Dynamix 2540 User manual
User Guide
VoIP Gateway
DYNAMIX 2540 (FXO-04)
2
Contents
CH1 Introduction................................................................................... 4
1-1 Physical Interface ............................................................................. 4
1-2 IP Network connection.................................................................. 4
1-3 Environmental................................................................................ 5
1-4 Front Panel: LED Indicators.......................................................... 5
1-5 Rear Panel: LED Indicators........................................................... 6
1-6 QUICK SETUP ................................................................................ 7
CH2 Device Settings..............................................................................11
2-1 Network Configuration....................................................................11
2-2 Device Time Setting ....................................................................... 13
2-3 Device Advance Setting.................................................................. 14
2-4 User Login Setting.......................................................................... 15
2-5 Debug Settings................................................................................ 16
2-6 Event Notice ................................................................................... 17
2-7 Auto Provisioning........................................................................... 18
2-8 SNMP ............................................................................................. 20
CH3 NAT Setting ................................................................................. 21
3-1 DHCP Ser. (DHCP server).............................................................. 21
3-2 UPNP (universal plug and play server) .......................................... 22
3-3 Bandwidth (Bandwidth Control).................................................... 22
3-4 URL Filter....................................................................................... 26
3-5 IP Filter........................................................................................... 27
3-6 MAC Filter ..................................................................................... 27
3-7 APP Filter........................................................................................ 28
3-8 Port Filter........................................................................................ 28
3-9 Port Fwd ......................................................................................... 29
CH4 VOIP Setting................................................................................ 30
4-1 SIP .................................................................................................. 30
4-2 Audio .............................................................................................. 31
4-3 Tone ................................................................................................ 33
4-4 NAT Traversal................................................................................. 34
CH5 VOIPAdvance ............................................................................. 35
3
5-1 SIP .................................................................................................. 35
5-2 Audio .............................................................................................. 37
5-3 Ring ................................................................................................ 38
CH6 Dialing Plan................................................................................. 40
6-1 General............................................................................................ 40
6-2 Dialing Rule.................................................................................... 41
6-3 Digit Manipulation ......................................................................... 42
6-4 Phone Book..................................................................................... 43
CH7 FXO Setting................................................................................. 44
7-1 FXO line ......................................................................................... 45
CH8 SIP Trunk .................................................................................... 47
8-1 Create SIP Trunk............................................................................. 48
CH9 Route Plan................................................................................... 50
9-1 Create Route Plan........................................................................... 51
CH10 Status.......................................................................................... 53
10-1 Device States ................................................................................ 53
10-2 Line States .................................................................................... 54
10-3 SIP Trunk States............................................................................ 55
CH11 Maintenance.............................................................................. 56
11-1 Firmware Update .......................................................................... 56
Appendix A --- System Recovery......................................................... 57
Appendix B --- HTTP auto provisioning.............................................. 60
peer to peer mode with hotline by port to port application............. 62
Appendix C--- Dynamix 2504 (FXS-04) andDynamix 2540(FXO-04) in
4
CH1 Introduction
includes 1-WAN/1-LAN (management port) 10/100 base-T network
environment. Field-proven quality of Voice communication and Fax
an excellent solution for various VoIP applications.
1-1 Physical Interface
Ethernet port (RJ-45, 10/100 base-T)
1-WAN port, for connect to router, ADSL modem (ATU-R), or switch
hub directly.
1-LAN port, for PC, management or other network devices
connecting.
Telephony port (RJ-11)
24-FXO ports, to connect to PSTN lines
Console port (RS232, rate:115200)
AC power Jack
Status indicated LED
Indicates P o w e r, Ethernet, Line, SIP and system status
1-2 IP Network connection
IPv4 (RFC 791)/IPV6 (RFC 2460)
IPv6 Auto Configuration (RFC 4862)
MAC Address (IEEE 802.3)
Static IP
DHCP Client (RFC 2131)
PPPoE
DNS Client
Dynamix 2540
FXO-04 Telephony Gateway
The Dynamix 2540 is a 4 ports FXO (Dynamix FXO-04) VoIP gateway which
transmission over IP broadband access network to makes Dynamix 2540 to be
5
TCP/UDP (RFC 793/768)
RTP/RTCP (RFC 1889/1890)
IPV4 ICMP (RFC 792)/IPV6 ICMP (RFC 4443)
TFTP Client
VOIP VLAN Support (802.1q/802.1p)
HTTP/HTTPS Server
QoS Support
Support IPV4 only, IPV6 only or dual stack mode
1-3 Environmental
Actual Dimension: 35 × 242 × 160 mm (Desktop)
Weight: 0.935kg (unit without packing)
Operating Temp. & Humidity
- Temp. : 0℃～45℃ (32℉～113℉)
- Humidity: 10％～85% relative humidity, non-condensing
Storage Temp. & Humidity
- Temp. : 0℃～55℃ (32℉～131℉)
- Humidity: 10％～95％ relative humidity, non-condensing
AC to DC Power Adaptor:
- INPUT: AC100V-240V, 50/60Hz
- OUTPUT: DC 12V, 1.5A
Regulatory Compliance: FCC (Part 15, Class B) & CE
1-4 Front Panel: LED Indicators
Figure 1-4-1 front panel
LED
Description
Power
When the power adapter is connected, the LED will light
up green.
Status
When system is startup successfully, the LED will light up
Dynamix FXO-04
6
green.
