Dimplex EF830 User manual

Electric replace

2000W

Original Instructions – EF830_V10521

WARNING: Read the instructions before using the appliance.

EF830

EAN: 5059340241678

BX220IM/B3

5059340241678-EF830_A5_IM_GB-V03.indd 15059340241678-EF830_A5_IM_GB-V03.indd 1 13-05-2021 13:17:2413-05-2021 13:17:24

EF830

Let’s

get started...

These instructions are for your safety. Please read through

them thoroughly before use and retain them for future

reference.

Getting Started... 02

Safety information 03

Your product 06

In more detail... 07

Product functions 08

Cleaning and maintenance 14

Technical specication 16

Installation 18

5059340241678-EF830_A5_IM_GB-V03.indd 25059340241678-EF830_A5_IM_GB-V03.indd 2 13-05-2021 13:17:2413-05-2021 13:17:24

EF830

Getting Started . . .

Safety warnings

PLEASE READ THE FOLLOWING INSTRUCTIONS

CAREFULLY BEFORE USING THE APPLIANCE.

> This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not

play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

> Children of less than 3 years should be kept away unless

continuously supervised. Children aged from 3 years and

less than 8 years shall only switch on/ off the appliance

provided that it has been placed or installed in its intended

normal operating position and they have been given

supervision or instruction concerning use of the appliance

in a safe way and understand the hazards involved.

Children aged from 3 years and less than 8 years shall not

plug in, regulate and clean the appliance or perform user

maintenance.

> CAUTION: Some parts of this product can become very

hot and cause burns. Particular attention has to be given

where children and vulnerable people are present.

> If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualied

persons in order to avoid a hazard.

> The heater must not be located immediately below a

socket-outlet.

Safety information

5059340241678-EF830_A5_IM_GB-V03.indd 35059340241678-EF830_A5_IM_GB-V03.indd 3 13-05-2021 13:17:2513-05-2021 13:17:25

EF830

Getting Started . . .

> Do not use this heater if it has been dropped.

> Do not use if there are visible signs of damage to the heater.

> When use this heater, please x it to the wall.

WARNING: To reduce the risk of re, keep textiles,

curtains, or any other ammable material a minimum

distance of 1 m from the air outlet.

> Do not use this heater in the immediate surroundings of a

bath, a shower or a swimming pool.

> CAUTION! In order to avoid a hazard due to inadvertent

resetting of the thermal cutout, this appliance must not be

supplied through an external switching device, such as a

timer, or connected to a circuit that is regularly switched

on and off by the utility.

> Connect the power plug to an easily reachable socket

outlet so that in case of an emergency the appliance can

be unplugged immediately. Pull the power plug out of the

socket outlet to completely disconnect the appliance from

the voltage.

> If the appliance is without plug, please following below

points:

Always switch off the mains supply during installation or

maintenance.

Means for disconnection having a contact separation

in all poles must be incorporated in the xed wiring in

accordance with the wiring rules.

WARNING: You need to connect the conductors of the

supply cable to a connection block ensuring the mains

polarity is followed as below:

The blue wire must be connected to the terminal marked

with an N or coloured black.

The brown wire must be connected to the terminal marked

with an L or coloured red.

Safety information

5059340241678-EF830_A5_IM_GB-V03.indd 45059340241678-EF830_A5_IM_GB-V03.indd 4 13-05-2021 13:17:2513-05-2021 13:17:25

EF830

Getting Started . . .

The yellow-green wire must be connected to the terminal

marked with an earthing symbol.

WARNING! Never connect live or neutral wires to the

earth terminal.

WARNING! In order to avoid overheating, do not cover

the heater.

Thermal Cut-Out

CAUTION! This product has one non-self-resetting overheat

protection devices. In the event that the heater stops working

as a result of overheating take the following immediate steps:

Switch the electricity off at the socket or off the replace power

switch. Remove any objects that are covering the product.

> CAUTION! Do not touch the heater as it will be hot.

Set the heater switches to O (off position) and leave the

heater to cool. Once completely cool, reconnect the heater

and switch it on.

Safety information

5059340241678-EF830_A5_IM_GB-V03.indd 55059340241678-EF830_A5_IM_GB-V03.indd 5 13-05-2021 13:17:2513-05-2021 13:17:25

EF830

Getting Started . . .

Your product

[01] x 1

SUN

[03] x 1

[02] x 1

[07] x 1 [08] x 1

[04] x 7 [06] x 3

[05] x 7

You will need

Screwdriver x 1

AAA 1.5V Battery x 2

Your product

5059340241678-EF830_A5_IM_GB-V03.indd 65059340241678-EF830_A5_IM_GB-V03.indd 6 13-05-2021 13:17:2713-05-2021 13:17:27

EF830

In more detail . . .

In more

detail...

Product functions 08

Cleaning and maintenance 14

Technical specication 16

Installation 18

5059340241678-EF830_A5_IM_GB-V03.indd 75059340241678-EF830_A5_IM_GB-V03.indd 7 13-05-2021 13:17:2713-05-2021 13:17:27

EF830

In more detail . . .

Intended use

> This product is intended for indoor use only. It is not intended for commercial use.

> This product is intended for xed installation only. Do not use it as a free standing

heater.

This product contains no user serviceable parts and requires little maintenance.

