Drive 15005L Assembly instructions
Owner’s Manual and Assembly Instructions
Model # 15005L
Drive Full Electric Low Height Bed
This manual must be given to the Owner/User
of this bed and should be read carefully before
putting this product into use. Keep manual in
an accessible location for future reference.
Click here to view detailed product information and pricing. Call 800-397-5899 to order today!
TABLE OF CONTENTS
Packaging and Handling........................................................................................................................ 1
Unpacking .......................................................................................................................................... 1
Inspection........................................................................................................................................... 1
Storage .............................................................................................................................................. 1
Assembly Instructions........................................................................................................................... 2
Operation................................................................................................................................................. 6
Hand Control...................................................................................................................................... 6
Caster Lock and Floor Lock Feature.................................................................................................. 6
Bed Rail Installation ............................................................................................................................... 7
Mattress Retainer Adjustment............................................................................................................... 8
Manual Hi/Lo Adjustment Crank ........................................................................................................... 8
Maintenance & Safety Checks............................................................................................................... 9
Warnings ............................................................................................................................................... 10
NOTE: DO NOT operate this product without rst reading and understanding this user manual. Damage or
injury may result from improper use of this product.
1
Packaging / Handling
Unpacking
1. Check cartons for any obvious damage to packaging or contents. If damage is evident,
contact your local Drive Medical dealer/provider.
2. Remove any lose packaging from the cartons.
3. Carefully remove all components from the cartons.
The Two Cartons will contain the following components:
#15215 HeadSpring and Head Board w/casters
#15216 Foot Spring and Foot Board w/ junction box, 3 motor/actuators,
Hand Pendant Control, Emergency Crank Handle.
Inspection
1. Examine each component carefully for damage, scratches, dents or any other visual damage.
2. Carefully remove Tie Wraps holding power cord, hand pendant and drive shaft.
3. Inspect power cord and plug for cuts or damage.
4. Inspect the junction box and motors for damage, loose connections, cuts or damage to the wires.
5. Ensure motor connections to junction box are connected correctly and secure.
Storage
1. If the bed is not assembled immediately, retain cartons and packaging for storage until assembly is
completed.
2. Store the packaged bed in a dry area.
3. DO NOT place other objects on top of the packaged bed cartons.
2
Assembly Instructions
1 Conrm that all parts are present:
A. Foot Spring w/
• 3 motor/actuators
• Junction Box
• Hand Pendant
• Power cord & plug
B. Head Spring
C. Low Height Head Board
D. Low Height Foot Board
E. Hi/Low Drive Shaft
F. Locking Pins (2)
G. Hand Crank
H. Casters (4) – 2 locking, 2 non-locking
I. Head/Foot Pull Tube Transport Straps
A B
I
I
C
D
E
F
G
H
Caution: DO NOT attempt to operate bed controls until completion of assembly as damage to bed
components and/or personal injury may occur.
3
Assembly Instructions (Continued)
2. With the Head and Foot Spring positioned upright, connect Head Spring by aligning with foot spring and
swinging both ends away from each other.
3. Optional: Insert lock pin through connected sleep surface and secure with spring clip.
4. Connect Head Spring and Foot Spring Pull Tube to provide the up/down motion/adjustment of the Head
and Foot Spring Sections:
A. Extend the Head Spring Pull Tube and connect to the Head Spring Lift Arm. Secure in place with the
tethered locking pin and clip
B. Extend the Foot Spring Pull Tube and connect to the Foot Spring Lift Arm.
Secure in place with the tethered locking pin and clip
4
Assembly Instructions Cont.
5. Install the casters by inserting the stem of the
caster into the leg receptacle. It is recommended
to install one locking caster and one non-locking
caster on each bed end. The locking casters
should be installed diagonally from each other.
The 15005L Low Height bed gives you the option of
installing the casters on the inboard non adjustable
legs or the outboard adjustable legs. To achieve
the full low height feature, install the casters on the
inboard non-adjustable legs.