Proxy
When the gateway is registered successfully to a Proxy,
this will light up green.
WAN
This will light up green when the gateway’s WAN port is
physically connected to the public internet. When data is
transmitted through this port, it will flash green.
The default IP of WAN port is 10.1.1.3.
LAN
This will light up green when the gateway’s LAN port is
physically connected to a local network (Refer to Rear
Panel section in page number for location of LAN port).
When data is transmitted through this port, it will flash
green.
The default IP of LAN port is 192.168.123.123.
Line1~Line4
The status LED for FXO port 1-4, this will light up amber
orange when the connected phone is engaged in a
conversation. It will flash amber orange when there is an
incoming call.
1-5 Rear Panel: LED Indicators
Figure 1-4-1 rear panel for FXO
Item
Description
Reset
Press and hold over 5 seconds to reload factory default
setting, this will erase all existing settings configured on
this gateway.
L1 - L4
The status LED for FXO port 1-4. When there is no PSTN
connected, this LED will become blinking. When PSTN is
connected and no talking, the LED will be off. When a line
is using, the LED will become light up. (WellGate 2540
only)
LAN
10/100 Base-T RJ-45 socket for LAN port, connects to PC
for management purpose.
Dynamix FXO-04
7
WAN
10/100 Base-T RJ-45 socket for WAN port, connects to
wide area network.
AC100V~240V
The power socket, input AC 100V~240V, output DC 12V,
6A.
1-6 QUICK SETUP
Note:
Please use Windows XP IE 6.0 web browser or above version to
configure FXO gateway webpage setting. Dynamix products don’t
support other Web Browser such as FireFox to configure.
Login :
Setp1:
and connect the Ethernet cable into WAN or LAN port. Start IE6.0 (or later
default URL which is http://192.168.123.123 (through LAN port) or
http://10.1.1.3 (through WAN port).The screen will display User Name
and Password (the default user id is root and user password is root). (See
figure 1-6-1 web access)
Figure 1-6-1 web access
version) to navigate Dynamix 2540 web management system by typing the
Setup the administrative PC’s IP address to be same as Dynamix 2540
8
figure 1-6-2 Network configure-1)
Figure 1-6-2 Network configure-1
Change Default IP Network:
Step 3: After successfully logon to the system, we need to change the
network configuration. Click Device Setting > Network to setup the service
network interface (WAN) parameters. Enter the deserved IP address, netmask
and default gateway or selected to “DHCP” or “PPPOE”. Apply the change by
clicking Apply button as fig (See Figure 1-6-3 Network configure-2).
Note: If Gateway WAN port are setting in the 10.x.x.x segment, please make
sure that you also change the LAN port to other segment such as 192.168.x.x
Figure 1-6-3 Network configure-2
Step 2: After login, the screen shows the Home page of Dynamix FXO-04. (See
9
Change Default Time setting:
Step 4: When re-logon to the new IP address, the next is to setup the system
time zone. Click Device Setting > Time to setup the system. Enter the
current SNTP server, time zone and daylight saving parameters. Apply the
change by clicking Apply button. (See figure 1-6-4 Time setting)
Figure 1-6-4 Time setting
Modify SIP Account Parameter:
it is necessary for VOIP calling . Click SIP trunk and new to create the
required sip trunk. Enter the trunk ID to 1 and input those SIP parameters.
Apply the change by clicking Apply button. (See Figure 1-6-5 SIP Trunk)
Figure 1-6-5 SIP Trunk
Maintenance > Maintenance > Soft-Reset or Reboot to take effect.
Apply the change by clicking Apply button. (See Figure 1-6-6 Quick-Reset)
Step 6: After modify basic setting. It is required to reset FXO-04. Click
Step 5: The next step is to add a SIP trunk for VOIP calling. For Dynamix 2540,
Soft Reset Dynamix FXO-04:
10
Figure 1-6-6 Quick-Reset
Step 7: After soft-reset or reboot.
>Click Status > SIP Trunk Status to check whether registered or not. (See
figure 1-6-7 SIP trunk status)
Figure 1-6-7 SIP trunk status
1. For PSTN incoming call, the caller will hear a dial tone. Then the caller can
dial a VOIP number and it will use the setup SIP Trunk 1 to make SIP call
out. (2 stage dialing)
PSTN.
Check Dynamix FXO-04Registered Status:
For FXO (Dynamix 2540):
2. For VOIP incoming call, Dynamix 2540 will off hook a FXO port and dial to
Through the above settings, the FXO-04 should able to do the following:
Table of contents
Other Dynamix Gateway manuals
Dynamix
Dynamix IAD 161 User manual
Dynamix
Dynamix DW IAD - 162 User manual
Dynamix
Dynamix DW 4 FXO User manual
Dynamix
Dynamix DW-01 Plus H User manual
Dynamix
Dynamix DW-01/H User manual
Dynamix
Dynamix DW-01 User manual
Dynamix
Dynamix DW1-FXS User manual
Dynamix
Dynamix DW FXS-04 User manual
Dynamix
Dynamix DW IAD-162 User manual
Dynamix
Dynamix DW-01PlusS User manual
Popular Gateway manuals by other brands
LST
LST M500RFE-AS Specification sheet
Kinnex
Kinnex Media Gateway quick start guide
2N Telekomunikace
2N Telekomunikace 2N StarGate user manual
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE user guide
Telsey
Telsey CPVA 500 - SIP Technical manual
