Dormakaba ED50 User manual

ED50/ED100/ED250

Swing Door Operators

Installation in Overhead Concealed Header

Owner's Manual

DL4616-011 – 09-2021

| EN |

2ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Table of Contents

Table of contents 

 General information 

 To our customers 

 What you should know 

. Distributor information 

. ED low energy operator 

. ED/ED operator power

configuration 

. Low energy power operated swinging doors

ANSI/BHMA A. 

. Power operated swinging doors

ANSI/BHMA A. 

. Mode switch panel 

 AAADM safety information labels 

. Safety information label, full energy swing

doors (ANSI/BHMA A.) 

. Safety information label, low energy swing

doors (ANSI/BHMA A.) 

 Daily safety check procedure 

. Full energy power operated swing door

(ANSI/BHMA .) 

. Low energy power operated swing door

(ANSI/BHMA .) 

 General safety related items 

. Full energy power operated swing door

(ANSI/BHMA .) 

. Low energy power operated swing door

(ANSI/BHMA .) 

Table of contents

 ED/ED/ED door signage 

. ED/ED operator configured for full

energy 

. ED operator and ED/ED

operator configured for low energy 

. Door signage, full energy power operated

single swing doors (ANSI/BHMA .) 

. Door signage, low energy power operated

single swing doors (ANSI /BHMA .):

initiation of door operation 

. Door signage, full energy power operated

double swing doors (ANSI/BHMA .) 

. Door signage, low energy power operated

double swing doors, initiation of door

operation (ANSI/BHMA .) 

. Door signage, full energy power operated

double egress swing doors

(ANSI/BHMA .) 

 ED//ED header

maintenance 

. ED/ED/ED environment and

cleaning 

. Operator status LEDs 

ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 1

. ED/ED/ED OHC header Installation.

NOTICE

Exterior door use.

To insure proper suitability for exterior door

use, the following topics must be addressed in

the context of the door application setting.

• Site-specific use factors such as high wind

conditions and/or building pressure.

• Door width, height, weight, and usage

patterns.

• Observable prevailing conditions at the

opening under which the operator is

expected to perform. In some instances, this

may require increased force settings to

counteract these conditions.

• Door mounted presence sensors.

When attempting to overcome these forces,

it is strongly suggested that door mounted

presence sensors be employed to enhance

pedestrian safety through the opening.

 General information

Fig.1.1 Single door OHC header with overhead arm

. Manual storage.

This document must be kept in a secure place, and

accessible for reference as required.

If the door system should be transferred to another

facility, insure that this document is transferred as well.

. dormakaba.us website.

Manuals are available for review, download, and printing

on dormakaba.us website.

. Dimensions

Unless otherwise specified, all dimensions are given in

inches (“).

. Symbols used in this manual.

WARNING

This symbol warns of hazards which could result

in personal injury or threat to health.

NOTICE

Draws attention to important information

presented in this document.

. Owner's manual.

This Owner's manual applies to dormakaba

ED/ED/ED swing door operators packaged

in an overhead concealed header (OHC).

Fig. 1.2 ED50 low energy OHC operator

Fig.1.3 ED100/ED250 OHC operator

4ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 2

 To our customers

We are pleased that a dormakaba

ED/ED/ED overhead concealed header (OHC)

assembly has been selected for this swing door

installation. dormakaba USA Inc. designed, tested and

built this assembly to provide many years of service.

The purpose of this manual is to familiarize you with

your ED/ED/ED overhead concealed header

installed on a swing door.

It is essential that you "know your system" and that you

recognize the importance of maintaining your door

system in compliance with industry standards for safety.

It is your responsibility as owner and caretaker of the

equipment, to inspect the operation of your door system

on a daily basis as outlined in Chapter , Daily Safety

Check Procedure to insure that it is safe for use by your

customers and employees.

WARNING

Should the door fail to operate as prescribed

in the Safety Information Checklist or at any

other time for any reason, do not attempt to

repair or adjust the ED/ED/ED

overhead concealed swing door system!

Call your local authorized dormakaba USA Inc.

distributor for repair.

The distributor's AAADM certified technicians are

trained to install and service the ED/ED/ED

overhead concealed swing door system using the

dormakaba USA, Inc. Installation and Setup Manuals

and in accordance with ANSI/BHMA safety standards.

. Service availability.

dormakaba USA Inc. has a nationwide network of

authorized distributors for sales, installation and service

of its products.

. Compliance with industry standards for safety.

Your ED/ED/ED overhead concealed swing

door system was designed to the latest ANSI/BHMA

operating and safety standards. In order to insure the

continued safe operation of the door, it is important

that:

• Proper decals and labels be applied and maintained

on your doors (Chapter ).

• If decals and labels have been removed, or cannot be

read, contact your local authorized dormakaba USA

Inc. distributor for replacement decals or labels.

ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 3

 What you should know

.. dormakaba USA Inc. distributor information.

Be sure that the dormakaba USA Inc. distributor has

provided the following information for each door

installation:

. dormakaba USA Inc. ED/ED/ED Overhead

Concealed Owner's Manual DL-.

. Review of:

• Daily Safety Check Procedure (Chapter ).

• General Safety Related Items (Chapter ).

. Instructions on how to conduct the daily safety check

procedure by walk through example.

. Annual compliance inspection label completion

(Chapter ).

. Circuit breaker or disconnect location for  Vac

power to the ED/ED/ED overhead

concealed header.

. ED/ED/ED Mode switch panel location

and instructions in its use (Para. .).

. Discussion of problems that could result from

ED operator being allowed to operate after a

malfunction observed.

. Number to call for service or questions about your

system if you are uncertain of any condition or situation.

WARNING

If there are any problems, discontinue door

operation immediately and secure the door in

a safe manner.

Call your local dormakaba USA Inc. distributor

for repair.

. Distributor information

.. Knowing act definition (ANSI/BHMA A.).

Any conscious action with the expected result of opening

a door. This includes but is not limited to:

• Wall or jamb mounted contact or non contact

switches such as pushplates.

• The action of of manually opening (pushing or

pulling) a door.

• Controlled access devices such as keypads, card

readers, wireless transmitters and key switches.

. Low energy power operated

swinging doors

ANSI/BHMA A.

.. Low energy power operator door definition

(ANSI/BHMAA.).

A door with a power mechanism that opens the door

upon receipt of a knowing act signal, does not generate

more kinetic energy than specified in the ANSI/BHMA

A. standard, and is closed by a power mechanism

or other means.

. Power operated swinging doors

ANSI/BHMA A.

.. Power operated door definition

(ANSI/BHMA A.).

The combination of door, operator, controls and sensors

constituting the system. (also called automatic door.).

. ED/ED operators can be configured for:

• Low energy (Para. .).

• Power operated (full energy) (Para. .).

. ED/ED operator power

configuration

. ED low energy operator

ED operator is available only as a low energy operator

(Para. .).

6ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 3

. Mode switch and Exit Only switch panel

.. Mode switch position descriptions.

Auto

. Door opens automatically when one of the activators

is actuated or triggered.

Door closes on expiration of adjustable hold open

time with no activators or actuators triggered.

. With knowing act device actuation (Para. ..).

Door will remain at full open position for not less

than  seconds.

. With push/pull actuation of door (Para. .).

Door will remain at full open position for not less than

 seconds.

. Door will remain closed, or if door is open door will

close.

Open

. Door opens automatically and remains open.

.. Exit Only switch position descriptions.

. Exterior activation sensor or knowing act device

disabled when door fully closed.

• Only interior activation sensor or knowing act device

will enable door opening.

Off

. Both interior and exterior activation sensors or

knowing act devices will enable door opening.

.. Exit Only switch

positions.

1Mode switch panel

2Mode switch,

three position

Auto

Fig. 3.6.2 Auto

.. Mode switch

positions.

Fig. 3.6.3 Close

Fig. 3.6.4 Open

Fig. 3.6.5 On

Off

Fig. 3.6.6 Off

Open

Fig. 3.6.1 Mode switch and Exit Only switch panel

3Exit only switch,

two position

4RJ45 Comm port for

service

Fig. 3.6.7 Optional key switch panels

ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 4

.. Full energy automatic swing door safety

information label.

This AAADM label (Fig. ..) outlines safety checks that

should be performed daily on a swing door controlled by

an ED/ED OHC operator configured for full

energy operation (ANSI/BHMA .).

.. Safety information label location.

Place label in a protected, visible location on door frame,

near program switch panel if possible.

.. Annual compliance section of label.

This section of label is only completed on automatic

swing doors that comply with ANSI/BHMA A.

standard and pass inspection by an AAADM certified

dormakaba USA Inc. technician.

.. Additional annual compliance inspection labels.

Place additional labels (Fig. ..) over annual

compliance inspection section of safety information

label.

ANNUAL COMPLIANCE

INSPECTION

INSPECT FOR AND

COMPLIES WITH ANSI

A156.10 ON:

DATE: _____________

by AAADM Certiﬁed

Inspector

Number: ____________

Fig. 4.1.2 Annual

compliance

label, full

energy

SAFETY INFORMATION

Automatic Swinging Doors

. Walk toward the door at a

normal pace. The door

should open when you ar

about 4 feet from the door.

. Stand motionless on

threshold for at least 10

seconds. The door shoul

not close.

. Move clear of the area. Th

door should remain open for

at least 1.5 seconds and

should close slowly and

smoothly.

. Repeat steps1 through 3

from other direction if door

is used for two way trafﬁc.

