Drive BTR22BLK User manual

Bariatric Transport Chair

REF: BTR22BLK

Bariatric Transport Chair (Issued 03/16) Page 2 of 8

Contents

1. Contents

2. Introduction

3. Parts Description

4. Brake Operation

5. Leg Rest Adjustment

6. Leg Rest Removal

7. Arm Rest Removal

8. Quick Release Wheels

9. Using the Stepper Tube

10. Disassembly and Folding

11. Maintenance

12. Warranty

Introduction

The Bariatric Transport chair is designed for a single occupant up to 32

stone (200kg) and is suitable for in indoor and most outdoor environments.

The wheelchair has a 22” seat width, and is propelled by an attendant using

the wheelchair push handles.

Parts Description

Bariatric Transport Chair (Issued 03/16) Page 3 of 8

Brake Operation

Parking Brakes

To apply the parking brakes, push

the handle on the brake unit until

locked in place (see diagram). To

release the brake, push the handle in

the opposite direction.

Note: the model of brake on the wheelchair may be visually different

from that shown.

Leg Rest Adjustment

The height of the footplates on the

leg rests can be adjusted to suit the

user without tools.

To adjust the height, press the brass

push buttons on the leg rest (as

shown left). Adjust the footplate to

the correct height. Release the push

buttons and carry on adjusting the

footplate until they locks in position

with an audible click.

Bariatric Transport Chair (Issued 03/16) Page 4 of 8

Leg Rest Removal

To remove the leg rest, press the

chrome lever on the leg rest whilst

swinging the leg rest out (as shown

left). This will now allow the leg rest

to be lifted up and removed. To

attach the leg rest, place the leg

rest on the two receiver posts on

the wheelchair frame. Then swing

the leg rest inwards until it locks in

position.

Arm Rest Removal

To remove the arm rest, press the

chrome button at the front of the

armrest (arrowed) and pull up on

the armrest.

To replace the armrest, push the

armrest back in to the receivers

and it will automatically lock.

Bariatric Transport Chair (Issued 03/16) Page 5 of 8

Operation and Propulsion

The Bariatric Transport Chair has transit wheels which can only be

propelled by an attendant using the push handles.

Apply the parking brakes when stationary. Refer to the section on

parking brakes for operation instructions.

Use slow speeds on gradients. Do not use on

gradients more than 10º

The wheelchair is only suitable for single occupancy.

The wheelchair user should keep their feet on

the footplates when

moving. Do not stand on

the footplates.

Do not use escalators.

Do not reverse down a gradient.

Maintain proper balance at all times. Usersshould not move their

centre of gravity out of the seating area.

Do not reach for items further than your arm

will extend.

Be aware of hazards in your environment, such as narrow doorways,

steps, household

appliances, children's toys, etc.

We recommend you consult your healthcare professional for advice

about transferring to and from the wheelchair. The parking brakes

should always be applied when transferring.

Bariatric Transport Chair (Issued 03/16) Page 6 of 8

Using the Stepper Tube

Use the stepper tube to raise the front castors (when mounting a kerb for

example). To use, push down on the stepper tube with a foot. Do not raise the

front castors by pushing down on the push handles as this could result in

damage to the wheelchair.

To mount a kerb. Approach the kerb head on. Then the attendant uses the

stepper tube to raise the front castors, and lowers the front castors on the

raised kerb. Finally the attendant should push the wheelchair forward, lifting it

up slightly to mount the kerb if required.

To go down a kerb. Line up the front castors with the edge of the kerb. The

attendant uses the stepper tube to raise the front castors and tip the user

slightly back. Keeping the castors raised, slowly lower the wheelchair down

the kerb.

Warning: When going down a kerb, the front castors must be raised to

prevent the user from falling out. The above are only recommendations and

may not be suitable for all events.

Disassembly and Folding

Before folding, remove any quick release components if required. The

Bariatric Transport Chair has been designed with an easy fold mechanism. To

fold the wheelchair, ensure that the leg rests are removed, or in the forward

position with the footplates flipped up. Holding the front and rear edge of the

seat sling, pull the seat in an upward motion. The wheelchair will naturally fold

up.

Please note though that the wheelchair may be too heavy for some users to

lift. Also be sure to adopt the latest health and safety recommendations

when lifting the wheelchair.

Bariatric Transport Chair (Issued 03/16) Page 7 of 8

Maintenance and Tyre Pressure

The Bariatric Transport Chair is installed with puncture proof solid tyres that

will not require inflation.

Proper care and maintenance is important in order to keep your wheelchair in

good working order. Be

sure that your chair is in proper working order at all

times. A qualified dealer or repair centre should be

consulted for periodic

inspections and repairs:

1. At least once a week, wipe down the frame using a

clean soft cloth. If the

chair is exposed to moisture,

dry the chair immediately. The metal parts of

the chair should be polished once a month with an auto

wax.

2. Clean the upholstery with a mild soap solution,

rinse and wipe dry. Worn or

torn upholstery should be replaced promptly as it may not support your

body weight.

3. Inspect the wheels at least once a month.

Correct any side play by

loosening the lock nut on the axle then tighten the axle just enough to

remove anyplay.

4. Solid tyres require limited upkeep, but need to be cleaned periodically

with a damp cloth.

Solid tyres need to be replaced if they become cracked

or severely worn.

Bariatric Transport Chair (Issued 03/16) Page 8 of 8

Warranty

Your Drive branded product is warranted to be free of defects in

materials and workmanship for one year from date of purchase. This

device was built to exacting standards and carefully inspected prior to

shipment. This warranty is an expression of our confidence in the

materials and workmanship of our products and our assurance to the

customer.

In the event of a defect covered by this warranty, we will at our option

supply parts or replace the device. This warranty does not cover device

failure due to owner misuse or negligence, or normal wear and tear. The

warranty does not extend to non-durable components, such as rubber

accessories, castors and grips, which are subject to normal wear and need

periodic replacement.

If you have any queries or require full warranty conditions, please contact

your Drive stockist.

This does not affect your statutory rights.

Ainley’s Industrial Estate, Elland, GB HX5 9JP

www.drivemedical.co.uk

Table of contents

Other Drive Wheelchair manuals

Popular Wheelchair manuals by other brands

Otto Bock

Otto Bock Skippi plus Service manual

Invacare

Invacare Action 4NG series user manual

SORG

SORG LoopSORG 802 Instructions for use

Designability

Designability WizzyBug User instruction

Vermeiren

Vermeiren RAPIDO instruction manual

Excel

Excel G5 KIDS 0285 user manual

M. Bartels

M. Bartels SA-3 Operation manual

nino robotics

nino robotics NIno user manual

Vermeiren

Vermeiren Turios installation manual

Invacare

Invacare MK5 EX Service manual

Invacare

Invacare Solara Spree GT Owner's operator and maintenance manual

Nova

Nova TKW-12 user guide

BCW

BCW Advantage manual

You-Q

You-Q Luca Service manual

interco

interco Ortolight Standard Operating guidelines

Nova

Nova 7190L owner's manual

Vermeiren

Vermeiren EZ1 instruction manual

PaceSaver

PaceSaver Scout M-300 owner's manual