Dorma TS93 Series User manual

QTY

(1)

M5 HEX KEY M5 HEX KEY

(REFERENCE UNIT CARTON LABEL FOR ACCESSORIES AND OPTIONS SUPPLIED)

TS93 STH

PULL SIDE TRACK MOUNT

Determine hand of door and degree of deadstop required.

Prepare door and frame for fasteners

according to template 08280612.

LEFT HAND DOOR RIGHT HAND DOOR

Attach mounting plate to frame using lower four QTY

(4) WOOD

FRAME

METAL

FRAME

RIGHT HAND DOOR LEFT HAND DOOR

QTY

(4)

Attach closer to mounting plate.

RIGHT HAND DOOR LEFT HAND DOOR

RIGHT HAND DOOR

Attach arm to pinion of closer, parallel to door.

holes in plate. Arrows on plate point up.

LEFT HAND DOOR

Rev.08/09INSPK NO. 08280610

www.dorma-usa.com 1-800-523-8483 PAGE

Description:

INS NO. Rev.

08280611 08/09

1 of 3

METAL

QTY

(2) WOOD

DOOR

143

ACTION

7Adjust sweep, latch, backcheck and delayed

action valves.

1 - SWEEP speed from

2 - LATCH speed from approx.

70° to 0°

7° to 0°.-(INCREASE ONLY)

DECREASE

INCREASE SWEEP

RANGE

LATCH RANGE

CAUTION: DO NOT REMOVE VALVES.

BACKCHECK RANGE

4 - DELAY speed from max opening 180° to 70°

CAUTION: DO NOT CLOSE VALVE COMPLETELY.

DECREASE

INCREASE

BACKCHECK (INTENSITY)

3 - BACKCHECK cushion effect.

DELAY

RANGE

screw and tighten securely. Install track cover.

Attach arm to slide shoe.

Align hole in arm with slide shoe in track. Insert

QTY

(1)

5/64" HEX KEY

5Assemble track and attach to door.

Attach track to door using track mounting screws.

Insert slide shoe and end blocks into track with spring block

near the hinge side of door frame.

HOLD OPEN ADJUSTMENT

ADDITIONAL INSTRUCTIONS (HOLD-OPEN UNITS):

hex key into the slide shoe bolt. Turn clockwise to increase

or counterclockwise to decrease holding force.

3. Open door until slide shoe engages with hold-open.

4. To release the door, pull until the slide shoe disengages.

2. Adjust the holding force by inserting a 5/64"

on, opposite direction off.

1. Adjust hold-open to on or off position. One direction

M5 HEX KEY

SPRING ON HINGE SIDE

08280611 2 of 3 08/09

INS NO. PAGE Rev.

END COVERS

adjusted to meet barrier-free forces may not have sufficient

Take an opening force reading from

CAUTION: DO NOT OVERTIGHTEN

to meet the barrier-free requirement. Maximum number of

clockwise =12. Depending on opening conditions, a door

turns counter clockwise=5. Maximum number of turns

power to reliably close and latch the door.

ULC LABELED UNITS "ONLY"

NON-BARRIER-FREE OPENINGS:

Adjust according to chart.

Adjust spring tension, if required.

TS93-1 supplied with a size 2 spring setting.

CRITICAL

the pull on the door. If required, adjust the spring tension

REFERENCE LABEL ON CLOSER FOR MINIMUM/MAXIMUM SETTINGS

BARRIER-FREE OPENINGS -

+12

200 5

WEIGHT (LBS)

CLOSER

TS93-1

TYPE

100

150

125

DOOR

3'6"

2'6"

3'6"

MAX.

2'6"

---

SPRING

ADJUSTER

OF SPRING

SIZE

FULL TURNS

+12

SPRING ADJUSTER

FULL TURNS OF

INT.

DOOR WIDTH

EXT. CLOSER

SIZE

M5 HEX KEY

NOTE:

TS93-5 supplied with a size 6 spring setting.

NOTE:

Maximum number of turns clockwise = 6

TS93-1

SPRING ADJUSTER

FULL TURNS OF

4' 6"

TS93-5 DOOR WIDTH

EXT.

3' 6"

INT.

4' -4 6

CLOSER

SIZE

-4

200

250

TS93-5

08280611 3 of 3 08/09

INS NO. PAGE Rev.

screw.

Secure with locking

TAB

COVER

cover onto plate.end caps.

Slide end covers over closer body

REMOVE

Remove tab that aligns with arm hub. Slide

Install cover.

This manual suits for next models

Popular Door Opening System manuals by other brands

Pamex

Pamex KT-INP35 Installation instruction

Label

Label NEPTIS/LE installation manual

Cal-Royal

Cal-Royal N-F77CVR Installation instruction

Scrigno

Scrigno OPEN1000 Assembly manual

TriMark

TriMark UM 34 instructions

BFT

BFT WIND RMB 130B 200 installation manual

Alecto

Alecto ADI-250 user manual

Besam

Besam Swingmaster MP Installation, adjustment and maintenance instructions

CRL

CRL SENIOR PRIMA manual

Assa Abloy

Assa Abloy SARGENT 1431 Series instructions

GAL

GAL MOVFR Quick setup

Olide

Olide 120B installation manual

Normstahl

Normstahl IDO7 installation manual

Häfele

Häfele Finetta T 70 VF manual

AGS

AGS D-PL Instructions for fitting, operating and maintenance

Stanley

Stanley MA900ñ Installation and owner's manual

WITTUR

WITTUR Hydra Plus UD300 Instruction handbook

Alutech

Alutech TR-3019-230E-ICU Assembly and operation manual