EAGLE I EG-10 lite User manual
Product Introduction
3. Indicator LED
4. Screen
6. Mode Button
7. Lock Button
1.Lens
2. Speaker
9. TF Card Slot
10. Up Button
12. Down Button
14. Bracket Hole
15. USB port
13 HDMI Port
16. Mic
17. Reset
5. OK Button
8. Power Button
11. Menu Button
1
Lens
Camera Lens
2
Speaker
Speaker
3
Indicator LED
RED light indicated the Battery is charging.
BLUE light indicated Stand By.
BLUE light Blinking indicated Recording.
4
Screen
Display Screen
5
OK Button
Confirm key. Press this key to start
recording & stop recording.
6
MODE Button
Press to enter Photo Taking mode. Press
again to enter Playback mode.
7
LOCK Button
Press to lock file in recording mode
8
POWER Button
Long press to switch on/ switch off the
device.
9
TF Card Slot
Insert the SD Card here.
10
UP button
Press to make selection in Menu settings
11
MENU Button
Press to enter Menu settings in standby
mode
12
Down Button
Press this key in recording mode to turn
audio recording on/off
13
HDMI Port
To connect the CVR to your TV
14
Bracket Hole
To attach the suction cup mount
15
USB Port
To connect the device to the car charger
16
MIC
For audio recording
17
RESET
To reset the device
Before You Start
ü
Be sure all the following equipment and accessories have been included with your
CVR. If anything is missing, contact your dealer.
¨Car Charger ¨Mount
¨Manual Book ¨USB Cable
ü
Recharging the CVR
Connect the CVR to the USB cable provided, use an appropriate adaptor to charge
the CVR. The RED LED will light up. It takes around 180 minutes to fully recharge.
ü
Insert Micro SD card
When you insert your card into the micro SD slot you will hear a ’click’ sound that
means the SD card insert correctly. To remove the card, press the card lightly, it will
eject partially allowing you pull the card out.
**Do not remove or insert the Micro SD Card when the CVR is switching on
G
uide
v
Turning Power ON / OFF
Connect the charger to the car cigarette port, the CVR will switch on/switch off &
start/stop recording automatically once the engine started/off. Or press and Hold the
Power Button to switch on the CVR manually.
v
Start/Stop Recording
Press OK Button to start recording (a red dot will blinking on the screen), press
again to stop recording (the red dot will disappear).
v
Enter Menu Setting
Press OK Button to stop recording. Press Menu Button to enter Video Menu
Setting. Press again to enter General Menu Setting.
v
Select Menu Setting
Press UP Key or DOWN Key to choose the preferable menu setting. Press OK
Button to confirm the selection.
v
Exit Menu Setting
Press Menu Button to exit the Menu Setting.
vSet Date & Time
Enter General Menu Setting, choose Date/Time, use the UP Key & DOWN Key
to adjust the correct date & time.
v
Enter Photo Taking Mode & Playback Mode
Press Mode Button to enter Photo Taking Mode, press OK Button to snap a
photo. Press Mode Button again to enter Playback Mode, select the file by using
UP/DOWN Key and press OK Button to play the selected file.
V
ideo Menu Setting
v
Resolution
Select your preferable resolution. The higher resolution, the clearer footage will be
recorded. Recommended setting: 1080FHD
v
Loop Recording
Select the footage duration from 1 minutes/ 2 minutes/ 3 minutes. Select OFF if you do
not want to split the footage to different files. Recommended setting: 2 minutes or 3
minutes
v
WDR
Wide Dynamic Range adjusts automatically to bright and dark areas to adjust for and
eliminate overexposure and under exposure conditions.
v
Exposure
Adjust Exposure Value (lighter or brighter) for optimal image effect.
v
Motion Detection
Motion Detection enables the CVR to record any moving objects in front of the camera
automatically. The CVR will continue recording until the battery runs out. Recommended
setting: Only turn on when needed.
v
Record Audio
Turn ON/OFF the Record Audio function to enable/disable audio recording dur ing
recording mode.
v
Date Stamp
Turn ON/OFF the Date Stamp function to enable/disable the date shown on the footage.
v
G-sensor
The built in G-sensor allows the CVR to record any impact or sudden course changes so
that the event is locked & protected automatically and will not be overwritten on the
memory card. Recommended setting: Normal
vTime Lapse
Time lapse means the frequency at which film frames are captured (the frame rate) is
much lower than that used to view the sequence. When played at normal speed, time
appears to be moving faster and thus lapsing. Select from the options 100ms/ 200ms/
500ms, . The higher milliseconds, the more footage can be recorded in the same
amount of time as the recording is speeded up. Hence it will save disc space Turn OFF i
s
you want the video to be recorded in normal speed.
