Directed Electronics Valet 561T User manual

MMooddeell556611TT

OOwwnneerr''ssGGuuiiddee

LLiimmiitteeddLLiiffeettiimmee

CCoonnssuummeerrWWaarrrraannttyy

For a period of one calendar year from the date of purchase of this auto-security

device, Directed Electronics promises to the ORIGINAL PURCHASER to repair or replace

(with a comparable reconditioned model), free of cost, any electronic control module

which proves to be defective in workmanship or material under normal use, SO LONG

AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO

INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY

INSTALLED. If warranty service is necessary you must have a clear copy of your sales

receipt containing all of the information shown on the following page.

After the first calendar year, from the date of purchase of this auto-security device,

Directed Electronics, promises to the ORIGINAL PURCHASER to repair or replace (with

a comparable reconditioned model) any electronic control module which proves to be

defective in workmanship or material under normal use FFOORRAACCHHAARRGGEEOOFF$$4455..0000,,SO

LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO

INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY

INSTALLED. If warranty service is necessary you must have a clear copy of your sales

receipt containing all of the information shown on the following page.

This warranty contains the entire agreement relating to warranty and supersedes all

previous and contemporaneous representations or understandings, whether written or

oral. IN ANY EVENT, DIRECTED ELECTRONICS IS NOT LIABLE FOR THE THEFT OF THE

VEHICLE AND/OR ITS CONTENTS.

This warranty is void if the product has been damaged by accident, unreasonable use,

neglect, improper service or other causes not arising out of defects in materials or

construction. This warranty is nontransferable and does not apply to any unit that

has been modified or used in a manner contrary to its intended purpose and does not

cover batteries. The unit in question must be returned to the manufacturer, postage

prepaid. This warranty does not cover labor costs for the removal, diagnosis, trou-

bleshooting or reinstallation of the unit. For service on an out-of-warranty product a

flat rate fee by model is charged. Contact your authorized dealer to obtain the ser-

vice charge for your unit.

These systems are a deterrent against possible theft. Directed Electronics is not offer-

ing a guarantee or insuring against the theft of the automobile or its contents and

disclaims any liability for the theft of the vehicle and/or its contents. Directed

Electronics does not authorize any person to create for it any other obligation or lia-

bility in connection with this security system.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ANY AND ALL WARRANTIES ARE EXCLUD-

ED BY THE MANUFACTURER AND EACH ENTITY PARTICIPATING IN THE STREAM OF COM-

MERCE THEREWITH. THIS EXCLUSION INCLUDES BUT IS NOT LIMITED TO THE EXCLU-

SION OF ANY AND ALL WARRANTY OF MERCHANTABILITY AND/OR ANY AND ALL WAR-

RANTY OF FITNESS FOR A PARTICULAR PURPOSE AND/OR ANY AND ALL WARRANTY OF

NON-INFRINGEMENT OF PATENTS, IN THE UNITED STATES OF AMERICA AND/OR

ABROAD. NEITHER THE MANUFACTURER OR ANY ENTITIES CONNECTED THEREWITH

SHALL BE RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT

NOT LIMITED TO ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, TOWING,

REPAIR, REPLACEMENT, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL

LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE

ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR

THE CONTROL MODULE AS DESCRIBED ABOVE. Some states do not allow limitations on

how long an implied warranty will last or the exclusion or limitation of incidental or

consequential damages. This warranty gives you specific legal rights, and you may

also have other rights which vary from state to state.

IIMMPPOORRTTAANNTTNNOOTTEE::

This product warranty is automatically void if its date code or serial number is

defaced, missing, or altered. This warranty will not be valid unless you have com-

pleted the warranty card and mailed it to Directed Electronics within 10 days after

purchase to the address listed on the warranty registration card.

Make sure you have all of the following information from your dealer:

A clear copy of the sales receipt, showing the following:

■Date of purchase

■Your full name and address

■Authorized dealer's company name and address

■Type of system installed

■Year, make, model and color of the automobile

■Automobile license number

■Vehicle identification number

■All security options installed on automobile

■Installation receipts

LLiimmiitteeddLLiiffeettiimmeeCCoonnssuummeerrWWaarrrraannttyy..................................................................ii

Your Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

WWhhaattiissIInncclluuddeedd..................................................................................

