Full HD Extreme WDR Dome Network Camera NDR255P Quick Guide
This guide is for quick installing and connecting the Full HD Multi-Streams Ultra-WDR Mini Dome IP Camera.
For more details, please refer to the User’s Manual of the camera in the supplied CD.
Camera’s Connectors
- For network and PoE connections
2 Power (DC 12V / AC 24V)
1 DC 12V AC 24V 1
Power connection 2 DC 12V Reserved AC 24V GND
3 DC 12V GND AC 24V 2
3 microSD Card Slot
- Insert the microSD card into the card slot to store videos and
snapshots. Do not remove the microSD card when the camera is
powered on.
- For analog video output
5 Alarm & Audio I/O
1 Alarm In –
Alarm connection
2 Alarm In +
3 Alarm Out –
4 Alarm Out +
5 Audio Out L Audio Out
6 Audio Out R
7 GND
8 Audio In
6 Default Button - Press the button for at least 20 seconds with one finger to restore
the system to factory default settings.
(*) Optional
NOTE: It is not recommended to record with the microSD card for 24/7 continuously, as it may not be able to
support long term continuous data read/write. Please contact the manufacturer of the microSD card for
information regarding the reliability and the life expectancy.
Camera Cabling
Please follow the instructions below for cable connections.
Power Connection
Please use a DC 12V / AC 24V power adaptor and plug it to the camera and the power outlet. Alternatively, users can
use an Ethernet cable and connect it to the RJ-45 connector of the camera and a Power Sourcing Equipment (PSE)
switch.
NOTE: If PoE is used, make sure PSE is in used in the network.
Ethernet Cable Connection
Connect one end of the Ethernet cable to the RJ-45 connector of the camera, and plug the other end of the cable to
the network switch or PC.
NOTE: In some cases, Ethernet crossover cable might be needed when connecting the camera directly to the
PC.
NOTE: Check the status of the link indicator and the activity indicator LEDs. If the LEDs are unlit, please
check the LAN connection.
Green Link Light indicates good network connection.
Orange Activity Light flashes for network activity indication.
Function Cables
- For network and PoE connections
2 Power (DC 12V / AC 24V)
1 DC 12V – / AC 24V 1
Power connection 2 GND
3 DC 12V + / AC 24V 2
3 Alarm I/O
(4-Pin Terminal Block)
1 Alarm In – Blue
2 Alarm In + Green
3 Alarm Out – Yellow
4 Alarm Out + Orange
4 Audio I/O Green
Audio Out Two-way audio transmission
Pink
Audio In
- For analog video output
- Default Button - Please refer to Default Button in the table under Camera’s
Connectors (Indoor Only).
Before Login to the Camera
A client program will be automatically installed to the PC when connecting to the camera. Before logging in to the
camera, please ensure downloading the ActiveX control is allowed by either changing the ActiveX controls and
plug-ins or setting Internet’s security level to default. For further details, please refer to the User’s Manual in the
supplied CD.
ActiveX Controls and Plug
Step 2: Select <Tools> from the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab
<Internet>, and click on <Custom level> to
change ActiveX settings.
Step 4: Set “ActiveX controls and plug-ins” items to
Step 2: Select <Tools> from the main menu of the
browser. Then click on <Internet Options>.
Step 3: Click on the <Security> tab
<Internet>.
Step 4: Down the page, click <Default Level> and click
on <OK> to confirm the setting. Close the
browser window, and open a new one later for
accessing the IP camera.
