteerr

To connect the card to the computer:

1. lug the small connector at the end of the supplied USB configuration cable into the setup port on the card

(see Figure 3).

Figure 3. Install the USB Cable

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

2. lug the other end of the USB cable into the USB port on the computer. The Windows operating system

detects new hardware.

NOTE If a message indicates that the device driver software was not successfully installed,

click Ignore.

NOTE You may see a pop-up message window that shows “Found new hardware.” This

indicates that the hardware installed successfully.

3. Connect an active Ethernet cable (not supplied) to the Upstream Ethernet connector on the XGX U S

card (see Figure 4).

4. If you are connecting to another XGX U S card or other Ethernet device, connect an Ethernet cable (not

supplied) to the Downstream Ethernet connector on the XGX U S card.

6 Eaton Power Xpert® Gateway PXGX UPS Card Quick Start Instructions 164950240—Rev 2

Figure 4. Install the Ethernet Cable

Power Xpert Gateway

PXGX UPS

EMP Upstream Downstream

100100 Act Act Setup

Restart

Status

DHCP

Ident

Power

5. Wait for the power light and status light on the installed card to illuminate. This takes about two minutes.

6. Open a Web browser and type the default I address (https://169. 54.0.101 for firmware 2.6.0.0 or later,

http://19 .168. 00.101 for earlier firmware versions).

7. Did the ower Xpert Gateway software open to the XGX U S card page?

• If yes, the driver has already been installed automatically. Either verify the I address assigned

through DHC or manually enter a static (fixed) I address for the card’s network connection:

a. To verify the DHC -assigned I address, go to Chapter 5 Obtain a DHCP-Assigned IP Address.

b. To manually enter a fixed I address, go to Chapter 6 Assign an IP Address Manually.

• If no, the driver has not been installed. Go to the next section, Chapter 4 Install the Driver Software in

order to confirm that you have the most current USB Driver software. If not, you will need to install or

update the USB Driver software.

Connect the Card to the Computer

Other manuals for Power Xpert PXGX

Table of contents

Other Eaton Control Unit manuals

Eaton

Eaton Char-Lynn VersaSteer 10 Series Owner's manual

Eaton

Eaton XMCSPAN-001 Guide

Eaton

Eaton ESWV10401 Manual

Eaton

Eaton COOPER POWER SERIES Installation and operating instructions

Eaton

Eaton DXE-EXT-SET Manual

Eaton

Eaton Crouse-hinds series User manual

Eaton

Eaton Cutler-Hammer Modbus mMINT Quick start guide

Eaton

Eaton Crouse-hinds series User manual

Eaton

Eaton 5PX EBM 72V RT2U User manual

Eaton

Eaton Powerware PowerPass 9125 User manual

Eaton

Eaton NZM XBSM Series Manual

Eaton

Eaton Durant Eclipse Series User manual

Eaton

Eaton Power XL SmartWire-DT DX-NET-SWD3 Manual

Eaton

Eaton EC4E-221-6D4T1 User manual

Eaton

Eaton EC4E-221-6D4T1 Manual

Eaton

Eaton ELC-PC12NNDR User manual

Eaton

Eaton MFD-CP8 Series Manual

Eaton

Eaton Char-Lynn User manual

Eaton

Eaton Eaton 5PX Assembly instructions

Eaton

Eaton Power Xpert C445 Manual

Eaton

Eaton BBA 16 Series Manual

Eaton

Eaton DX-NET-BACNETMSTP Manual

Eaton

Eaton SmartWire-DT SWD Series User manual

Eaton

Eaton DeviceNet User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual

Flyron

Flyron FN-BC04 user manual