Dish Network 6.3 User manual
Remote Control
User's Guide
Remote Control
User's Guide
TM
2
UHF
PRO
2
UHF
PRO
then
C-3
Quick Setup
1
UHF
PRO
RECORD
Turn your receiver and
TV on, and press SYSTEM
INFO on the front
of the receiver.
Confirm that you
see the System
Information screen.
Press RECORD on
your remote. The remote
address will probably
change on the screen.
Confirm that your remote operates your
receiver by pressing remote buttons. If
your remote has a blue number 2 key, you
may need to go to your remote TV2 location to
confirm your remote operates your receiver.
If this is not working, go back to step 5.
Making the Remote Work
With Your Receiver
4
3
2
1
5
6
4
REMOTE
ANTENNA
If you installed a UHF
key, make sure the
UHF antenna is
installed on the back
of the
receiver.
Green
(not black)
UHF Pro Symbol
1
UHF
PRO
UHF
UHF
PRO
1
2
UHF
PRO
If you installed one of these keys,
continue with step 2 on this page. If you installed this
key, go to page 11
inside this guide.
C-4
Quick Setup
TV
Turn your
TV on.
Press & hold the
TV Mode button
until all Mode
buttons light up.
Press
POWER.
Press the UP
ARROW
repeatedly (about 1
press per second)
until your TV
turns off.
Press
POUND.
The TV Mode button
will flash three times.
Press the POWER
button to turn the TV on
and try other buttons
to make sure the code
works. If you want to try
another code, start over
from step 1.
Program the Remote to
Control Your TV
12
34
5 6
#
C-5
Quick Setup
Programming the
Recover Button for
TV2 Operation
For TV2 Remote Controls on
DISH Player-DVR 522, 625, 942,
ViP222 and ViP622 DVR Receivers
Press
STAR.
#
Press
POUND.
1 2
TV
Press & hold the
TV Mode button
until all Mode
buttons light up. Enter the channel
number you tune
your TV to when you
watch satellite
programming.
4
3
2
Use the RECOVER button as described in
If You Lose Your Picture on the next page (C-6).
2
UHF
PRO
Programming your RECOVER button allows
you to easily regain satellite programming
if you accidentally change TV channels or inputs.
1 2 3
4 5 6
7 8 9
0
Quick Setup/Operation
C-6
SELECT
Press and hold RECOVER until all
mode buttons light up.
If you see the System Information
screen, proceed to step 4.
Otherwise, continue to step 3.
Press RECOVER again & wait until
the mode lights stop flashing. If you
see the System Information screen,
go to step 4. If not, repeat this step
until you do.
SAT
TV
VCR
AUX
Press SELECT to resume watching TV.
Use the RECOVER button to get back to watching
satellite programming if you accidentally change
channels or inputs on your TV.
Placing Your Remote
in Limited Mode
If You Lose Your Picture
(How to Use the RECOVER Button)
#
Press
POUND.
TV
Press & hold the
TV Mode button
until all Mode
buttons light up.
23
1
1
2
3
4
Press the
PAGE UP
button.
PAGE
To take the remote out of Limited Mode, use the PAGE DOWN
button instead of the PAGE UP button in step 2.
(Your screen may be different)
Limited Mode locks out all the TV mode operations except for
TV power, Mute, and Volume. This prevents you from accidentally
tuning away from satellite programming.
