Dimplex Duo300i User manual

Dimplex DuoHeat Radiator - Quick Start Guide

for Models: Duo300i, Duo400i and Duo500i

Quick Start Guide - Setting the Controls

86484 Issue 1

DuoHeat has two output modes Comfort (Radiant Heat) and

Background (RetainedHeat). Eachneeds to beset to thecorrect

level to provide the optimum level of comfort.

For DuoHeat to operate correctly, both electricity

supplies must be switched on at all times.

Initial Set Up

Depending on your comfort requirements, there are three

recommended settings:

Low (e.g. holiday home during period of vacancy)

Normal (e.g. typical use)

High (e.g. sheltered accommodation).

Both the Comfort and Background heat settings need to be set

accordingly.

"Normal" Setting

This is the factory default setting, however you should check this

has not been altered by the installer.

Set the Background setting at the mid point (5th bar). To do

this, press the ++

++

+button until 10 bars are illuminated and continue

to hold for a further 7 seconds. Adjust by pressing the ++

++

+or --

--

-

buttons.

After 20 seconds, the display will revert to the standard Comfort

mode.

Set the Comfort control at the mid point (5 bars) by pressing the

++

++

+or --

--

-buttons to change the number of illuminated bars.

“Low” Setting

Reduce the Background setting to 1 bar.

Reduce the Comfort control to 1 bar.

Achieving Optimum Comfort Level

Iftheroomisnotatthedesiredtemperatureintheafternoon/evening:

Adjust the Comfort heat level up or down accordingly.

If the room is not at the desired temperature in the morning:

Adjust the Background level up or down accordingly.

Operate the radiator for 24 hours before making further

adjustments to the settings.

When making adjustments to the Background setting, it is

recommended that you do not change the setting by more

than one bar at a time.

Everyday Operation

Once the Background level has been set (seeAchieving Optimum

Comfort Level above), this should not require any further

adjustment.

Adjust the Comfort setting as required to suit your comfort needs

and occupancy pattern. The control can be lowered slightly (we

recommend by no more than 2 bars) to save energy when the room

is unoccupied and increased again when more heat is needed.

For more comprehensive advice on using your DuoHeat radiator,

please refer to the Operating Instructions.

Low Normal High

Low Normal High

“High” Setting

Increase the Background setting to 7.

Increase the Comfort control to 7.

Please note that at high setting the room temperature will be

warmer with a corresponding increase in running costs.

Operate the radiator for 24 hours before making further

adjustments to the settings.

FlashingBar FlashingBar

Glen Dimplex UK Limited

UK customer helpline (8.00AM - 6.00PM Mon-Fri; 8.30AM-1.00PM Sat)

Customer Help Line Tel: 0870 7270 101

Fax: 0870 7270 102

e-mail: [email protected]

Republic of Ireland Tel: 01 842 4833

This manual suits for next models

2

Other Dimplex Heater manuals

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide