Drop THX Panda User manual
PANDA HEADPHONES
USER MANUAL
For the very first time, a true audiophile
listening experience is no longer reserved
for wired headphones. Delivering the lowest
distortion ever on a wireless headphone,
the Drop + THX Panda puts you closer to
your music than you ever thought possible.
The world’s first headphones to combine THX’s acclaimed
AAA™ linear amplifier technology with premium planar ribbon
drivers, the Drop + THX Panda lets you experience sound just
as the way it was intended.
1
TABLE OF CONTENTS
WARNINGS 03
PRECAUTIONS 04
FEATURES 05
HOW TO USE 06
Wearing 06
Turn On/Off06
Pair Bluetooth 06
Media Controls 07
Calling Controls 07
Charging 08
Wired Use 08
Cleaning 09
LED Meanings 09
Reset Procedure 10
Troubleshooting 11
SPECIFICATIONS 13
Included in Kit 13
General Specs 14
Power 15
Battery 15
Audio 16
Microphone 16
Physical 17
Optional Accessories 17
TRADEMARKS 18
WARRANTY 19
ADDITIONAL L ANGUAGES 20
2
WARNINGS
Please read and keep all safety and
use instructions.
■This set contains small parts which
may be a choking hazard and not
suitable for children under age 3.
■Avoid exposing this product to rain,
liquids, moisture and excessive heat.
■Do not use while driving. Avoid
using the device in areas that
could pose a danger to yourself
or others if you cannot hear while
wearing the headphones.
■Do not continue to use the head-
phones if they emit any loud or
unusual noises or experience a loss
of audio.
■Remove headphones immediately
and power offif the headphones
get warm or hot to the touch.
BATTERIES
Do not attempt to remove the battery
from the headphones or make any
unauthorized alterations. Use this
product only with an agency approved
power supply which meets regulatory
requirements.
HIGH VOLUME
Do not use the headphones at a high
volume for any extended period of
time. It is recommended to set the
volume at a moderate level.
Try turning the volume down before
putting on the headphones. Place
the set over your ears and then
turn the volume up to a level that is
comfortable.
LANGUAGE DISCLAIMER
All voice prompts are in English.
3WARNINGS
PRECAUTIONS
BLUETOOTH
■The headphones use Bluetooth 5.0,
the latest version of the Bluetooth
standard.The range of connectivity
has limitations and variations.
Accessing Bluetooth may not always
be possible and it may drop in or out
in various circumstances. Due to this,
there might be audio delays or
other
connectivity issues. Connection
is
not guaranteed.
■This device complies with part 15
of the FCC Rules and supports
security functions in compliance
with Bluetooth standards.
■These headphones generate, use,
and can radiate radio frequency
waves. Some devices use the same
frequency and thus can cause
interference between devices.
There is no guarantee that inter-
ference will occur or not occur in
every situation.
■If this equipment is suspected to
cause interference, turn the equip-
ment offand on to test. If there is
causality, then try to correct the
interference by increasing the
distance between the headphones
and any receivers, or power down
and move to a new location.
■Drop assumes no liability for leaked
information caused through any part
by the headphones or accessing
of Bluetooth technologies.
4PRECAUTIONS
FEATURES
RIGHT EAR
LEFT EAR
USB-C Port
Directional
Button
Analog 3.5mm
Headphone Jack Microphones
LED Indicator
Adjustable
Headband
5FEATURES
HOW TO USE
WEARING
The directional button should be on right side.The headband is adjustable.
Adjust so the earpieces are comfortably covering the ears.
TURN ON/OFF
1 Locate the directional button on the bottom of the right earpiece.
2 To turn on, press and hold for two seconds until the LED indicator turns
white. An audio cue will sound.
3 To turn off, press and hold the button for three seconds until the white
LED fades. An audio cue will sound.
PAIR BLUETOOTH
1 Locate the directional button on the bottom of the right earpiece.
2 When powering off, press and hold for four seconds.
3 While pairing, the LED indicator will blink blue and red. Pairing is success-
ful once the LED illuminates white.
ADDITIONAL BLUETOOTH NOTES
■The effective range is approximately 30 feet (10 meters).
■The pairing memory can accommodate up to eight devices.
6HOW TO USE
MEDIA CONTROLS
FUNCTION DIRECTION ACTION
Play/Pause Press button once
Next Track Push button right
Previous Track Push button left
Volume Up Push button up
Volume Down Pull button down
Media functions use the directional button.
CALLING CONTROLS
FUNCTION ACTION
Answer Call Press button once
End Current Call Press button once
Reject Incoming Call Press and hold button
Voice Assistant1Quickly press button twice
Calling functions use the directional button.
1Functionality may vary based on phone model.
7HOW TO USE
CHARGING
1 Attach the USB-C cable to the USB-C port on the right earpiece.
2 Connect the USB-C cable to a power source. The headphones can be
charged with any 5V/1A or higher DC charger, powered hub, or USB port
(not included).
ADDITIONAL BATTERY NOTES:
■As headphones charge, the red LED indicator will fade in and out. A full
charge takes approximately two hours with a 5V/1A DC power supply.
■The headphones can also be quick-charged in 10 minutes for 3 hours
of operation.
■From full charge, the battery will last approximately 30 hours in use.
■An auditory cue will sound and the LED will illuminate red when there is
60 minutes of battery life remaining.
■The battery should not be removed or replaced by the user.
■The maximum weight is 5 kg of lithium batteries per package for passenger
and cargo aircraft and 35kg of lithium batteries per package for cargo
aircraft only.
■https://tadiranbatteries.de/pdf/IATA_Lithium_Battery_Guidance_2019.pdf
8HOW TO USE
This manual suits for next models
1
Table of contents
Other Drop Headphones manuals