..........22

IImmppoorrttaannttIInnffoorrmmaattiioonn...................................................................

.................22

UUssiinnggYYoouurrSSyysstteemm................................................................

..........................33

Warning! Safety First . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Remote Start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Valet Take-Over . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Defogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using Remote Start with Factory Remote Systems. . . . . . . . . . . . . . . . . . . . 8

PPrrooggrraammmmiinnggOOppttiioonnss...................................................

...................................99

GGlloossssaarryyooffTTeerrmmss..............................................

..........................................1100

QQuuiicckkRReeffeerreenncceeGGuuiiddee::.................................

.................................................1111

TTaabblleeooffCCoonntteennttss

WWhhaattiissIInncclluuddeedd

■The control module

■A push-button programming switch

■Your warranty card

■A shut-down toggle switch

IImmppoorrttaannttIInnffoorrmmaattiioonn

Congratulations on the purchase of your remote start system. This

system has been designed to provide years of trouble-free opera-

tion. By carefully reading this owner's guide prior to using your

system, you will maximize the use of this system and its features.

Additional or replacement copies of this guide can be printed by

accessing the Directed Electronics internet website at www.direct-

ed.com.

Your warranty card must be completely filled out and returned

within 10 days of purchase. Your product warranty will not be hon-

ored if your warranty card is not returned. Make sure that you

receive the warranty card from your dealer.

YYoouurrWWaarrrraannttyy

This product is designed for fuel injected, automatic transmission

vehicles only. Use of this product in a standard transmission vehi-

cle is dangerous and contrary the product's intended use.

UUssiinnggYYoouurrSSyysstteemm

The following safety warnings must be observed at all times:

■Due to the complexity of this system, installation of this

product must only be performed by an authorized Directed

Electronics dealer.

■When properly installed, this system can start the vehicle via

a command signal from the remote control transmitter.

Therefore, never operate the system in an enclosed area or

partially enclosed area without ventilation (such as a garage).

When parking in an enclosed or partially enclosed area or

when having the vehicle serviced, the remote start system

must be disabled using the installed toggle switch. It is the

user's sole responsibility to properly handle and keep out of

reach from children all remote control transmitters to assure

that the system does not unintentionally remote start the

vehicle. TTHHEEUUSSEERRMMUUSSTTIINNSSTTAALLLLAACCAARRBBOONNMMOONNOOXXIIDDEEDDEETTEECC--

WWaarrnniinngg!!SSaaffeettyyFFiirrsstt

CCaauuttiioonn

TTOORRIINNOORRAABBOOUUTTTTHHEELLIIVVIINNGGAARREEAAAADDJJAACCEENNTTTTOOTTHHEEVVEEHHII--

CCLLEE..AALLLLDDOOOORRSSLLEEAADDIINNGGFFRROOMMAADDJJAACCEENNTTLLIIVVIINNGGAARREEA

ASSTTOO

TTHHEEEENNCCLLOOSSEEDDOORRPPAARRTTIIAALLLLYYEENNCCLLOOSSEEDDVVEEHHIICCLLEESSTTOORRAAGGEE

AARREEAAMMUUSSTTAATTAALLLLTTIIMMEESSRREEMMAAIINNCCLLOOSSEEDD..These precautions

are the sole responsibility of the user.

■Use of this product in a manner contrary to its intended mode

of operation may result in property damage, personal injury,

or death. (1) Never remotely start the vehicle with the vehi-

cle in gear, and (2) Never remotely start the vehicle with the

keys in the ignition. The user must also have the neutral safe-

ty feature of the vehicle periodically checked, wherein the

vehicle must not remotely start while the car is in gear. This

testing should be performed by an authorized Directed

Electronics dealer in accordance with the Safety Check out-

lined in the product installation guide. If the vehicle starts in

gear, cease remote start operation immediately and consult

with the authorized Directed Electronics dealer to fix the

problem.