C-7
Operation
2
UHF
PRO
2
UHF
PRO
Remote Operation
SAT Mode
SAT
Remote key may
be different than
what is shown here
Receiver Power
& TV Power
Receiver Menu
Program Guide
Arrows/Select
Buttons
View Satellite
Programming
Digital Video
Recorder (DVR)
Buttons
Picture-In-Picture
(PIP) Buttons
Number Buttons
Top button turns
the receiver on/off,
bottom button
turns the TV on/off
Programming required
(see C-4)
Channel up/down,
navigate through
menus/guides and
select a desired
option
Exit out of any menu/
guide and go back to
viewing live TV
DISH
Explore interactive
TV features
Browse
See what is on other
channels while
watching TV
Enter a channel
number, or select
menu items
Search
Search for a program
Watch two separate
programs at once
Recover
Recovers satellite
programming if your
TV input or channel
has changed
Format
Format the picture
to the desired width
to match the program
you are viewing
Display current and
future satellite
program listings
Page Buttons
Page up/down in
menus
Control TV volume
Programming required (see C-4)
Access receiver
features and settings
Themes
Search for programs
using Themes
Recall
Go back to last
channel viewed
Info
Display program info
Pause live TV and
play or record
programming
Volume & Mute Buttons
To use the features described in this section, make
sure you are in SAT mode by pressing the SAT Mode button.
Note: Some features may not be available depending on your receiver model.
Press this
button for
SAT Mode
2
UHF
PRO
2
UHF
PRO
Remote key may
be different than
what is shown here
C-8
Operation
Remote Operation
TV Mode
TV Power
TV Menu
Up/Down Arrow
Buttons
Picture-In-Picture
(PIP) Buttons
Number Buttons
Top & bottom
button
Turn TV on/off
Channel up/down
on TV
Enter a desired
channel number
on TV
Display PIP features
on some TVs with
PIP capabilities
Volume
Control TV
volume
Access menu
features available on
some TVs
TV/Video
Switch between
TV inputs
Mute
Turn TV volume
on or off
Recall
Go back to last
TV channel viewed
To use the features described in this section, make
sure you are in TV mode by pressing the TV Mode button.
Remote programming is required. See C-4 for instructions.
TVTV
Note: Remote operation is different on DISH Network TVs.
See your DISH Network TV User's Guide for proper operation.
Press this
button for
TV Mode
Remote key may
be different than
what is shown here
2
UHF
PRO
2
UHF
PRO
Remote key may
be different than
what is shown here
C-9
Operation
Remote Operation
VCR Mode
VCR
VCR/DVD Power
& TV Power
TV/Video Up/Down Arrow
Buttons
FWD
Number Buttons
Top button turns
VCR/DVD player
on/off, bottom
button turns the
TV on/off
Channel up/down
on VCR
Forward a videotape
or DVD
Play
Play a videotape or
DVD
Pause
Pause a videotape or
DVD
Enter a desired
channel number
on VCR
Switch VCR between
its TV & VCR mode
Back
Rewind a videotape
or reverse a DVD
Stop
Stop playing
or recording a
videotape, stop
playing a DVD
Record
Record on a
videotape
To use the features described in this section, make
sure you are in VCR mode by pressing the VCR Mode button.
You can use this mode to operate your DVD player instead of a VCR.
Remote programming is required. See page 2 for instructions.
Press this
button for
VCR Mode
Table of contents
Other Dish Network Remote Control manuals
Dish Network
Dish Network 40.0 User manual
Dish Network
Dish Network 20.1 User manual
Dish Network
Dish Network 52.0 User manual
Dish Network
Dish Network 167820 User manual
Dish Network
Dish Network Platinum PVR Remote Control User manual
Dish Network
Dish Network SoloDVR ViP 612 Use and maintenance manual
Dish Network
Dish Network Platinum Plus 121150 User manual
Dish Network
Dish Network 40.0 User manual
Dish Network
Dish Network Platinum 121716 User manual
Dish Network
Dish Network DISHPlayer 500 7100/200 User manual
Dish Network
Dish Network 3.1 User manual
Dish Network
Dish Network 135331 User manual
Dish Network
Dish Network digital remote control User manual
Dish Network
Dish Network 301 IR 123271 User manual
Dish Network
Dish Network 54.0 User manual
Dish Network
Dish Network Duo ViP 222 User manual
Dish Network
Dish Network 11 Specification sheet
Dish Network
Dish Network Hopper with Sling User manual
Dish Network
Dish Network 40.0 User manual
Dish Network
Dish Network 54.0 User manual