G
eneral Menu Setting
v
Parking Mode
Turn on the Parking Mode function allow the CVR switch on and start recording
automatically while the CVR is turned off. It will only function when the CVR feels the
impact. It will continue recording until the battery runs out, a “P” is shown on the scree
n.
Recommended setting: High (when needed)
v
Date/Time
Adjust date & time setting before start using the CVR.
v
Plate Num
Choose to insert your car plate number
v
Beep Sound
Turn the keypad sound ON/OFF
v
Language
Select your preferable language
v
TV Mode
Connect to a HDMI Cable (additional accessories) and playback on a TV. Choose from
NTSC or PAL for optimal viewing.
v
Frequency
Select 50 Hz or 60 Hz
v
Screen Saver
The screen will be shut down in 30 seconds/1 minutes/2 minutes. Select OFF if you do
not want the screen to shut down. The CVR will keep recording even the screen is shut
down. Press any button to turn on the screen.
v
Auto Power Off
CVR will auto shutdown in 3 minutes/5 minutes/10 minutes. Recommended setting:
Always turn this function OFF
v
Format
Format the SD Card (All data will be deleted)
v
Default Setting
Turn the device back to the Default Setting
v
Version
Software version
C
amera Settings
v
Capture Mode
Select the capture mode from 2S Timer/ 5S Timer/ 10S Timer. If you prefer to take the
pictures manually, please select ‘Single’.
v
Resolution
You may select your preferred resolution for photo taking. Recommended setting: 12
M
4032X3024
v
Sequence
Turn on this setting to take 3 pictures continually.
v
Quality
Select the quality of your pictures from the options: Fine/ Normal/ Economy
v
Sharpness
Select the sharpness of your pictures from the options: Strong/ Normal/ Soft
v
White Balance
Adjust White Balance to for optimal image effect.
v
Colour
Select the colour of your pictures from the options: Normal/ Black and White/ Sepia
vISO
ISO is the level of sensitivity of your camera to available light. The lower the ISO
number, the less sensitive it is to the light, while a higher ISO number increases the
sensitivity of your camera. Select from the options Auto/ 100/ 200/ 400
vExposure
Adjust Exposure Value (lighter or brighter) for optimal image effect.
vAnti-Shaking
This setting allows users to shoot images at slow shutter speeds, without causing
blurring when shooting hand held.
vDate/Time
Turn OFF/Date/Date and Time function to enable/disable the date or date and time
shown on the footage.
Specifications
Features
Car video recorder
View Angle
170°
LCD screen
3.0 inch TFT
Front Camera Full HD 1080P
Video Format
MOV
Loop recording time
1 min/ 2 min/ 3 min
Memory
Micro SD card (Support up to 32GB)
Operating Voltage
DC 5V-1A
USB Port
USB1.1/2.0
Battery Capacity
180mAH Rechargeable Lithium Battery
Power Frequency
50HZ/60HZ
Speaker Support
Input/ out put USB- disk/ PC Cam
Language
Simple Chinese, Traditional Chinese, English, French,
Espanol, Portugese, German, Italian Russian, Japanese,
Thai
Troubleshooting
Unable to record or take photo
Confirm that the Micro SD card is
of proper class (Minimum: Class 6)
and has available capacity
Device doesn’t work with my SD
card
If the device doesn’t recognize the
card, remove the SD card and
reinsert. If still not recognized, the
SD card may be damaged or the
device does not support this type
of memory card. Try another
memory card.
“File Error” appears during replay
Uncompleted files due to Micro SD
card storage error. Reformat card
Video or photo unclear
Check lens for fingerprints,
protective film or other
obstruction. Use a soft cloth to
clean lens.
Black image when recording sky
or water scene
Scenes with large contrast can
influence the automatic exposure
function. Adjust Exposure setting
to correct image
Colour is affected by cloudy or
bright conditions
Set the "White Balance" function
to automatic
The device doesn't turn on
immediately when I start my car
Make sure that the 'Power On
Delay' is turned off
"Key" icon keeps appearing
eventhough I did not manually
lock the files
Check the G Sensor setting and
adjust it to 'Low' so that it is not
too sensitive.
The device is working but the
buttons doesn't work
Press 'RESET' to restart the
device. Please be noted that once
reset, some data might be lost
Table of contents
Languages:
