Digitus DN-80066 User manual
8-Port Gigabit Switch
Unmanaged, Metal Housing
Quick Installation Guide
DN-80066
2
Copyright Statement
Our company reserves all copyrights of this document. Any
reproduction, excerption, backup, modification, transmission,
translation or commercial use of this document or any portion of
this document, in any form or by any means, without the prior
written consent of our company is prohibited.
Exemption Statement
This document is provided "as is". The contents of this document
are subject to change without any notice. Please obtain the latest
information through our company website. Our company
endeavors to ensure content accuracy and will not shoulder any
responsibility for losses and damages caused due to content
omissions, inaccuracies or errors
1Product Introduction
This is an 8 port 10/100/1000Mbps Ethernet Switch, provides the
seamless network connection. All ports support Auto MDI/MDIX
function, with 8 10/100/1000Mbps Auto-Negotiation RJ45 ports.
The Switch with a low-cost, easy-to-use, high performance
upgrade your old network to a 1000Mbps network.
The switch is easy to install and use. It is suitable for expanding
your home or office network. The LED on the front panel can
dynamically display the operation status of the network.
3
1.1 Features
8 x RJ45 ports 10/100/1000 Mbps
All ports support 10/100/1000 Mbps bandwidth
Support desktop and Wall mount installation
Switching Capacity: 16Gbps
Network standards: IEEE 802.3i, IEEE 802.3u, IEEE802.3x,
IEEE802.3ab, IEEE802.3az standards
Auto-negotiation / Auto-MDI/MDI-X
MAC address auto-learning and auto-aging
LED indicators for monitoring power, link/activity
Durable metal enclosure
1.2 Package Contents
1 x 8-port Gigabit Switch, Unmanaged
1 x Power Supply
1 x Quick Start Guide
4
1.3 Specifications
Interfaces
8x 10/100/1000Mbps
Adaptive Ethernet port
Power Supply
DC (DC) Input:
Rated voltage: 5V
Rated current: 1A
PoE
Nonsupport
Power Consumption
4W(Max)
Operating Temperature
0°C ~40°C
Storage Temperature
-40°C ~ 70°C
Operating Humidity
10% ~ 90% RH
Storage humidity
5% ~ 90% RH
Fan
No fan
Dimensions (W x D x H)
140x76x28mm
Switching Capacity
16Gbps
Hardware Version
V1.0
1.4 External Component Description
The front panel of the Route consists of a series of LED indicators.
The rear panel provides a DC power connector,
8*10/100/1000Mbps Adaptive Ethernet port. The left panel
provides a Ground Terminal.
Its appearance is shown below:
5
Front Panel
Annotation
1. PWR indicator
2. 10/100/1000Base-T Link/Act indicator
Rear Panel
Annotation
1. 10/100/1000Base-T Adaptive Ethernet port
2. DC power connector
1.5 Power Supply
Router power supply adopts direct current(DC) input：
Rated current: 1A
Rated voltage: 5V
1.6 Cooling Solution
DN-80066 adopts a fanless design. To ensure good hear
dissipation, when placing the chassis, a space of 10cmshould be
reserved on both sides of the chassis and the rear panel to
facilitate air circulation. Avoid blocking the openings the chassis,
otherwise the heat dissipation effect may be affected.
6
1.7 Indicator
Indicator
Faceplate
Marker
Status Indication
PWR
Status
Light
PWR
Off Power Off.
Solid
green
Power On.
Ethernet
port
indicator
1~8
Off
The port is
NOT connected.
Solid
green
The port is
connected at
10/100/
1000Mbps.
Blinking
The port
10/100/1000M data
transceiver.
2Installing and Connecting the Switch
This part describes how to install your Ethernet Switch and make
connections to it. Please read the following topics and perform
the procedures in the order being presented.
2.1 Installation
Please follow the following instructions in avoid of incorrect
installation causing device damage and security threat.
Put the Switch on stable place or desktop in case of
falling damage.
Make sure the Switch works in the proper AC input range and
matches the voltage labeled on the Switch.
7
To keep the Switch free from lightning, do not open the
Switch's shell even in power failure.
Make sure that there is proper heat dissipation from and
adequate ventilation around the Switch.
Make sure the cabinet to enough back up the weight of the
Switch and its accessories.
2.2 Desktop Installation
Sometimes users are not equipped with the 19-inch standard
cabinet. So when installing the Switch on a desktop, please attach
these cushioning rubber feet provided on the bottom at each
corner of the Switch in case of the external vibration. Allow
adequate space for ventilation between the device and the
objects around it.
2.3 Wall Installation
The Switch can also be installed on a wall. Two installing slots are
provided on the bottom of the Switch for this purpose. Please
make sure that the front panel is exposed in order to view the
LEDs. Please refer to the illustration below:
Step one:
Please drill two suitable holes,
press two expansion tubes into
the two holes respectively.
8
Step two:
Insert the screw into the
expansion tube.
Step three:
Hang the switch on the two
screws.
Step four:
Installation is completed.
2.4 Power on the Switch
The Switch is powered on by the External DC adapter 5V/1A
power supply. Please follow the next tips to connect:
Use the standard DC adapter to connect one end of the power
socket to the power DC interface of the back panel of the switch.
and check the power indicator is ON or not. When it is ON, it
indicates the power connection is OK.
9
2.5 Connect Computer (NIC) to the Switch
Please insert the NIC into the computer, after installing network
card driver, please connect one end of the twisted pair to RJ-45
jack of your computer, the other end will be connected to any RJ-
45 port of the Switch, the distance between Switch and computer
is around 100 meters. Once the connection is OK and the devices
are power on normally, the LINK status indicator lights
corresponding ports of the Switch.
Hereby Assmann Electronic GmbH, declares that the Declaration
of Conformity is part of the shipping content. If the Declaration of
Conformity is missing, you can request it by post under the below
mentioned manufacturer address.
www.assmann.com
Assmann
Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
Table of contents
Other Digitus Switch manuals
Digitus
Digitus KC-221 User manual
Digitus
Digitus DS-16100 User manual
Digitus
Digitus DN-651132 User manual
Digitus
Digitus DS-12874 User manual
Digitus
Digitus DS-45339 User manual
Digitus
Digitus DS-23200 User manual
Digitus
Digitus DA-70224-1 User manual
Digitus
Digitus DN-95347 User manual
Digitus
Digitus DN-80071 BLACK RAPID 1000 User manual
Digitus
Digitus DC-11201-1 User manual
Digitus
Digitus DS-11200-1 User manual
Digitus
Digitus DS-12860 User manual
Digitus
Digitus DN-80112-1 User manual
Digitus
Digitus DN-651126 User manual
Digitus
Digitus DS-23100-1 User manual
Digitus
Digitus Switcher User manual
Digitus
Digitus DN-95351 User manual
Digitus
Digitus DN-95357 User manual
Digitus
Digitus DN-650105 User manual
Digitus
Digitus DS-12880 User manual