Leave any servicing or repairs to qualied personnel only. The LEDs contained in

this product are non-replaceable.

> Before connecting the appliance to the power supply, check that the power supply

voltage and current rating corresponds with the power supply details shown on the

appliance rating label.

Installation

NOTE: The wall mount fasteners included with this replace are for use ONLY with a

concrete walls. For wood walls, cinder blocks, or other wall types, consult a professional

for the best attachment methods.

NOTE: This product includes a GLASS panel! Always use extreme caution when handling

glass. Failure to do so could result in personal injury or property damage.

> This appliance is designed to be permanently xed to a wall at a minimum height of

300 mm from bottom of heater to oor. The wall bracket must be tted horizontally

and the cable routed to the bottom right of the heater.

A height of 600 mm from bottom of heater to oor is recommended for optimum

viewing of fuel bed (see Fig. 2 for recommend xing dimensions).

> Keep top of heater at least 1000 mm away from ceiling or other objects for optimum

heat ventilation.

For optimum viewing, mark the top ve screws xing positions on wall in accordance

with the recommend xing dimensions- see Fig. 2. Drill holes.

> Fix the wall bracket using the plugs and screws provided (05).

> Before the installation, take off the glass panel from the heater, and store the glass

panel in a safe place.

Carefully lift the heater up ensuring that the two top rear slots of heater engages the

wall bracket (see Fig. 3) and is sitting centrally.

> Gently bring the heater level with the wall.

Load the small wall bracket with the 2 pcs short screws (06) on the lower parts of

the heater (see Fig.4).

Mark the two bottom holes position-see Fig.5, remove the heater and keep the

heater in a safe position.

> Drill and t wall plug.

Place the front glass panel over the front of the heater aligning the hooks at each side

of the glass panel with the slots at each side of the heater body See-Fig.6. Then slide

down the glass panel in place. Again two people will be required for this operation.

Product function

5059340241678-EF830_A5_IM_GB-V03.indd 85059340241678-EF830_A5_IM_GB-V03.indd 8 13-05-2021 13:17:2813-05-2021 13:17:28

EF830

In more detail . . .

> Insert and tighten the front glass panel screw-Fig.7. to secure the front glass panel

to the heater.

Ret the heater to the wall xing bracket and use the screw provided (05) to

permanently x the heater in place.

Switching on/off

Use the on/off switch to power on the appliance (set it to standby mode).

In a standby mode, the appliance can be operated either manually, by the switches

located on the top right hand side of the appliance or by the supplied remote control.

Manual operation

NOTE: The appliance only starts working, if the set temperature is higher than

the ambient room temperature.

Appliance powered off

Appliance powered on, set to standby mode

> Press to switch the ame effect on/off.

Press and hold to toggle between 5 different ame

dim levels

Press to activate low level heating (1000 W)

Press to activate high level heating (2000 W)

Product function

5059340241678-EF830_A5_IM_GB-V03.indd 95059340241678-EF830_A5_IM_GB-V03.indd 9 13-05-2021 13:17:2813-05-2021 13:17:28

EF830

In more detail . . .

Remote control

NOTE: The appliance should be powered on using the on/off switch before it

can be operated using remote control.

Go up in menu

(change day)

- Switch the appliance on

- Set to standby mode

Set day/time

- Decrease temperature

- Decrease hour/minute

Conrm selection

Set automatic

heating mode

Press to activate

low level heating

Press to activate

high level heating

Go down in menu

(change day)

Cancel key

Set timer key

Timer on/off key

Toggle between 5

different ame dim levels

- Increase temperature

- Increase hour/minute

SUN

Product function

5059340241678-EF830_A5_IM_GB-V03.indd 105059340241678-EF830_A5_IM_GB-V03.indd 10 13-05-2021 13:17:2813-05-2021 13:17:28

This manual suits for next models

Table of contents

Other Dimplex Indoor Fireplace manuals

Dimplex

Dimplex Ignite XLF50 User manual

Dimplex

Dimplex OS2527GB User manual

Dimplex

Dimplex JAZ20N User manual

Dimplex

Dimplex BFSL33 User manual

Dimplex

Dimplex BF362SD User manual

Dimplex

Dimplex PRISM 34 User manual

Dimplex

Dimplex ELECTRALOG CFP3913 User manual

Dimplex

Dimplex PF2325 User manual

Dimplex

Dimplex BRENTA BNT20 User manual

Dimplex

Dimplex Opti-myst RTOPW20 User manual

Dimplex

Dimplex Lee LEE20 User guide

Dimplex

Dimplex DF2426 User manual

Dimplex

Dimplex OLF46-AM User manual

Dimplex

Dimplex DFI2309 User manual

Dimplex

Dimplex CFP4949BW User manual

Dimplex

Dimplex CASSETTE 400 User manual

Dimplex

Dimplex IN-STUD V1525BT User manual

Dimplex

Dimplex Canterbury CAB20F User manual

Dimplex

Dimplex MULTIFIRE DF3015 Quick start guide

Dimplex

Dimplex RBF30-AU User manual

Dimplex

Dimplex ENGDL20 S E User manual

Dimplex

Dimplex Mozart CFP3811GB User manual

Dimplex

Dimplex XLF60 User manual

Dimplex

Dimplex Adagio User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual