DPR SCR22 User manual
USER MANUAL
SCR22 / SCR22PL / SCR35 / SCR35PL
this product is certified:
WITH GRAPHTEC CE7000-40
REV. 02
IMPORTANT: Please keep the original packaging in
case you need to return the material. If we receive the
system in non-original packaging, the warranty will be
void.
IMPORTANT: The latest version of the Scorpio Series
software is available on our websites
or ,section “Download”.
I N D E X
2
.....................................................................................page 3
...............................................................................page 3
.................................................................................page 3
......................................................................page 4
.........................................................................page 6
....................................page 7
...................................................................page 8
.................................................................................page 9
...............................................................................page 9
......................................................................page 9
...........................................................page 10
..........................................................page 12
................................................page 13
.................page 13
.............................................................page 15
.................................................................................page 15
...........................................................................................page 16
...................................................................................page 16
.............................................................................page 17
........................page 17
.................................................................page 18
................................................................................page 18
...............................................................................page 19
.....................................................................page 19
....................................page 21
...................................................................................................page 22
........................................................................page 22
.......................page 23
........................................................................page 24
................................................page 24
..................................................page 24
................................................................................page 25
..............................................................................page 27
...................................................................page 27
....................................................................page 28
...........................................................................................page 29
System requirements
How to install outer discs
How to install the plotter
How to install the cutting plotter
How to install the core holder
How to load and operate with the lamination module
How to set the lamination sensor
How to adjust the clutch
When to adjust the clutch
Load the media into the plotter
How to run the cut test and start a job
How load the matrix remover & slitter
How to load the matrix remover core holder
How to load the rewinder core holder and set the slitter module
How to add or remove blade holder
Metal guide alignment
Error Messages
Black-mark detection
Black-mark position in the media
How to cut blank labels
How to update software
How to restore plotter settings
How and when to reduce the plotter feeding speed
Media path
Ultrasonic sensor calibration
Lamination / matrix remover&slitter modules speed rotation
How to install pressing roller
Adaptor for the Scorpio SCR35 / SCR35PL
How to used the o-ring on the matrix roller
Graphtech mantenaice
How to replace the knife
How to replace the slitter blade
How to replace the cutting mat
Troubleshooting
The cutting manager works on windows
OS from vista. We do not guarantee its
functionality on windows XP.
Corel Draw (PDF).
panel.
3
Using a screwdriver, install the outer disc on
the Core Holder for printed rolls.
SYSTEM REQUIREMENTS
HOW TO INSTALL OUTER DISC
HOW TO INSTALL THE PLOTTER
A. Pull the plotter from the packaging and place it on the plate, make sure to push the
rubber feet into the holes.
B. Plug the machine and switch on.
A B
1. Click on “SetupScorpioCM...” and follow
the step by step instructions to complete
the installation.
Please DO NOT connect the scorpio
USB to your pc before the installation is
complete
2. Click NEXT
4. Click NEXT 5. Click YES
6. In process
HOW TO INSTALL THE CUTTING PLOTTER
7. Click NEXT
4
3. Click NEXT
9. Click OK
10. Click NEXT (Remove the scorpio USB
from your pc, and turn o the scorpio)
11. Click NEXT
12. Choose the right model name of your
Graphtec (CE7000-40).
Click NEXT
13. Wait until the sign “Update for
the Graphtec CE7000-40 driver was
completed” shows up. You may need to
restart the computer.
Click OK
The installation is completed. A ScorpioCM shortcut is displayed on your desktop
5
8. Click FINISH
Plug in the USB camera and the USB dongle, they will auto-install.
If your computer already has a camera installed, we recommend disabling it. If you
do not, your pc will ignore the camera on the plotter.
CM Software will generate a folder in the Windows start menu.
If the USB dongle is not installed correctly
or is unplugged, the following error will
appear.
The grey handle must match with the
grey holder and the black handle with
the black holder.
IMPORTANT: screws must be face
down.
HOW TO INSTALL THE CORE HOLDER
HOW TO LOAD AND OPERATE THE LAMINATION MODULE
IMPORTANT:
If you don’t use the lamination roll
please cover the sensor with the blue
cap.
Just for SCR22PL and SCR35PL models
6
Load the printed roll and move it against
the roll guide. Tighten the core holder.
Load the lamination roll, move it along
the supply shaft and make sure the
lamination is aligned with the media roll.
IMPORTANT: the lamination roll always
needs to be narrower than the web width.
Example: if the web width is 7” then the lamination roll
needs to be lesser than 7” (let’s say ¼ inch on each end).
At this point you can tighten the core
holder.
When the LEDs on the control board
feeding.
Move the media through the rollers and
press the FORWARD button. The media
will be loaded through the rollers whereas
if you push the BACKWARD button, the
rollers will roll the media backwards.
Load an empty cardboard core onto
the shaft intended for laminate liner
rewinding. Tighten the core holder.
Core Holder No. 1 intended for laminate
use
Core Holder No. 2 intended for laminate
liner use
Core Holder No. 3 intended for printed roll
use
1 2
3
7
This manual suits for next models
3
Table of contents
Other DPR Finisher manuals
