Table of Contents Technical Manual
4 04043552 - 07/2017Terminal 97 00
4.4.2 Parametrization 36
4.4.3 Authorizations 36
4.4.4 Data from the terminal 36
4.4.5 Operating states 37
4.4.6 Devices with biometric reader 37
4.5 Authentication types 38
4.5.1 Mode 1: Identification 38
4.5.2 Mode 2: Verification 38
4.5.3 Mode 3: Verification (ID) 38
4.5.4 Mode 4: Combination of modes 1 and 2 38
4.5.5 Mode 5: Combination of modes 2 and 3 38
4.5.6 Alternative types of authentication 39
4.5.7 Additional PIN entry 39
4.6 CardLink 40
5 Installation 41
5.1 Installation conditions 41
5.1.1 General 41
5.1.2 Installation site 41
5.1.3 Connections 41
5.1.4 Power supply 42
5.1.5 Cable entry 43
5.2 Installation lines 44
5.2.1 24 V DC power supply 44
5.2.2 Mains voltage supply 44
5.2.3 Ethernet 44
5.2.4 Inputs/Outputs 44
5.3 Fastening the docking station 45
5.4 Connections 46
5.4.1 Connecting the network cable 46
5.4.2 Connecting the mains voltage 46
5.4.3 Mains fuses 47
5.4.4 Connecting 24 V DC power supply 48
5.4.5 Digital inputs 49
5.4.6 Relay outputs 50
5.4.7 Connecting an external reader 51
5.5 Uninterruptible power supply UPS510 52
5.6 Fasten the terminal housing to the docking station. 53
6 Commissioning 54
6.1 Network requirements 54
6.1.1 Communication 54
6.1.2 Comparing finger templates 54
6.1.3 Automatic registration via B-COMM 54
6.2 Automatic registration via B-COMM 55
6.2.1 Cancelling automatic registration 55
6.3 Manual settings 56
6.4 Settings via the Kaba test program 57
6.4.1 Service language 57
6.4.2 Reader settings 57
6.5 Service Interface 60
6.5.1 Remote access 60
6.5.2 Accessing the service interface locally from the B-Client HR30
terminal software. 61
6.5.3 Accessing the service interface locally from the BaseApp 62
6.6 Android system settings 63
6.6.1 Network settings 64
6.6.2 Settings for adjustment to the environment 67
6.7 Reader initialization 68
6.7.1 LEGIC 68
6.7.2 MIFARE (ARIOS) 69
6.7.3 MIFARE (Baltech) 69
6.8 SFTP server 70