. Inspect the ﬂoor area. It

should be clean with no

loose parts that might caus

user to trip or fall. Keep

trafﬁc path clear.

. Inspect door's overall

condition. The appropriat

signage should be present.

. Have door inspected by a

AAADM certiﬁed inspecto

at least annually.

AAADM

American Association of Automatic

Door Manufacturers

ANNUAL COMPLIANCE

INSPECTION

INSPECT FOR AND

COMPLIES WITH ANSI

A156.10 ON:

DATE:______________

by AAADM Certiﬁed

Inspector

Number:___________

AAADM-2496

DO NOT USE DOOR if it fails

any of these safety checks of if

it malfunctions in any way. Call

a qualiﬁed automatic door

service company to have door

repaired or serviced.

See Owner’s manual or

instructions for details on

each of these and other

safety items. If you need

a copy of the manual,

contact the manufacturer.

These minimum safety checks,

in addition to those in the

Owner’s Manual, should be

made each day and after any

loss of electrical power

Fig. 4.1.1 Full energy safety

information label

. Safety information label, full energy swing doors (ANSI/BHMA A.)

 AAADM safety information labels

8ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 4

SAFETY INFORMATION

Low Energy Swinging

Doors

. Activate the door. Door

should open at a slow

smooth pace (4 or more

seconds), and stop withou

impact.

. Door must remain fully open

for a minimum of 5 seconds

before beginning to close.

. Door should close at a slow,

smooth pace (4 or more

seconds), and stop without

impact.

. Inspect the ﬂoor area. It

should be clean with no

loose parts that might cause

user to trip or fall. Keep

trafﬁc path clear.

. Inspect door‘s overall

condition. The appropriate

signage should be present

and the hardware should

be in good condition.

. Have door inspected by an

AAADM certiﬁed inspector

at least annually.

AAADM

American Association of Automatic

Door Manufacturers

ANNUAL COMPLIANCE

INSPECTION

INSPECT FOR AND

COMPLIES WITH ANSI

A156.19 ON:

DATE:______________

by AAADM Certiﬁed

Inspector

Number:___________

AAADM-3044

DO NOT USE DOOR if it fails

any of these safety checks of if

it malfunctions in any way. Call

a qualiﬁed automatic door

service company to have door

repaired or serviced.

See Owner’s manual or

instructions for details on

each of these and other

safety items. If you need

a copy of the manual,

contact the manufacturer.

These minimum safety checks,

in addition to those in the

Owner’s Manual, should be

made each day and after any

loss of electrical power.

Fig. 4.2.1 Low energy safety

information label

. Safety information label, low energy swing doors (ANSI/BHMA A.)

.. Low energy swing door safety information label.

This AAADM label (Fig. ..) outlines safety checks that

should be performed daily on a swing door controlled by

an:

• ED OHC operator.

• ED/ED OHC operator configured for low

energy operation (ANSI/BHMA A.).

.. Safety information label location.

Place label in a protected, visible location on door frame,

near operator power switch if possible.

.. Annual compliance section of label.

This section of label is only completed on low energy

swing doors that comply with ANSI/BHMA A.

standard and pass inspection by a AAADM certified

dormakaba USA Inc. technician.

.. Additional annual compliance inspection labels.

Place additional labels (Fig. ..) over annual

compliance inspection section of safety information

label.

ANNUAL COMPLIANCE

INSPECTION

INSPECT FOR AND

COMPLIES WITH ANSI

A156.19 ON:

DATE: ______________

by AAADM Certiﬁed

Inspector

Number: ___________

Fig. 4.2.2 Annual

compliance

inspection

label

ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 5

 Daily safety check procedure

NOTICE

All figures and diagrams are for purposes of

illustration only and are from AAADM power

operated pedestrian door manual, reprinted

with permission.

.. Performing daily safety checks.

Perform safety checks daily on your automatic swinging

door to insure your customer and employee safety.

The daily safety checks are listed in Chapter , AAADM

safety information labels.

TIPS AND RECOMMENDATIONS

Perform these checks while traffic is restricted

from all detection and sensing zones.

.. Sensor activation, safety sensor detection.

. Check activation sensor by walking toward door

opening at moderate speed, door should:

• Start opening when you are about four feet from

door.

• Open smoothly.

• Stop at fully open without impact.

. Move slowly through door opening (approximately six

inches/second) stop in door swing path, and pause

for ten seconds.

• Door should remain open.

. If two way traffic, repeat from other side of door.

. Step out of sensor zone activating area.

• After a brief delay (minimum . seconds) door

should close smoothly and without impact.

. For one way traffic, approach safety side of door and

have someone else approach activating side.

• Door equipped with overhead mounted safety sensor

(Fig ..), as long as you are in safety area of door it

should not open.

• Door equipped with door mounted safety sensors

(Fig .., Fig. ..), door may start to open but

should reverse, stop or slow down.

