DSPPA MP9815E User manual
* * Emergency Panel
MP9815E
1
MP9815E
EMERGENCY PANEL
OWNER’S MANUAL
Before operating, please read this manual completely.
FEATURES
Alarm triggering and siren or recorded signal output.
1 minutes digital REC / PLAY IC.
Record Level control.
Output volume control.
* * Emergency Panel
MP9815E
2
FRONT PANEL
1Power switch 4FIRE : manual siren.
2Power indicator 5START : start recording or playing.
3OPTION 6STOP : stop recording or playing.
SIREN : siren signal output. 7 Output level control.
PLAY : recorded signal output. 8 REC level control.
REC : record into IC inside.
REAR PANEL & CONNECTIONS
1 2 3 4 5 6 7 8
Pre Amp. MP9811P
DECK MP9806
emergency
announcement
for recording
Guangzhou DSPPA Audio Co., Ltd.
* * Emergency Panel
MP9815E
3
OPERATING
1、Auto mode
Plug in the mains regardless the position of“POWER”switch and adjust the knob
“VOLUME”properly.
Alarm with siren Put “OPTION”
switch at
“SIREN”position, as soon as an alarm signal
comes into the “ALARM”port，
siren will be sent out from “OUTPUT”port until alarm
released.
Alarm with a message recorded Put “OPTION”switch at “PLAY”position，as soon
as an alarm signal comes into the
“ALARM”
port，
message recorded in inner IC will be sent out
from “OUTPUT”port repeatedly until alarm released.
2、Manual mode
Plug in the mains, turn on“POWER”switch and adjust knob “VOLUME”properly.
Alarm with siren Put“OPTION”
switch at
“SIREN”
,as soon as press down
“FIRE”button
siren will be sent out from “OUTPUT”port until the button released.
Alarm with a message recorded Put “OPTION”switch at “PLAY”position，click
“START”button once，message recorded in inner IC will be sent out from “OUTPUT”
port until click “STOP”button or the message comes to the end. While the message sending
out it also be broken off by click“START”button once again.
3、Recording
Set
“OPTION”
switch at “REC”
position and set “REC LEVEL”
at middle position then
turn the“POWER”switch on. Click“START”button，signals from “LINE”or“MIC”
will be recorded into inner IC chip until press“STOP”button, and it also stop at 1 minutes
later too.
* * Emergency Panel
MP9815E
4
SPECIFICATIONS
Inputs
Mic : 2mV 10kΩ; Line : 1V 10kΩ;
Alarm : 0V/+24V(or open), 0V (short circuit) is valid
Output
SIREN or Recorded Message: 1V
Rec.
IC inside, 60s.
Frequency response
100Hz-10kHz（±3dB）
Protection
AC fuse
Power Requirement
AC 220V/50Hz
Outer Packing Size (mm)
（L×W×H）530×440×195
Unit Size (mm)
（L×W×H）484×365×88
Gross weight
8.8kg
Net weight
7.1kg
Specifications are subject to be changed without notice .
CAUTION
●When the “Power switcher” is off, please pull out the power cord from the socket.Please keep
the equipment out of water.
●To reduce the risk of electric shock, do not remove the cover.
●No user parts inside. Refer servicing to qualified service personnel.
●The symbol on rear panel indicates hazardous live. The connection of these terminals must
be operated by the instructed person.
●The unit connects to the mains by the plug. Pull out the plug when the unit is in fault or danger
status. So the socket for the unit plugging must be set in the place can be easy to plug into and
pull out the plug.
Guangzhou DSPPA Audio Co., Ltd.
Other DSPPA Safety Equipment manuals
Popular Safety Equipment manuals by other brands
Innova
Innova Xtirpa Instruction and safety manual
bolle SAFETY
bolle SAFETY B810 quick start guide
SHENZHEN FANHAI SANJIANG ELECTRONICS
SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T instruction manual
Hiltron security
Hiltron security POWER8E Installation and use manual
Hatco
Hatco B-950P installation guide
Sitec
Sitec TX MATIC operating manual