■After the remote start module has been installed, contact your

authorized dealer to have him or her test the remote start

module by performing the Safety Check outlined in the prod-

uct installation guide. If the vehicle starts when performing

the Neutral Safety Shutdown Circuit test, the remote start unit

has not been properly installed. The remote start module must

be removed or the installer must properly reinstall the remote

start system so that the vehicle does not start in gear. All

installations must be performed by an authorized Directed

Electronics dealer. OOPPEERRAATTIIOONNOOFFTTHHEERREEMMOOTTEESSTTAARRTTMMOODDUULLEE

IIFFTTHHEEVVEEHHIICCLLEESSTTAARRTTSSIINNGGEEAARRIISSCCOONNTTRRAARRYYTTOOIITTSSIINNTTEENNDD--

EEDDMMO

ODDEEOOFFOOPPEERRAATTIIOONN..OOPPEERRAATTIINNGGTTHHEERREEMMOOTTEESSTTAARRTTSSYYSS--

TTEEMMUUNNDDEERRTTHHEESSEECCOONNDDIITTIIOONNSSMMAAYYRREESSUULLTTIINNPPRROOPPEERRTTYY

DDAAMMAAGGEEOORRPPEERRSSOONNAALLIINNJJUURRYY..YYOOUUMMUUSSTTIIMMMMEEDDIIAATTEELLYY

CCEEAASSEETTHHEEUUSSEEOOFFTTHHEEUUNNIITTAANNDDSSEEEEKKTTHHEEAASSSSIISSTTAANNCCEEOOFFAAN

AAUUTTHHOORRIIZZEEDDDDIIRREECCTTEEDDEELLEECCTTRROONNIICCSSDDEEAALLEERRTTOORREEPPAAIIRROORR

DDIISSCCOONNNNEECCTTTTHHEEIINNSSTTAALLLLEEDDRREEMMOOTTEESSTTAARRTTMMOODDUULLEE..DDIIR

REECCTT--

EEDDEELLEECCTTRROONNIICCSSWWIILLLLNNOOTTBBEEHHEELLDDRREESSPPOONNSSIIBBLLEEOORRPPAAYYFFOORR

IINNSSTTAALLLLAATTIIOONNOORRRREEIINNSSTTAALLLLAATTIIOONNCCOOSSTTSS..

This system allows you to remotely start and run your vehicle for

a programmable period of time. This makes it possible to warm up

the engine, as well as adjust the interior temperature of the vehi-

cle with the climate control system. If interior heating or cooling

is desired, the climate controls must be preset, and the fan blower

must be set to the desired level prior to remote starting the vehicle.

This remote start system can be activated by an auxiliary channel

of your keyless entry or security system.

Your system is operated using channel______________________.

IIMMPPOORRTTAANNTT!!(1) Never remotely start the vehicle with the vehicle in

gear, and (2) Never remotely start the vehicle with the key in the ignition.

RReemmootteeSSttaarrtt

TToorreemmootteessttaarrtttthheevveehhiiccllee::

1. Press the auxiliary channel on the transmitter twice within 3

seconds.

2. The parking lights will flash to confirm remote start operation.

3. Once the vehicle has started, it will run for the pre-program-

med period of time (12, 24, or 60 minutes) or until a shut-

down input is triggered. This can be set to minute increments

by your installer.

WWhheennyyoouuaarreerreeaaddyyttooddrriivveetthheevveehhiiccllee::

1. Insert the ignition key and turn it to the ON

(not the START) position.

2. Press the brake pedal.

NNOOTTEE::If the brake pedal is pressed before the key is in

the ON position, the engine will shut down.

While the vehicle is running during remote start operation, the sys-

tem will monitor the vehicle and will automatically shut down the

engine if the system receives any of the following shut-down inputs:

■The brake pedal is pressed.

■The hood is opened.

■The shutdown toggle switch is put into the OFF position.

■The pre-programmed run time has elapsed.

■The auxiliary channel is pressed twice in 3 seconds.

TToosshhuuttddoowwnntthheerreemmootteessttaarrttaannddttuurrnnoofffftthheeeennggiinnee::

■Step on the brake pedal, or

■Press your auxiliary channel twice in 3 seconds.

