Digitron EX-9486-W User manual
EX-9486-W
Serial to WI-FI Converter
Operation Manual
First Edition, Oct 2007
1
Table of Contents
1. Introduction ………………………………………………… 3
Overview ………………………………………………… 4
Package Check List ………………………………………… 5
Product Features …………………………………………… 6
Hardware Specifications …………………………………… 8
2. Converter Description ……………………………………… 11
Product Panel Views ……………………………………… 11
Top Side …………………………………………………… 11
Right Side ………………………………………………… 12
Left Side …………………………………………………… 13
Rear Side ………………………………………………… 13
LED Indicators …………………………………………… 14
Wiring Architecture ……………………………………… 15
RS-232 …………………………………………………… 15
RS-422/RS-485 …………………………………………… 15
3. EX-9486-W Configuration ……………… 16
Software Setup and Initial IP Configuration …………… 16
EXTool Software Setup ……………………………… 17
EXTool Setup …………………………………… 17
Serial to Wi-Fi Configuration ……………………………… 19
Broadcast ……………………………………………………… 19
Device List …………………………………………………… 20
General ………………………………………… 20
Security ………………………………………… 21
Networking ……………………………………… 22
Wireless ………………………………… 22
Notification ……………………………………………… 23
2
Management …………………………………………… 23
Upgrade Firmware ……………………………… 24
Save/Load ………………………………………… 24
Port ………………………………………… 26
Serial Settings ………………………………………… 26
Service Mode ………………………………………… 27
Notification ……………………………………… 28
VCOM List ……………………………………… 30
Setup Wizard ……………………………… 31
Virtual Com Wizard ……………………………………… 31
Serial Tunnel Wizard ……………………………………… 33
Group IP Wizard ……………………………………… 34
Group Setup Wizard ……………………………………… 35
Group Firmware Wizard ……………………………… 37
IP Collection ……………………………………… 38
System Log ……………………………… 39
4. Web Console Configuration ……………… 40
Appendix A - FAQ ………………………………………… 38
Appendix B - Pin Outs and Cable Wiring ………… 39
DC Power Outlet ………………………………………… 39
RJ-45 Pin Assignment …………………………………… 39
RS-232 Pin Assignment ………………………………… 39
RS-232 Wiring Diagram ………………………………… 40
RS-422 Pin Assignment ………………………………… 40
RS-422 Wiring Diagram ………………………………… 40
RS-485 Wiring Diagram ………………………………… 40
3
1
1
Introduction
Serial-Server is providing new ways of connecting legacy serial converter devices to
a Local Area Network (LAN) or Wide Area Network (WAN). EX-9486-W is designed
to operate serial ports through wireless(Wi-Fi 802.11b & g) or entity line(RJ-45 cable)
over 100Mbit/s Ethernet networks. The data is transmitted via TCP/IP protocol.
Therefore control is available via Ethernet, Intranet and Internet. EX-9486-W is
packaged in a case well suited for industrial environments. All serial ports operate in
common RS-232 mode , industrial RS-422 and RS-485 modes configuration.
EX-9486-W is a low-cost, high performance design. By careful selecting high quality
with competitive prices components in the world, products made network
connectivity possible with affordable cost for virtually all kinds of devices.
The EX-9486-W can connect the Remote I/O Control module of EX9000 Series for
EX9000 Series to Wireless by RS-232/422/485. This operation manual will guide you
step by step for the various functions of the EX-9486-W.
The following topics are covered in this chapter:
Overview
Package Checklist
Block Diagram
Product Features
Product Specifications
4
Overview
EX-9486-W(ARM-9/200MHz SRAM/16MB FlashROM/8MB) is provide a
perfect solution to make your industrial serial devices Internet ready instantly
via wireless LAN. ARM-9 Series of EX-9486-W makes them the ideal choice
for connecting your RS-232 or RS-422/485 serial devices—such as PLCs/
meters/EX-9000 Series—to an IP-based Wi-Fi Ethernet LAN, making it
possible for your software to access serial devices anywhere and anytime over
a wireless local LAN or the Internet.
ARM-9 Series of EX-9486-W ensures the compatibility of network software that
uses a standard network API (Winsock or BSD Sockets) by providing TCP
Server Mode, TCP Client Mode, and UDP Mode. And thanks to ARM-9 Series’
Real COM/TTY drivers, software that works with COM/TTY ports can be set up
to work over a TCP/IP network in no time. This excellent feature preserves
your software investment and lets you enjoy the benefits of networking your
serial devices instantly.