6. Carefully lower the bed frame at onto the oor. Attach the Head
and Foot Boards by tilting the Boards toward your body and aligning
mounting pins located on the Spring Sections with the Hooks on the
Head/Foot Boards.
NOTE: The Head Board is taller than the Foot Board, however, they
are interchangeable with each other.
7. Assemble Hi/Lo Drive Shaft and adjust to the proper length so it will
t between the Head Board drive pin and Hi/Lo Motor drive pin at the
foot end.
• Lift the Head Spring and install the foot end of the Hi/Lo Drive Shaft to the Hi/Lo Motor drive pin, then
install head end of the Hi/Lo Drive Shaft to the Head Board drive pin.
• Hi/Lo Drive Shaft is spring loaded so it will t securely between these two points.
• Adjust length of Hi/Lo Drive Shaft if it is too long or too short.
StemLeg Receptacle
5
Assembly Instructions Cont.
8. Release the spring loaded shaft on
the hi/low motor and insert the shaft
into the gear box on the footboard.
9. Make sure the slot on the spring
loaded shaft engages the roll pin on
the gear box.
10. Raise the Head Spring and Foot Spring to release tension between the springs and connect Head and
Foot spring fabric by squeezing together and attaching with spring links.
6
Operation
Hand Control
The Model #15005L Low Height Bed comes with a 3 Function hand held Pendant.
• Top Buttons control raising and lowering the Head Section;
• Middle Buttons control raising and lowering the Foot Section;
• Lower Buttons control raising and lowering the entire bed.
Caster Lock and Floor Lock Feature
When the bed is in its lowest height position, the Casters will come in contact with the oor and
the bed will roll freely. Engaging the Caster Locks will help hold the bed in place.
When the bed height is raised, the legs will come in contact with the oor and the casters will be raised off the
oor providing a stable base for the bed frame.
7
Bed Rail Installation
The Deck Frame contains labels that provide the location for installing Half Rails and Full Rails.
• On the Head Section and Foot Sections, a Label will indicate the notch location for alignment of the Full
Rail Cross Brace that must be positioned in between the two black springs. A second Label will indicate
alignment for the Half Rail clamp to be positioned with the Black Spring centered between the clamp.
Half Rails Full Rails
8
Mattress Retainer Adjustment
Manual Hi/Lo Adjustment Crank
Before a mattress is laid on the bed, ip up the mattress guard to reduce the movement of the mattress.
In the event of a loss of power or Hi/Lo motor malfunction; the Hi/Lo feature can be manually adjusted using
the Hand Crank. The Hand Crank can be operated in two locations: directly into the Head or Foot board
gear box or from the top of the Head or Foot Board access port.
WARNING: Manual Hi/Lo Adjustment Crank MUST BE REMOVED before the bed is used. Failure to remove
the crank may cause damage to the bed and/or personal injury to those in the room.
Table of contents
Other Drive Medical Equipment manuals
Drive
Drive HANDY-OX 18720 User manual
Drive
Drive Bed assist handle User manual
Drive
Drive 13033 User manual
Drive
Drive 13029 User manual
Drive
Drive Universal cup holder User manual
Drive
Drive MSS Tilt & Recline User manual
Drive
Drive DeVilbiss Eclipse II with Dial Pump User manual
Drive
Drive 13049SV User manual
Drive
Drive 15003 User manual
Drive
Drive 12023 User manual
Drive
Drive OXYMIZER User manual
Drive
Drive MQ3000 User manual
Drive
Drive MEDQUIP MQ3200 User manual
Drive
Drive VacuMax 18610 Manual
Drive
Drive 12025KD-1 User manual
Drive
Drive RTL12068 User manual
Drive
Drive 14508 User manual
Drive
Drive TSE 120 User manual
Drive
Drive Bellavita handset Operating instructions
Drive
Drive 13067 User manual
