Duerkopp Adler 269 Troubleshooting guide

Other manuals for 269

1

Table of contents

Other Duerkopp Adler Sewing Machine manuals

Duerkopp Adler

Duerkopp Adler 167-372 Guide

Duerkopp Adler

Duerkopp Adler 530-211 User manual

Duerkopp Adler

Duerkopp Adler 1230i-6 Guide

Duerkopp Adler

Duerkopp Adler 556 Guide

Duerkopp Adler

Duerkopp Adler 251-140040 User manual

Duerkopp Adler

Duerkopp Adler 739 Manual

Duerkopp Adler

Duerkopp Adler 4181-3 Troubleshooting guide

Duerkopp Adler

Duerkopp Adler 550-12 Guide

Duerkopp Adler

Duerkopp Adler 540-100-1 User manual

Duerkopp Adler

Duerkopp Adler 868 User manual

Duerkopp Adler

Duerkopp Adler 550-12-12 User manual

Duerkopp Adler

Duerkopp Adler 961-11-1 Guide

Duerkopp Adler

Duerkopp Adler 550-16-26 User manual

Duerkopp Adler

Duerkopp Adler 4220-6 Troubleshooting guide

Duerkopp Adler

Duerkopp Adler 4180i-1 Troubleshooting guide

Duerkopp Adler

Duerkopp Adler 511 User manual

Duerkopp Adler

Duerkopp Adler 219 Guide

Duerkopp Adler

Duerkopp Adler 971 Guide

Duerkopp Adler

Duerkopp Adler 525-105 Guide

Duerkopp Adler

Duerkopp Adler 739-1201 Guide

Duerkopp Adler

Duerkopp Adler 69-373 User manual

Duerkopp Adler

Duerkopp Adler 4181i-1 Guide

Duerkopp Adler

Duerkopp Adler 550-16 Guide

Duerkopp Adler

Duerkopp Adler 739-23 Technical specifications

Popular Sewing Machine manuals by other brands

Riccar

Riccar RL634DE user manual

Singer

Singer 2517 Instruction book

Pfaff

Pfaff 3307-1 SERIES instruction manual

Janome

Janome Quilt Maker Pro 18 VERSA Service manual

Siruba

Siruba C007JP Instruction book

Husqvarna Viking

Husqvarna Viking Designer SE user guide

Singer

Singer 148-5 parts list

IKEA

IKEA SY user guide

Pfaff

Pfaff 571 instruction manual

Singer

Singer 15-91 Adjusters manual

Brother

Brother BB370 Quick setup guide

Pegasus

Pegasus WT100 Series instructions

Reliable

Reliable 7100DB instruction manual

Pfaff

Pfaff 937 instruction manual

Singer

Singer 6038 Instruction book

Singer

Singer 413K parts list

Pfaff

Pfaff 1471 E1 instruction manual

Kenmore

Kenmore 16677 - Serger Sewing Machine Servicing manual

269

Spezialnähmaschine

Serviceanleitung

Instructions for service

Instructions de Service

Instrucciones de servico

Istruzioni per meccanici

Postfach 17 03 51, D-33703 Bielefeld •Potsdamer Straße 190, D-33719 Bielefeld

Telefon (05 21) 9 25- 00 •Telefax (05 21) 9 25 24 35

Ausg./Edition: 01/87 Printed in Federal Republic of Germany Teile-Nr./Part.-No.: 0791 269651 KA

D

GB

F

E

I

General safety instructions

The non-observance of the following safety instructions can cause

bodily injuries or damages to the machine.

1. The machine must only be commissioned in full knowledge of the

instruction book and operated by persons with appropriate

training.

2. Before putting into service also read the safety rules and

instructions of the motor supplier.

3. The machine must be used only for the purpose intended. Use of

the machine without the safety devices is not permitted. Observe

all the relevant safety regulations.

4. When gauge parts are exchanged (e.g. needle, presser foot,

needle plate, feed dog and bobbin) when threading, when the

workplace is left, and during service work, the machine must be

disconnected from the mains by switching off the master switch or

disconnecting the mains plug.

5. Daily servicing work must be carried out only by appropriately

trained persons.

6. Repairs, conversion and special maintenance work must only be

carried out by technicians or persons with appropriate training.

7. For service or repair work on pneumatic systems, disconnect the

machine from the compressed air supply system (max. 7-10 bar).

Before disconnecting, reduce the pressure of the maintenance

unit.

Exceptions to this are only adjustments and functions checks

made by appropriately trained technicians.

8. Work on the electrical equipment must be carried out only by

electricians or appropriately trained persons.

9. Work on parts and systems under electric current is not permitted,

except as specified in regulations DIN VDE 0105.

10. Conversion or changes to the machine must be authorized by us

and made only in adherence to all safety regulations.

11. For repairs, only replacement parts approved by us must be used.

12. Commissioning of the sewing head is prohibited until such time

as the entire sewing unit is found to comply with EC directives.