Dometic PERFECTPOWER PP604 User manual

PP604

Modified sine wave inverter

Installation and Operating Manual. . . . . . . . 5

改良版正弦波逆变器

安装和操作说明 . . . . . . . . . . . . . . . . . . . . . 15

POWERFAULT

ENERGY & LIGHTING

PERFECTPOWER

PP604--IO-EN-ZH.book Seite 1 Donnerstag, 2. November 2017 11:41 11

PP604--IO-EN-ZH.book Seite 2 Donnerstag, 2. November 2017 11:41 11

PerfectPower

POWERFAULT

PP604

REMOTE

DC INPUT

FUSE

GROUND

OFF

REMO.

PP604

PP604--IO-EN-ZH.book Seite 3 Donnerstag, 2. November 2017 11:41 11

PerfectPower

NEG(-)

REVERSEPOLARITY

CHASSIS

25 cm

PP604--IO-EN-ZH.book Seite 4 Donnerstag, 2. November 2017 11:41 11

PerfectPower

Please read this instruction manual carefully before installation and first

use, and store it in a safe place. If you pass on the product to another

person, hand over this instruction manual along with it.

Contents

1 Explanation of symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

3 Device guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

4 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

5 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

6 Connecting the inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

7 Using the inverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

8 Replacing the fuse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

9 Cleaning and caring for the inverter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

10 Rectifying faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

11 Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

12 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

13 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

PP604--IO-EN-ZH.book Seite 5 Donnerstag, 2. November 2017 11:41 11

Explanation of symbols PerfectPower

1 Explanation of symbols

2 General safety instructions

The manufacturer accepts no liability for damage in the following cases:

•Faulty assembly or connection

•Damage to the product resulting from mechanical influences and excess voltage

•Alterations to the product without express permission from the manufacturer

•Use for purposes other than those described in the operating manual

2.1 General safety

!WARNING!

•Use the device only as intended.

•People (including children) whose physical, sensory or mental capac-

ities or whose lack of experience or knowledge prevent them from

using this product safely should not use it without the supervision or

instruction of a responsible person.

•Do not operate the device in a damp or wet environment.

•Maintenance and repair work may only be carried out by qualified per-

sonnel who are familiar with the risks involved and the relevant regula-

tions.

WARNING!

Safety instruction: Failure to observe this instruction can cause fatal or

serious injury.

NOTICE!

Failure to observe this instruction can cause material damage and impair

the function of the product.

NOTE

Supplementary information for operating the product.

PP604--IO-EN-ZH.book Seite 6 Donnerstag, 2. November 2017 11:41 11

PerfectPower General safety instructions

2.2 Safety when installing the device

!WARNING!

•Never connect more than one consumer device to the inverter. If you

connect more than one device, a short circuit may occur.

!CAUTION!

•Ensure the device is standing firmly.

The device must be set up and fastened in such a way that it cannot tip

over or fall down.

•Take the precautions necessary to ensure that children cannot inter-

fere with operation. Dangerous situations may occur which cannot be

recognised by children!

•Do not expose the device to a heat source (such as direct sunlight or

heating). Avoid additional heating of the device in this way.

Electrical cables

•If cables have to be fed through metal walls or other walls with sharp

edges, use ducts or wire bushings to prevent damage.

•Do not lay cables which are loose or bent next to electrically conduc-

tive material (metal).

•Do not pull on the cables.

•Do not lay the 230 V mains cable and the 24 V DC cable in the same

duct.

•Fasten the cables securely.

•Lay the cables so that they cannot be tripped over or damaged.

PP604--IO-EN-ZH.book Seite 7 Donnerstag, 2. November 2017 11:41 11

Device guides PerfectPower

2.3 Operating the appliance safely

!WARNING!

•Note the following basic safety information when using electrical

devices to protect against:

– Electric shock

–Firehazards

–Injury

•Do not operate the device near gas or flammable material; the surface

temperature can reach up to 60 °C.

•Operate the device only if you are certain that the housing and the

cables are undamaged.

•Make sure the air inlets and outlets of the device are not covered.

•Ensure good ventilation.

•Do not connect the 230 V output of the inverter (fig. 11, page 3) to

a different 230 V source.

•Even after the fuse triggers, parts of the inverter remain live.

•Always disconnect the power supply when working on the device.

3 Device guides

•PerfectPower PP604: inverter with terminals for a 24 V vehicle battery and

four holders

4 Intended use

The inverters are used to convert a direct current of 24 V into a 230 V AC supply of

50 Hz.

NOTICE!

This device is exclusively intended for vehicle use.