ARM-9 Series of EX-9486-W support manual configuration via the handy web
browser console and many protocols including TCP, IP, UDP, HTTP, DHCP,
ICMP, and ARP. They are the best solution to network your serial devices.
5
Package Check List
EX-9486-W product is shipped with the following items:
□
□
□1 unit of EX-9486-W
□
□
□1 unit of Power Adaptor (12V DC, 1.2A)
□
□
□2 unit of dipole antenna(2.0dBi / 5.0dBi)
□
□
□Documentation & Software CD
□
□
□Quick Installation Guide
NOTE: Notify your sales representative if any of the above items is missing or
damaged.
6
Product Features
Data Conversion between RS-232/422/485 and Ethernet
Convert serial device (RS-232, RS-422, RS-485) data/signal into the
TCP/IP package data/signal and send them out with the Ethernet
DataStream; or convert the TCP/IP package data/signal into serial device
data/signal.
Wi-Fi Wireless Ethernet
It based on the latest industry standard Wi-Fi Certified IEEE 802.11g
specification; it offers maximum channel speeds of up to 54 Mbps. The
Wi-Fi function maintains interoperability within the 2.4 GHz frequency band,
offering full compatibility with 802.11b networks. This integrated wireless
solution of EX-9486-W is widely deployed in business environments and is
the standard for wireless access in public places. It also supports key
security features like Wi-Fi Protected Access (WPA), WEP and 802.1x.
Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration and
management.
Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
Server / Client Dual Modes
Series can be configured as network server or network client. In the client
mode, it can be installed in network which is protected by NAT router or
firewall, without the need of a real IP address.
7
Web-based Setup
Parameters setup is based on HTTP protocol by using standard browsers
(IE and Netscape). No special software would be required.
Built-in Security Control
Protected by both setup password and access password to prevent
intruders.
Remote updated
Firmware can be reprogrammed directly via Ethernet network to keep up
with latest network standards.
8
Hardware Specifications
WLAN
1. Port Type : RJ-45 ConnectorStandard Compliance: IEEE 802.11b/g
2. Spread Spectrum Technology: DSSS, OFDM
3. Tx Power 11b: Maximum 20 dBm
4. Tx Power 11g: Maximum 18 dBm
5. Rx Sensitivity: -70 dBm @ 54 Mbps, -85 dBm @ 11Mbps
6. Transmission Rate: 54 Mbps (max.) with auto fallback (54,48, 36, 24, 18,
12, 11, 9, 6, 5.5, 2, 1 Mbps)
7. Transmission distance: Up to 300 meters(@12 Mbps, in open areas)
8. Security: WEP 64-bit/128-bit data encryption, AES, WPA2
9. Antenna Connector: Reverse SMA
10. Network Mode: Infrastructure, Ad-Hoc
LAN for configuration / Ethernet hub
1. Ethernet: 10/100 Mbps, RJ45
2. Protection: Built-in 1.5 KV magnetic isolation
Serial Communication Parameters
1. No. of ports : 1 RS-232/422/485 port, male DB9, S/W selectable
2. RS-232 Signals : TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
3. RS-422 Signal : Tx+ , Tx- , Rx+ , Rx –
4. RS-485 Signal : Data+ , Data-
5. Serial Line Protection : 15 KV ESD for all signals
Beeper for event warning or unit positioning ( Optional)
9
Serial Communication Parameters
1. Parity: None, Even, Odd, Space, Mark
2. Data bits: 5, 6, 7, 8
3. Stop bits: 1, 1.5, 2
4. Flow control: RTS/CTS, XON/XOFF
5. Speed: 110 bps to 460.8+ Kbps
Power Requirements & Consumption
1. Power Input : 9 -12 VDC/500mA -1.2A
2. Power Line protection :
1 KV Burst (EFT), EN61000-4-4
0.5 KV Surge, EN61000-4-5
Environmental
1. Operating Temperature : -10 to 70°C (32 to 131°F), 5 to 95% RH
2. Storage Temperature : -20 to 85°C (-4 to 185°F), 5 to 95%RH
3. Regulatory Approvals
RoHS
EMC: FCC Class A, CE Class A
Safety: UL, CUL, TÜV
Class I, DIV II
Software Features
1. Protocols : ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet,
RTelnet, DNS, SNMP MIB II, HTTP, SMTP, SNTP
2. Serial mode : Virtual Com / TCP Server / TCP Client / UDP / Serial
Tunnel with advanced settings of
TCP Alive Check Timeout
Inactivity Timeout
Delimiter for Data Packing
Force TX Timeout for Data Packing
Table of contents