. Stand motionless in door for at least  seconds.

• Door equipped with overhead mounted presence

sensor (Fig ..), door should not close.

• Door equipped with door mounted safety sensors

(Fig .., Fig. ..), door may start to close but

should reverse, stop or slow down.

Fig. 5.1.1 One way traffic, overhead mounted safety

sensor

Fig. 5.1.2 One way traffic, door mounted safety sensors

. Full energy power operated swing door (ANSI/BHMA .)

Minimum

activating

detection

zone

Guide rail

Safety

detection zone

43”

[1092 mm]

Clear door

opening

Minimum

activating

detection

zone

Guide rail

Safety beam

Safety zone

10 ED50/ED100/ED250 09-2021DL4616-011

dormakaba ED50/ED100/ED250 Owner's Manual

Overhead concealed header

Chapter 5

Fig. 5.1.3 Two way traffic, activating and safety

detection zones with door mounted safety

sensors

Safety zone

Minimum

activating

detection

zone

43”

[1092 mm]

Edge of open door

plus 55” [1397 mm]

minimum guide rail

and activation

Minimum

activating

detection

zone

.. Swing door double egress; knowing act switch

activation.

. Double egress doors are commonly activated by

knowing act switch(es).

. Operate knowing act device, doors should:

• Open smoothly and stop at fully open without

impact.

• Remain open for a minimum of five seconds before

closing.

. As door closes, approach door from approach side:

• Door should reopen.

. Continue across threshold and stand motionless for

 seconds:

• Door should not contact you.

Safety zone

Pivot

Push plate

Fig. 5.1.5 Door mounted safety sensors

Fig. 5.1.4 Overhead safety sensors

Secondary

activation

zone

Secondary

activation

zone

Safety

zone

Safety

zone

Push plate

. Continue through door, the door should:

• Start closing after a minimum of five seconds.

• Close smoothly and without impact.

. Approach safety zone side of door:

• If door equipped with overhead safety sensor

(Fig. ..) door should not open as long as you are in

safety zone when door closed.

• If door equipped with door mounted safety sensor

(Fig. ..) door may start to open but should

reverse, stop or slow down.

Other manuals for ED50

This manual suits for next models

Table of contents

Other Dormakaba Door Opening System manuals

Dormakaba

Dormakaba TS93 GSR PT User manual

Dormakaba

Dormakaba 8900 TDE User manual

Dormakaba

Dormakaba 8600 EMF User manual

Dormakaba

Dormakaba HSW EASY SAFE User manual

Dormakaba

Dormakaba LA GARD 700 Series User manual

Dormakaba

Dormakaba ED50 User manual

Dormakaba

Dormakaba PT 10 User manual

Dormakaba

Dormakaba Muto Premium XL150 User manual

Dormakaba

Dormakaba 8600 FH User manual

Dormakaba

Dormakaba ED50 User manual

Dormakaba

Dormakaba 8900 PT User manual

Dormakaba

Dormakaba ED50 User manual

Dormakaba

Dormakaba 7400 FH User manual

Dormakaba

Dormakaba C800 User manual

Dormakaba

Dormakaba UNIVERSAL GK 50 User manual

Dormakaba

Dormakaba UNIVERSAL PT 29 User manual

Dormakaba

Dormakaba ED250 User manual

Dormakaba

Dormakaba ED50 User manual

Dormakaba

Dormakaba ED50 User manual

Dormakaba

Dormakaba SVI 2 Series Training manual

Dormakaba

Dormakaba FFT FLEX Green Installation and operation manual

Dormakaba

Dormakaba 8900 FT User manual

Dormakaba

Dormakaba 8900 T User manual

Dormakaba

Dormakaba ES 200 User manual

Popular Door Opening System manuals by other brands

Pamex

Pamex KT-INP35 Installation instruction

Label

Label NEPTIS/LE installation manual

Cal-Royal

Cal-Royal N-F77CVR Installation instruction

Scrigno

Scrigno OPEN1000 Assembly manual

TriMark

TriMark UM 34 instructions

BFT

BFT WIND RMB 130B 200 installation manual

Alecto

Alecto ADI-250 user manual

Besam

Besam Swingmaster MP Installation, adjustment and maintenance instructions

CRL

CRL SENIOR PRIMA manual

Assa Abloy

Assa Abloy SARGENT 1431 Series instructions

GAL

GAL MOVFR Quick setup

Olide

Olide 120B installation manual

Normstahl

Normstahl IDO7 installation manual

Häfele

Häfele Finetta T 70 VF manual

AGS

AGS D-PL Instructions for fitting, operating and maintenance

Stanley

Stanley MA900ñ Installation and owner's manual

WITTUR

WITTUR Hydra Plus UD300 Instruction handbook

Alutech

Alutech TR-3019-230E-ICU Assembly and operation manual