Drywise Pre-Heater User Manual6
2.1. General safety information
• Read and understand safety measures before use of the Product.
• Use the product for intended purpose only
• Use the product with caution. The internal components of the product generate
high temperatures that can cause injury. Do not dismantle and reach inside
the product. Allow at least 30 minutes for the product to cool down, before
performing any maintenance or modication.
• Do not modify or change any parts of the product unless the change or
modication is authorised by the manufacturer or this manual.
• Follow standard electrical safety procedures.
• Follow instructions and safety indicators on the screen of the dryer and/or follow
safety warning labels on the product components.
• Install the product to the Drywise drier well. When the device is connected to the
3D printer via lament, the forces of the extruder may pull the device.
• Do not manually pull or push on lament when the product is in operation unless
instructed by the dryer user interface.
• This product is not intended for children.
• Thought3D products (including Drywise Pre-Heater) are not intended for use by
persons with reduced physical and/or mental capabilities, or lack of experience
or knowledge, unless they are supervised or have been given instructions
concerning the use of the product by a person responsible for their safety.
• Do not insert any foreign objects other than lament for FDM/FFF 3D printing
into the pathway of the lament.
2.2. Health and safety
• The product dries third party materials. Please follow the safety procedures of
the manufacturers of such materials
• The product operates with the help of third-party 3D printers. Please follow the
safety procedures of the manufacturers of such devices.
• Third party materials may release volatile organic compounds (VOCs) and/
or ultrane particles (UFPs). It is recommended that the product is set-up in a
well-ventilated area. Please check the safety data sheet of each specic materi-
al for information.
• Thought3D Ltd cannot be held responsible for any adverse effects from the use
and/or performance of these materials.
This guide contains warnings and safety notices:
Provides helpful information to do a task or avoid problems.
Warns against situations that may cause material damage or injury if
the safety instructions are not followed.
2. Safety
