Dinstar UC100 User manual

Quick Installation Guide

1. Product Appearance of UC100

（1）Front View

On the front panel are seven indicators and the SIM card slot which supports hot swap.

（2）Back View

On the rear panel are the power port, WAN port, LAN port, FXS port, FXO port, reset button and external antenna.

Please use a network cable to connect the UC100 with a PC for convenient management.

Note: If the network is working under the route mode,WAN IP address is different from LAN IP address. But when

it is under the bridge mode, WAN IP address is the same as LAN IP address.

2.Configurations via Telephone

User could conduct some basic configurations on the UC100 by dialing the following keys on the telephone.

3. Configurations on Web Interface

（1）How to Log on Web Interface

Insert a network cable into LAN port, open a web browser on PC and enter the default IP ‘192.168.11.1’. Both the

default username and password are admin.

（2）How to Modify Network Configuration

Click Network Setting, and configure network parameters and WiFi parameters.

Note: Default network model is Route. User could choose to switch to Bridge.

（3）Configuration of SIP Trunk

Click Trunk SIP, and then click the New button to create a new trunk. Configure IP address and port of the peer

device. Choose whether to enable register or not. Click Save at the last.

（4）Configuration of FXS/FXO Port

Take FXS Port for Example

Click Extension FXS, and then click . Enter correct extension number and choose whether to enable register or

not. Click Save at the last.

Note: Auto call can only be enabled for incoming calls of FXO port and GSM port.

（5）Routing Configuration

Click Call ControlRoute, and then click the New button to create a new route. Choose a source and destination for

calls and click the Save button.

User needs to click Unsaved Changes at the upper right of the web interface after completing the above

configuration, and then click Save & Apply.

Note: the changes will not take effect until the UC100 is restarted.

4. Description of Indicators

5. FAQ

If the web interface you are trying to access is unavailable:

a. Check whether the network cable is correctly connected.

b. Check whether WAN IP is obtained via DHCP and LAN IP is 192.168.11.1 under the default network model ‘route'.

c. Check whether the IP address of PC and the IP address of peer device are at the same network segment.

d. Check whether the IP address of UC100 has been used by other device.

Other manuals for UC100

Table of contents

Other Dinstar Gateway manuals

Dinstar

Dinstar UC100-1V1S1O User manual

Dinstar

Dinstar UC2000-VE User manual

Dinstar

Dinstar MTG2000B User manual

Dinstar

Dinstar DAG2000-32 User manual

Dinstar

Dinstar DWG2000-1G User manual

Dinstar

Dinstar DAG1000-4S4O User manual

Dinstar

Dinstar DAG1000-4O User manual

Dinstar

Dinstar DWG2000-8G User manual

Dinstar

Dinstar UC100-1V1S1O User manual

Dinstar

Dinstar UC100-1G1S1O User manual

Dinstar

Dinstar DAG1000-4O User manual

Dinstar

Dinstar UC100 User manual

Dinstar

Dinstar DAG2000-16S User manual

Dinstar

Dinstar DAG Series User manual

Dinstar

Dinstar DAG1000 Series User manual

Dinstar

Dinstar DWG2000-1G User manual

Dinstar

Dinstar FXSFXO User manual

Dinstar

Dinstar MTG1000-4E1/T1 User manual

Dinstar

Dinstar DWG2000 Series User manual

Dinstar

Dinstar MMTG200 User manual

Dinstar

Dinstar MTG200 User manual

Dinstar

Dinstar UC120-1V1S1O User manual

Dinstar

Dinstar MTG2000 User manual

Dinstar

Dinstar DAG1000-1S User manual

Popular Gateway manuals by other brands

LST

LST M500RFE-AS Specification sheet

Kinnex

Kinnex Media Gateway quick start guide

2N Telekomunikace

2N Telekomunikace 2N StarGate user manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Original instructions

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE user guide

Telsey

Telsey CPVA 500 - SIP Technical manual

RTA

RTA 460A-NNA4 Product user guide

Shaw

Shaw Gateway HDPVR user manual

ABB

ABB VSN900 Commissioning manual

Commander

Commander Pulse owner's manual

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E manual

NETGEAR

NETGEAR C6300BD installation guide

Amit

Amit CDW531AM user guide

HMS

HMS Netbiter EasyConnect EC150 user manual

Huawei

Huawei EchoLife HG620 user guide

AT&T

AT&T U-verse 3801 Replacement self-installation guide

Logic IO

Logic IO RTCU MX2 turbo Technical manual

Suttle

Suttle MediaMAX MXM-521 installation instructions