Digital Watchdog CP-01 User manual
Compressor
Compressor 1 / 49
1 or 4 Channel
Network Video Encoder/Decoder
Instruction Manual
N VS
(Network Video Streamer)
Compressor
201010010
Before installing and using the product, please read
this manual carefully.
Be sure to keep it handy for future reference.
Compressor
Compressor 2 / 49
•Compressor is a Network Video Encoder that transmits real-time high-resolution digital
video and audio data with H.264 high compression rate over the Internet or Intranet.
•Compressor supports decoder mode that takes a H.264 stream from our IP camera or
video server via an Ethernet network and converts it in real-time with high quality analog
video signals. This allows analog video devices such as TV system, analog monitors or
existing analog video switches.
•Compressor contains digital video/audio compressor, web server and network interface.
Users can simply connect power source and network cable for operation. Additional
operation equipments or programs are not required.
•Compressor enables real-time web browser monitoring anytime and anywhere. It can be
installed in various places, including child care facilities, education institutions,
amusement parks, shopping malls, tourist attractions, construction and production sites,
warehouses, and roads.
•Easy to use - Compressor does not require an additional PC for operation. Users can
monitor video /audio data captured by the Compressor through your current PC. User
can get direct access to the data through Web Browsers (i.e. Internet Explorer or Firefox).
An IP address just needs to be assigned upon the first installation of the Compressor.
•High compatibility – Compressor supports TCP/IP for networking, SMTP for e-mail
exchange, and FTP protocol for file Transmission. Other online communication protocols
such as IMCP, DHCP, and HTTP are also supported. Thus, Compressor users can use
any OS out of Window, Unix, Macintosh, and OS/2 to access the system.
•Simple environment setting - Internet Explorer or Firefox can be used to modify user
environment settings for the Compressor.
•Embedded Linux O/S - Compressor uses the newest, leading networking technology.
Digital Watchdog optimized Linux with a 32-bit RISC CPU for the operation of
Compressor.
FEATURES
Compressor
Compressor 3 / 49
•Do not open or modify.
•Do not open the case, for it may be dangerous and cause damages.
•Do not put objects inside the unit.
•Make sure that no metal objects or flammable substances get inside the camera. It could
cause fire, short-circuits, or damages.
•Be careful when handling the unit.
•To prevent damage, do not drop the camera or subject it to shock or vibration.
•Do not install near electric or magnetic fields.
•Protect from humidity, dust, and high temperature.
•Compressor is for indoor use and is vulnerable to water and/or moisture.
•For outdoor use, an additional case that is temperature-controllable, damp-proof, and
waterproof is required.
•Cleaning:
•Dirt can be removed from the case only by wiping it with a soft cloth moistened with a
soft detergent solution.
•Mounting Surface:
•The material of the mounting surface must be strong enough to support the camera.
•Compressor can be used for surveillance purpose.
•Be thoroughly informed of related regulations prior to installation to ensure compliance
with such regulations.
PRECAUTIONS
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Compressor
Compressor 4 / 49
Before sending the Compressor out for repair, check the items below.
If the problem persists after the items have been checked, contact your service center.
▲If no image appears
•Is the LAN cable attached securely?
•Are the power and voltage normal?
•Is the connected camera normal?
•Is there adequate illumination?
▲If the image is unclear
•Is the connected camera lens in focus?
•Is the connected camera lens dirty?
•Dirt or fingerprints on the lens can adversely affect the images.
Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens cleaning
paper and some cleaning fluid (commercially available).
•Is the connected monitor adjusted correctly?
▲If the audio is not working
•Is the audio cable attached securely?
•Are the connected devices (amplifier, microphone, speaker, etc.) normal?
•Are the Client software and devices normal?
▲If the PTZ control is not working
•Is the RS485 cable attached securely?
•Is the connected PTZ Camera or PTZ driver normal?
•Is the RS485 control setting (Protocol, Baud Rate, Control ID, etc.) correct?
▲If the DIO is not working
•Is the DIO cable attached securely?
•Is the connected sensor or alarm device normal?
TROUBLESHOOTING
Compressor
Compressor 5 / 49
▲APPEARANCE
EXTERNAL
1. Reset (Factory Default Switch)
2. Sensor Input/Output
3. Stereo Jack)
4. Stereo Jack)
Video Input (BNC Connector)
6. Video Output (BNC Connector)
7. 10/100 Base-T LAN
CP-01 is PoE Ready.
8. Power (12V, 1000mA)
▶Front
▶Top
▶Side
▶Rear
1 2
3
4
6 7 8
CAUTION:
Check for polarity when using a PoE (Power over Ethernet) power supply.
-Support: IEEE 802.3af
Compressor
Compressor 6 / 49
▲DIMENSION (mm)
Compressor
Compressor 7 / 49
▲CONNECTION
•DC 12V - Power (Adapter, DC 12V/1000mA)
•ETHERNET - LAN cable (RJ45 Jack)
- A client PC or a network device is connected to the Compressor.
•VIDEO - Video cable (BNC Jack)
- IN: Input
- OUT: Mode Selectable Output
(Connected Camera or Received Image Over IP)
•AUDIO
- IN: Input from a microphone (Ø3.5 stereo jack)
- OUT: Output to a speaker (Ø3.5 stereo jack)
•DIO, PTZ – Control Cable
- DIO: In case a sensor or an alarm device is being used.
- PTZ: In case pan/tilt/zoom control (RS485) is being used.
INSTALLATION
▶
Connections – Power, LAN, Video, Audio, P/T, DIO
Compressor
Compressor 8 / 49
▲INSTALLATION PROCESS
1. Connecting power supply, LAN, and audio cables to the Compressor
※Network Configuration Example
NETWORK CONFIGURATION
Local Monitoring
CP
(Decoder)
Center Monitoring
NETWORK
CP
(Encoder)
Compressor
Compressor 9 / 49
2. Assigning an IP Address to the Compressor
- Assign an IP address with Compass, which is an Easy Network Configuration
Program
- Running Start > Program > NVS 4.1 > Compass
▶
Compass 2.0
Compressor
Compressor 10 / 49
3. Scan Compressor and Network Configuration
- Click “Scan Devices” button to search for Compressor, Network video Streamer,
on the local network where Compass runs.
- The Device List displays the basic information of the searched Compressor on the
local network. (Default IP address of the Compressor is 192.168.1.2.)
- Select a Compressor and change the network setup appropriately.
- After the setup, click “Save” button.
- Refer to “Compass” manual for details.
4. Accessing Compressor with a Web Browser
- Open a web browser on your PC and enter the IP address assigned to the
Compressor in the following format:
http://72.243.193.232/
▶
Login Page
This manual suits for next models
1
Table of contents
Other Digital Watchdog Other manuals
