Doorson 300 THALES User manual
USER MANUAL
AUTOMATIC SLIDING DOOR PRODUCT LINE 300
1/25/2016
product line
3 I USER MANUAL
CONTENT
INTRODUCTION ................................................................................................4
MANUFACTURER CONTACT ....................................................................................5
PRODUCT DESCRIPTION .......................................................................................5
PRODUCT PURPOSE ...........................................................................................6
TECHNICAL DATA ..............................................................................................7
MAXIMUM DOOR DIMENSIONS AND WEIGHTS ...........................................................7
PRODUCT LINE 300 ............................................................................................8
SAFETY RECOMMENDATIONS ..................................................................................9
DOOR OPERATION ............................................................................................10
MODE SELECTION ......................................................................................10
COM20 ................................................................................................11
COM21 ................................................................................................11
ADDITIONAL ENTRIES ..................................................................................12
IN CASE OF POWER FAILURE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
EXIT AND ENTRANCE INTO THE BUILDING...............................................................13
ENERGY SAVE ..........................................................................................13
REDUNDANCY TESTING ................................................................................14
FIRE SIGNAL ..................................................................................................15
ELECTRIC LOCK EL5 ...........................................................................................16
FIRST STARTUP ...............................................................................................17
TYPE 300 A ...................................................................................................18
NORMAL OPERATION OF 300 A .........................................................................18
ACTIVATION OF THE BREAK-OUT FUNCTION ............................................................19
POSSIBILITY OF ENLARGING THE PASSAGE OPENING....................................................19
TYPE 300 F AND 300 EF ......................................................................................20
INTENDED USE OF 300 F ...............................................................................20
INTENDED USE OF 300 EF .............................................................................20
FIRE DOOR OPERATION ................................................................................21
SYSTEM SETTINGS ............................................................................................22
LIGHT AND SOUND DIAGNOSTICS .............................................................................23
DURING OPERATION ...................................................................................23
DURING WARNING .....................................................................................23
DURING ERRORS .......................................................................................24
HANDLING DURING ERRORS............................................................................25
WARNINGS ............................................................................................26
ERRORS ...............................................................................................28
TRANSPORT AND STORAGE ...................................................................................29
MAINTENANCE ...............................................................................................30
UNINSTALLATION, REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
SERVICE INFORMATION .......................................................................................31
MARKING .....................................................................................................31
INTRODUCTION
Dear client,
we would like to thank you for your purchase. You will find that you can rely on our products.
The purpose of the detailed instructions is to better acquaint you with the automatic door system of
the product line 300 so that you may make better use of it. We recommend that this manual is kept
somewhere close to the door.
4I USER MANUAL
Important safety instructions. It is important for the safety of persons to follow these
instructions. Save these instructions.
NOTE: the additional code (W) is the code for the wooden alternative of the doors.
Automatic sliding doors Doorson product line 300 must be installed in accordance with the instructions
for installation. The automatic systems of the product line 300 serve for automatization of passages. This
allows unhindered passage from the exterior into the interior area and vice versa. In this way we achieve
selectivity, automatism, modernization, aesthetic appearance and a wide range of uses.
Easier passage with the help of the automatic system offers comfort, rationalization in heating of the
premises, and for disabled persons this is the only way that allows independent passage through the door.
The system works safely even in extreme conditions, increased frequency of opening and temperature and
climatic changes. The computer-supported technology provides diverse functionality and greater reliability.
The system’s modern design has all the advantages that enable people to improve their standard of living.
Implementation of the high technology allows for many various functions of opening and closing the door.
The locks prevent unwanted intrusion and the one-way passage ensures selectivity. Partial opening of the
door saves energy during low temperatures. The various uses of the sensors provide free passage, while
safety is ensured by sensors for presence and special and spot sensors. The program’s flexibility allows
adjustment of the desired speed and time of open doors.
With a high degree of innovation and knowledge we are constantly developing new products and our goal
this time was to develop energy-saving automatic sliding doors product line 300 which drastically reduce
electricity costs and thus classify buildings as environmentally friendly.
