Instruction Manual
DTJ Series Toe Jacks - V1.0 www.durapac.com Page 2 of 12
This is a safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid injury or death
1.0 Product Information
DURAPAC –Hydraulic Toe Jacks are engineered to meet Industrial Standards for Performance and
Safety. The DTJ Series of toe jacks are a premium range ideally suited for lifting heavy machinery or
equipment when access height is restricted. Toe lift capacities range from 2.5-25 ton and all models
feature a keyed toe with spring return piston.
Chrome plated steel piston rod resists corrosion and extends life
Dovetail design for perfect alignment of toe during lift (25 ton jack does not have dove tail
design)
All jacks have been designed for ease of use and handling
Carbon steel base is automatically welded to ensure increased resistance to high pressure
and provide greater durability
Operating handle is included with all models
360° rotating pump handle on models 2.5-15 ton
Internal stroke limiter prevents piston rod over-extension
Lifting toe has been manufactured from high strength alloy steel
All DTJ Series toe jacks are repairable and seal kits are available.
Special skill, knowledge and training may be required for a specific task and the product may not be
suitable for all jobs. The user must ultimately make the decision regarding suitability of the product
for any given task and assume the responsibility of safety for all in the work area. Contact a Durapac
representative if you are unsure of your toe jack’s suitability for a particular application.
2.0 Receiving Instructions
Open packing and confirm that the jack and handle are present and undamaged.
It is recommended prior to use that an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs are replaced with Durapac
authorised replacement parts only. Any toe jack that appears to be damaged in any way, is worn,
leaking or operates abnormally should be removed from service immediately until such time as
repairs can be made. Any toe jack that has been or suspected to have been subject to a shock load
should be removed from service immediately until inspected by a Durapac authorised service centre.
Owners and operators of this equipment should be aware that the use and subsequent repair of this
equipment may require specialised training and knowledge.
3.0 Safety
Save these instructions. For your safety, read and understand the information contained within. The
owner and operator should have an understanding of this product and safe operating procedures
before attempting to use this product. Instructions and safety information should be conveyed in the
operator's native language before use of this product is authorised. Make certain that the operator