Timer Mode automatically starts the engine and runs it for a pre-

programmed time period, every three hours for a total of six oper-

ation cycles. This feature helps to ensure that your engine will

start in the morning after a night of extremely cold temperatures.

IIMMPPOORRTTAANNTT!!This feature must only be used in open areas, never in an

enclosed area such as a garage.

TTooeenntteerrTTiimmeerrMMooddee::

1. Turn the ignition on.

2. Press the auxiliary channel button controlling remote start

twice within 3 seconds.

3. Turn the ignition off while holding the auxiliary channel

button.

The parking lights will flash four times and the engine will then

start to confirm that Timer Mode has been entered.

The engine may be allowed to run for its preset time or can be shut

down by pressing the auxiliary channel again. Either way, it will

restart every three hours for a total of six cycles. If the unit

receives a shutdown input while operating in the timer mode the

engine will stop, but will restart, on schedule, again in three hours.

TTooeexxiittTTiimmeerrMMooddee::

Timer Mode can be exited by turning the ignition on with the key

any time the engine is not running. The parking lights will flash

four times to confirm that Timer Mode has been exited.

TTiimmeerrMMooddee

Other manuals for Valet 561T

Table of contents

Other Directed Electronics Remote Starter manuals

Directed Electronics

Directed Electronics CLIFFORD 1.3X User manual

Directed Electronics

Directed Electronics AS-1775 User manual

Directed Electronics

Directed Electronics 210HV User manual

Directed Electronics

Directed Electronics 410 User manual

Directed Electronics

Directed Electronics ProStart CT-5472TW User manual

Directed Electronics

Directed Electronics 560T User manual

Directed Electronics

Directed Electronics 4103 Series User manual

Directed Electronics

Directed Electronics PS-4661TWE-FM User manual

Directed Electronics

Directed Electronics ONE-WAY FM AUTOMATIC/MANUAL TRANSMISSION User manual

Directed Electronics

Directed Electronics Clifford G4203X User manual

Directed Electronics

Directed Electronics AM6 User manual

Directed Electronics

Directed Electronics Hornet 564T User manual

Directed Electronics

Directed Electronics Viper User manual

Directed Electronics

Directed Electronics SMARTSTART VSM200 User manual

Directed Electronics

Directed Electronics AutoCommand 28623TN Quick start guide

Directed Electronics

Directed Electronics Python G4203P User manual

Directed Electronics

Directed Electronics Python 1401 User manual

Directed Electronics

Directed Electronics AS-2371TW-FM User manual

Directed Electronics

Directed Electronics Valet 561R User manual

Directed Electronics

Directed Electronics 7111A User manual

Directed Electronics

Directed Electronics BOA 165B Quick start guide

Directed Electronics

Directed Electronics CT-3271 User manual

Directed Electronics

Directed Electronics AutoCommand 28624TN Quick start guide

Directed Electronics

Directed Electronics 5301 User manual

Popular Remote Starter manuals by other brands

AstroStart

AstroStart 803U user manual

Durite

Durite 0-649-20 Leaflet

EINHELL

EINHELL BT-PS 1000 Directions for use

Linear

Linear ACCESS AK-21 Installation and programming instructions

Soundstream

Soundstream TARANTULA RS.2 installation guide

Jaycar Electronics

Jaycar Electronics MB3752 instruction manual

Ultra Start

Ultra Start 72 Series owner's manual

ADS

ADS FLASHLOGIC FLRSVW1 Product guide

Selecta

Selecta JS012 instruction manual

Black Widow Security

Black Widow Security BW RAS 400 installation manual

Vector

Vector Power City DK080706 Owner's manual & warranty

Code Alarm

Code Alarm CA-535 owner's manual

Ozito

Ozito OJS-800 instruction manual

Profi-Partner

Profi-Partner 46387 instruction manual

EZ STARTER

EZ STARTER EZ-45 user guide

Viper

Viper 4204 owner's guide

Essex Electronics

Essex Electronics KE-1701 user guide

EINHELL

EINHELL EGS 3600 Directions for use