Energy-efficient sliding doors DOORSON product line 300 think advanced and act green. When our doors
are in a “CLOSED” or “OPEN” operating mode for more than 9 seconds, they exclude the supply of voltage
and remain on battery support with reduced power consumption of less than 0.5W. Only certain functions
for the reactivation of the doors are carried out.
After the completion of the tests, calculations have shown that our automatic sliding doors in idle state
(stand-by mode) consume less than 0.5W of electricity. (ZAG report - Slovenian National Building and Civil
Engineering Institute, where we also received the necessary approval and certificates)
Compared to the competition in the market, automatic doors product line 300 consume 70% less electricity
and reduce CO2 emissions by 70%.
Before first use, carefully read the entire instructions and pay attention to the listed safety
recommendations! The instructions include the entire product line 300.
5I USER MANUAL
DOORSON d.o.o.
Milenkova ulica 9
2000 Maribor
Slovenia, Europe
T: +386 (0)2 460 55 60
F: +386 (0)2 460 55 66
W: www.doorson.com
Doorson company
PRODUCT DESCRIPTION
Automatic sliding doors product line 300 consist of an intelligently regulated modern drive mechanism.
The door controller allows you to use a wide range of accessories (mode selectors, motion and presence
sensors, safety sensors, battery units, electric locks, anti-burglar switches, keyboards, remote controls,
magnetic card readers, connection to the fire safety system…), which ensure high operation safety and
integration with smart building systems.
Product line 300+
MANUFACTURER
CONTACT
PRODUCT PURPOSE
Automatic sliding doors product line 300 can be used as interior or exterior doors. The drive is advised to
be installed inside the building, otherwise a canopy is recommended. In the product line 300 the 300F and
300EF doors are fireproof doors. The 300 THALES r, 300 r, 300 T r, 300 P r, 300 SC r, 300 C r, 300 A and
300 EF are suitable for the installation on escape routes and emergency exits.
Automatic sliding doors product line 300 may only be used according to its specified intended use.
Doorson will not accept any liability for damage resulting from unauthorized modification of
product line 300 or inappropriate use. Furthermore, components/accessories that have not been approved
by Doorson are exempted from liability.
It is important for the safety of persons to follow these instructions:
do not allow children to play with automatic doors;
always escort children when walking through automatic doors;
frequently examine the door status (signs of wear, inadequate functioning and damage to
cables or moving parts). Do not allow door operation if repair or adjustment is necessary;
disconnect the power supply (230VAC and battery unit) during maintenance works inside
the drive;
change the door mode to STOP during the cleaning of the door leaves;
follow all instructions since incorrect installation can lead to severe injury;
properly ground the door leaf/leaves if Product line 300 is installed on a metal
construction;
door leaves with glass must be made of safety glass;
there should be no contact between glass and hard materials during operation if the leaves
are made from glass only.;
During the planning of automatic sliding doors product line 300, the manufacturer (the person installing
the system) and the commissioner/facility operator have to perform an individual risk assessment
together. All the data is included in the SAFETY ANALYSIS document.
6I USER MANUAL
DANGER SPOTS: Automatic doors might cause hazards like
crushing, shearing, hitting and drawing-in at the closing edges.
RESIDUAL RISK: Depending on the structural conditions, the
prevailing door version and the available safety equipment,
residual risks such as crushing and hitting (with a limited force)
cannot be excluded.
A – main closing edge
B– secondary closing edge
Danger spots
TECHNICAL DATA
7 I USER MANUAL
Technical data
Rated voltage
Movement speed of the sliding leaf/leaves
Rated power
IP protection class
Power source protection (F1)
Normal operating temperature
Permitted maximum relative humidity
The lifespan of the product
In-built glass for profiles PR 4
In-built glass for profiles PR 5
DOORSON aluminium profiles
230V 50/60Hz
max. 0.7m/s – depends on the weight of the leaves
300W
IP54
6,3A–slow
-20°C do 50°C
90%
15 years or at least 1,000,000 cycles
glued 4+4 or 5+5 ESG 8 or 10mm
insulated 3+3-9d-3+3, 6k-9d-6k, 5k-9d-5k or 5k-12d-5k
PR4 family – for a single safety glazing
PR5 family – for an isolation safety glazing
MAXIMUM DOOR DIMENSIONS AND WEIGHTS
Maximum dimensions and weights
The clear opening width extends from 800 to 3000 mm and the height is up to 3000 mm.