PP604--IO-EN-ZH.book Seite 8 Donnerstag, 2. November 2017 11:41 11

PerfectPower Technical description

5 Technical description

The PerfectPower inverter can be operated wherever there is a 24 Vgvehicle

socket. The device is additionally cooled with a load and temperature dependent

fan.

Never connect devices that have a higher power requirement.

The inverter is equipped with protection against thermal and electrical overloading,

as well as excess and insufficient voltage. The inverter switches off:

•If its internal temperature is too high

•If the load exceed the values stated above

•If the input voltage is too high or too low

The inverter can be switched on and off using the switch directly on the device or

using an external switch.

INOTE

Note when connecting devices with an electrical drive (such as power

drills and refrigerators), that they often need more power than is stated

on the type plate.

PP604--IO-EN-ZH.book Seite 9 Donnerstag, 2. November 2017 11:41 11

Connecting the inverter PerfectPower

6 Connecting the inverter

6.1 Fastening the inverter

You can fasten the inverter using the four holders supplied.

When selecting the installation location, observe the following instructions:

•The inverter can be mounted horizontally or vertically.

•The inverter must be installed in a place that is protected from moisture.

•The inverter may not be installed in the presence of flammable materials.

•The inverter may not be installed in a dusty environment.

•The place of installation must be well-ventilated. A ventilation system must be

present for installations in small, enclosed spaces. The clearance around the

inverter must be at least 25 cm (fig. 4, page 4).

•The air intake on the underside or the air outlet on the back of the inverter must

remain clear.

•For ambient temperatures higher than 40 °C (such as in engine or heating com-

partments, or direct sunlight), the heat from the inverter under load can lead to

the automatic shut-off of the inverter.

•The installation surface must be level and sufficiently sturdy.

Fasten the inverter as follows (fig. 5, page 4):

➤Clip two holders on the lower left bar and two on the right.

You can move the holders as required.

➤Fasten the inverter by screwing one screw through each hole in the holders.

NOTICE!

The cable between the battery and the inverter may not exceed a

maximum length of 2 m.

NOTICE!

Before drilling any holes, ensure that no electrical cables or other parts

of the vehicle can be damaged by drilling, sawing and filing.

PP604--IO-EN-ZH.book Seite 10 Donnerstag, 2. November 2017 11:41 11

Table of contents

Other Dometic Inverter manuals

Dometic

Dometic TEC29 User manual

Dometic

Dometic BUTTNER MT ICC Series User manual

Dometic

Dometic Go Power GP-ISW-200 User manual

Dometic

Dometic PERFECTPOWER PP152 User manual

Dometic

Dometic DSP612 User manual

Dometic

Dometic Go Power! GP-1750HD User manual

Dometic

Dometic TEC29EV User manual

Dometic

Dometic TEC60 User manual

Dometic

Dometic TEC 40D Operation User manual

Dometic

Dometic BUTTNER BLACK LINE MT140MC User manual

Dometic

Dometic BUTTNER MT 600 SI-N User manual

Dometic

Dometic BUTTNER MT SM 65 TL User manual

Dometic

Dometic SINEPOWER DSP1312T User manual

Dometic

Dometic TEC29 User manual

Dometic

Dometic TEC29EV User manual

Dometic

Dometic DSP212 User manual

Dometic

Dometic TEC Series User manual

Dometic

Dometic CK36H401RI Harrier Inverter User manual

Dometic

Dometic DSP1212C User manual

Dometic

Dometic T2500 H/HG-LP Manual

Dometic

Dometic PocketPower SI 102 User manual

Dometic

Dometic SINEPOWER MSI 412 User manual

Dometic

Dometic Go Power! PORTABLE SOLAR KITS GP-PSK-200 User manual

Dometic

Dometic TEC60 User manual

Popular Inverter manuals by other brands

Fourgroup

Fourgroup Easy use and Programming Handbook

Velleman

Velleman PI300M user manual

Sungrow

Sungrow SG350HX-US user manual

WilTec

WilTec 61897 Operation manual

SMA

SMA SUNNY BOY STORAGE 2.5 Quick reference guide

Simplicity

Simplicity LANDLORD 316 product manual

Santak

Santak SMAX 3000 user manual

ATON

ATON RA.Store-3 user manual

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ operating instructions

Tektronix

Tektronix CFG250 Operator's manual

Champion

Champion 200989 Operator's manual

Vanner

Vanner 20-500 Series owner's manual

GE GEP user manual

Astrel Group

Astrel Group Power Reducer Installation and instruction manual

MULTIQUIP

MULTIQUIP GDP-5H Operation and parts manual

GoWISE

GoWISE PS1007 user manual

Promate

Promate PM13500D ES Operator's manual

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM user manual