Drew Technologies IMclean User manual
IMclean Manual
Note: Before you start, Please Fill out the enclosed
disclosure form send to Drew Technologies
2
LIMITED WARRANTY
Drew Technologies, Inc. guarantees that every IMClean device as well as included accessories
are free from physical defects in material and workmanship under normal use for one year
from the date of purchase. If the product proves defective during this warranty period, email
Drew Technologies Customer Support (support@drewtech.com) in order to obtain a Return
Authorization number. When returning a product, mark the Return Authorization number
clearly on the outside of the package and include your original proof of delivery.
IN NO EVENT SHALL DREW TECHNOLOGIES, INC.'S LIABILITY EXCEED THE
PRICE PAID FOR THE PRODUCT.
Drew Technologies SHALL BE EXEMPT FROM ALL OTHER CLAIMS WHETHER
BASED UPON DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING
SOFTWARE, OR ITS DOCUMENTATION. Drew Technologies, Inc. makes no warranty or
representation, expressed, implied, or statutory, with respect to its products or the contents or
use of this documentation and all accompanying software, and specifically disclaims its
quality, performance, merchantability, or fitness for anyparticular purpose. Drew
Technologies, Inc. reserves the right to revise or update its products, software, or
documentation without obligation to notify any individual or entity. Please direct all
inquiries to:
Drew Technologies
3915 Research Park Dr
Suite A10
Ann Arbor, MI 48108
Phone: (877) 888-2534
Fax: (734) 222-5228
FCC Statement
The wireless module has been tested and found to comply with the FCC part 15 and IC
RSS-210 rules. These limits are designed to provide reasonable protection
against harmful interference in approved installations. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference may not occur
in a particular installation. This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Modifications or changes to this equipment not expressly approved by the part
responsible for compliance may render void the user’s authority to operate this
equipment.
– Modular Approval, FCC and IC
FCC ID: X3ZBTMOD3
IC: 8828A-MOD3
In accordance with FCC part 15, the SPT2632C1A.AT2 is listed above as a
modular transmitter device
3
Introduction
Thank you for choosing IMClean! This Quick Start Guide covers the
initial setup of your device.
Your IMclean Kit includes:
·IMClean
·Driver CD
·Vehicle Cable
·USB cable
·Self Test Cable
·Cigarette Lighter Adaptor Cable.
·External power cable w/Battery clamps
·Bluetooth dongle(only with Bluetooth units)
The vehicle cable is custom made by Drew Technologies, Inc. To
obtain replacement/additional vehicle cables, please contact Drew
Technologies, Inc. Generic vehicles cables, or cables provided from
other tools/devices will not
function with the IMClean interface.
DAD Devic
e, CD, and Bluetooth
dongle
Cables included
DAD Indicator Lights
PC Cable Vehicle Protocol Test
Green = USB
active
Blue = Bluetooth
active
Red = no drivers
installed
Green = ok
Red = no cable
connected or
improper cable
connected
Green = vehicle
connected
No indication =
voltage less than
8V on OBD port.
Try external cable
Green flashing =
communicating
with vehicle
Green solid =
connected to
vehicle
Green = self test
is active
Red = test failed
4
Installing DAD Drivers
Insert the provided driver CD and run the setup application prompted
by the Autorun feature. Follow the steps on-screen to install the
IMclean DAD drivers and vendor applications.
Once installed, all IMclean firmware and USB driver updates will be
performed from the IMClean Support and Updater application located
in Start àAll Programs àDrew Technologies, Inc à
Connecting your DAD - Wired
Note: Even wireless DAD devices will work in wired mode. If you
have purchased a wireless DAD, follow this step to ensure your
wireless DAD also works in wired mode.
Once the setup application is complete, attach your IMclean DAD
device to your PC using the USB port and allow the driver install to
complete. A balloon will appear in the lower right hand corner of your
screen by the system try when the device installation is completed.
5
Connecting your DAD -
Wireless
If you have purchased a wireless DAD, you can now configure it for
wireless use. If you did not purchase a wireless DAD, skip this section.
1. Unpack the TrendNET Bluetooth dongle that you received
2. Plug the Bluetooth dongle into a USB port on your PC and
allow Windows to install the generic drivers. DO NOT use the
manufacturer's drivers.
3. Power your DAD device up. Plug into a vehicle and wait 30
seconds. If you power it up thru USB, Bluetooth will be
disabled.
4. To pair your IMClean, right click on the Bluetooth Icon in the
system tray.
5. Click on "Add Device"
6
7
6. Select your device from the available options, then click next
7. Enter "2534" in the text box and click next pair the IMClean
BT.
8
8. Your IMClean BT has been successfully paired with your
PC.
Install the BAR OIS Software
1. Go to the registration page provided by BAR.
2. Register your Station.
3. Download and run the installer.
4. Start the BAR OIS application; Follow onscreen instructions
regarding setting up your DAD unit.
9
Support & Updater
Application
·For Windows 8 skip to next step. Otherwise go to Start
àAll Programs àDrew Technologies, Inc àBAR OISà
IMClean Support and Updater.
10
·For Windows 8, click on the IMclean Support and Updater
application from the Start page.
Open the application and click next.
Other manuals for IMclean
1
Table of contents