Prescribed maximum weight is 2 x 125 kg for a double leaf door, or 1 x 250 kg for a single leaf
door.
PRODUCT LINE 300
8 I USER MANUAL
Door types
TYPE
300 THALES
300
300 r
300 T r
300 P
300 P r
300 SC
300 SC r
standard door
standard door
standard door - redundant
telescopic door - redundant
prismatic door
prismatic door - redundant
semi curved door
semi curved door - redundant
300 C r curved door - redundant
300 F fire door without break-out system
DRIVE DESCRIPTION
standard
standard
standard redundant
mechanical redundant
300 EF fire door with break-out systemmechanical redundant
300 A door with break-out system
300 C curved door
300 T telescopic doorstandard
standard redundant
standard redundant
standard redundant
standard redundant
standard
standard
standard
standard
DRIVE
standard
standard
redundant
mechanical
redundant
BU3 slim
EL5
EC4
M
230V box
M r
BU3 slim
EL5
EC4 r
M
230V box
EL5
EC4 f
M
230V box
CONTENT
pulley
battery unit
electric lock
door controller
main motor
230V box
redundant motor
battery unit
electric lock
door controller
main motor
230V box
pulley
electric lock
door controller
main motor
230V box
actuators
mechanical redundant unit
PRODUCT LINE 300
9I USER MANUAL
Door types
Automatic sliding doors product line 300 are made according to the latest technologies and in compliance
with current technical regulations. Doors have to be installed according to the installation manual.
Note the next points that the doors will function properly and with the prescribed safety:
safety sensors have to be clean;
do not leave any obstructions or objects near automatic doors which could hinder the
functioning of the sensors within their operation area;
do not allow unauthorized entry into the drive system. Allow repairs and maintenance only
to professionally trained services;
use the system according to the user manual otherwise safety of people is at risk;
unauthorized interference with the system, its operation, removal of parts (safety sensors
for example) is not permitted;
the operator has to monitor the operating conditions and functioning of the system
occasionally and take care of system maintenance;
the power supply should not be manually switched off overnight (manually switch off
the power supply and batteries only if the door will not be used for several weeks);
do not allow power supply to be switched off for more than one week otherwise the
battery unit has to be replaced at door re-use.
SAFETY RECOMMENDATIONS
standard
standard redundant
mechanical redundant
DOOR OPERATION
10 I USER MANUAL
Ensure that mode selector COM20 is used on doors for escape routes and emergency exits
and is protected with an access code or a key, so the changes can only be made by authorized
personnel.
MODE SELECTION
Modes of operation
SYMBOL
CLOSED
OPEN
AUTOMATIC SUMMER
AUTOMATIC WINTER
EXIT SUMMER
EXIT WINTER
STOP
door closes and locks
door opens and remains open
door operation in automatic mode
door operation in automatic mode - reduced opening
door opens only with exit sensor
door opens only with exit sensor - reduced opening
door stops, can be moved manually
The operating mode of automatic sliding doors product line 300 are chosen with the mode selectors
COM20, COM21 or with additional devices via additional entries on the EC4 door controller.
MODE OPERATION
STOP
REDUNDANCY
TESTING
X
X
X
X
X
Ensure that mode selector COM20 is only activated when there are no other persons in the
room.
This manual suits for next models
12
Table of contents
Popular Door manuals by other brands
Lennox Hearth Products
Lennox Hearth Products MPB-35 installation instructions
Ives
Ives Offset Top Pivot 7245F installation instructions
KitchenAid
KitchenAid KBAU181V Installation instructions and use and care guide
Ives
Ives 670 Installation and maintenance instructions
Ives
Ives Mortise Bolt S48 installation instructions
American Standard
American Standard Acrylux 6000Y1.BE5 Specifications