Display Mount Pro LCD482T-STAND User manual

English

Installation Instruction

UNPACKING INSTRUCTIONS

! Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

! Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

! Carefully read all instructions before attempting installation.

IMPORTANT SAFETY INFORMATION

! Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

! Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

Supplied Par ts List

CAUTION!

WARNING

!This monitor desktop mount must be securely

installed to the horizontal desk. If the mount is

not properly installed it may fall, resulting in

possible injury and/or damage.

Tools Required Phillips Screwdriver

(1) 48mm Pole-a (1) Monitor Arm-c

(3)M6x29 Bolt-j (1)Allen Key-k

(1) Weighted Base-b

(2)Spare Cover-p

(1) Plastic Cover-d

(1)Support Plate-f(1)M10 Bolt-e

(1)Wrench-l

(12)M4 Space-o

(12)M4x12

Thumb Bolt-m (12)M4x30 Bolt-n

(1)M10 Washer-g (1)Spring Washer-h

(2)M8x10 Bolt-i

Step 1 Mounting the base according to your requirement

Option 2 Option 3

Option 1

The stand can be used with the weighted

metal base or there is a desk attachment

provided (as drawings on the bottom)

allowing you to mount the stand on a desk.

This is very simple to install and just

requires a hole drilling (10mm diameter) in

your desk and clamping with the bolt and

large washer.

Step 3 Mount the Monitor to VESA Plate

Install monitor arm to the pole,

please make sure the wire clip

in the downside. Fasten the

M8x10 bolt(i) by screw driver.

Step 2 Install Monitor Arm to the Pole

For Curved Back Monitor

Wire Clip

For Flat Back Monitor

Step 4

Step 6

Do the Necessary Adjustment

Manage the Wires

Use the Allen Key(k) to adjust the

turning tension. Use the Wrench(l)

to tighten the nut if the tilt angle can

not be fixed.

Turn the bolt counterclockwise to

lower the center monitor, turn the

bolt clockwise to raise the center

monitor.

Level Adjustment

Thank you for choosing our products!

Table of contents

Other Display Mount Pro Rack & Stand manuals

Display Mount Pro

Display Mount Pro ATV-04 User manual

Display Mount Pro

Display Mount Pro GS-002-WALL User manual

Display Mount Pro

Display Mount Pro FS411 User manual

Display Mount Pro

Display Mount Pro MDM 003T User manual

Display Mount Pro

Display Mount Pro ND6455 User manual

Display Mount Pro

Display Mount Pro CURVE-D-STAND User manual

Display Mount Pro

Display Mount Pro LCD351D-STAND User manual

Display Mount Pro

Display Mount Pro GS352D User manual

Display Mount Pro

Display Mount Pro LCD3502-T User manual

Display Mount Pro

Display Mount Pro LCD512-S User manual

Display Mount Pro

Display Mount Pro SSW004 User manual

Display Mount Pro

Display Mount Pro GS-001-WALL User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 