Digital Projection HIGHlite 660 Series User manual

Rev E November 2012

USER GUIDES

INSTALLATION AND QUICK-START GUIDE

CONNECTION GUIDE

OPERATING GUIDE

REFERENCE GUIDE

112-668E

HIGHlite 660 Series

High Brightness Digital Video Projector

Digital Projection HIGHlite 660 Series

Rev E November 2012

About These Guides

Please keep these Guides handy for future reference.

A serial number is located on the back of the projector. Record it here:

Symbols used in these Guides

Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:

ELECTRICAL WARNING: this symbol indicates that there is a danger of electrical shock unless the instructions are closely

followed.

WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless

the instructions are closely followed.

NOTE: this symbol indicates that there is some important information that you should read.

Product revision

Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features

without prior notice.

Legal notice

Trademarks and trade names mentioned in this document remain the property of their respective owners.

Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.

Notes

Rev E November 2012

HIGHlite 660 Series

High Brightness Digital Video Projector

INSTALLATION AND QUICK-START GUIDE

Digital Projection HIGHlite 660 Series CONTENTS Installation and Quick-Start Guide

Rev E November 2012

CONTENTS

What’s In The Box? ..............................................................................Inst 1

Getting To Know The Projector ..................................................Inst 2

Front and rear views ..............................................................................Inst 2

Remote control.......................................................................................Inst 2

Control panel and indicators.................................................................Inst 3

Positioning The Screen And Projector...................................Inst 4

Fitting The Lens .....................................................................................Inst 5

Operating The Projector ..................................................................Inst 6

Switching the projector on....................................................................Inst 6

Selecting an input signal or test pattern..............................................Inst 6

Input signal.....................................................................................Inst 6

Test pattern ....................................................................................Inst 6

Adjusting the lens ..................................................................................Inst 7

Zoom..............................................................................................Inst 7

Focus .............................................................................................Inst 7

Shift................................................................................................Inst 7

Adjusting the image...............................................................................Inst 7

Orientation and On-Screen Display settings..................................Inst 7

Keystone ........................................................................................Inst 7

Picture............................................................................................Inst 7

Switching the projector off....................................................................Inst 8

Digital Projection HIGHlite 660 Series WHAT’S IN THE BOX? Installation and Quick-Start Guide

Inst 1

Rev E November 2012

What’s In The Box? Notes

Make sure your box contains

everything listed. If any pieces are

missing, contact your dealer.

You should save the original box

and packing materials, in case you

ever need to ship your projector.

The projector is shipped without a

lens.

Only one power cable - dependent

on the destination territory - will be

supplied with the projector.

Remote control

(105-023)

4x AAA batteries

Power cable, United Kingdom

(102-180)

User Guides on CD

(111-975)

Important Information (111-971)

Power cable, Europe

(102-163)

Power cable, North America

(102-165)

Projector

Digital Projection HIGHlite 660 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide

Inst 2

Rev E November 2012

Getting To Know The Projector

Front and rear views

Notes

The projector uses the standard

Digital Projection infra-red remote

control.

Only the controls shown highlighted

are used on this projector.

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Remote control

Lens

Air

outlet

Front

infra-red

window

Transmit

indicator

Remote

control

backlight

On/Off

40°

Infra-red

reception

Connection

panel

Rear

infra-red

window

Adjustable

feet

Mains

input

Control

panel

Air

inlet

Digital Projection HIGHlite 660 Series GETTING TO KNOW THE PROJECTOR Installation and Quick-Start Guide

Inst 3

Rev E November 2012

Control panel and indicators

The indicators on the control panel are as follows:

Power off = NO POWER

green = normal RUNNING mode amber = STANDBY mode

Shutter amber = CLOSED green = OPEN

Error off = NO ERROR

ashing = ERROR (temperature) steady = ERROR (voltage)

IR blue ash = Remote control command received

Lamp 1 off = OFF

ashing red = LAMP ERROR green = ON (100%) amber = (85 - 99%)

ashing green = LAMP WARM-UP ashing amber = COOL-DOWN

Lamp 2 off = OFF

ashing red = LAMP ERROR green = ON (100%) amber = (85 - 99%)

ashing green = LAMP WARM-UP ashing amber = COOL-DOWN

Notes

Only the controls shown highlighted

are used on this projector.

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Digital Projection HIGHlite 660 Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide

Inst 4

Rev E November 2012

Positioning The Screen And Projector

• Install the screen, ensuring that it is in the best position for viewing by your audience.

• Mount the projector, ensuring that it is at a suitable distance from the screen for the image to ll the screen. Set the adjustable feet so that

the projector is level, and perpendicular to the sceen.

• The dimension drawing below shows the positions of the feet for table mounting, and the xing holes for ceiling mounting.

Notes

Always allow the projector

to cool for 5 minutes before

disconnecting the power or

moving the projector.

Ensure that there is at least

30cm (12in) of space between the

ventilation outlets and any wall,

and 10cm (4in) on all other sides.

Do not stack more than 3

projectors.

Do not tilt the projector more than

±12° from side to side when in

use, as this may cause serious

lamp failure, damage the lamp

module and cause extra cost on

replacement.

±12° 360°

All dimensions are in mm.

Digital Projection HIGHlite 660 Series FITTING THE LENS Installation and Quick-Start Guide

Inst 5

Rev E November 2012

Fitting The Lens

• Remove the six screws securing the front cover to the body of the projector.

• Remove the front cover from the projector.

• Push down the lens holder tab.

• Hold down the tab, and insert the lens into the lens aperture, making sure that the plug on the zoom drive mechanism lines up with the

socket on the right of the lens aperture.

• Still holding down the tab, push the lens in rmly as far as it will go.

• Rotate the lens clockwise as far as it will go.

• Release the lens holder tab.

• Replace the front cover and secure it with the six screws.

Fixing

screws

Lens

holder

tab

Socket

Lens

Notes

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Always allow the lamp to cool for

5 minutes before:

- disconnecting the power

- moving the projector

Digital Projection HIGHlite 660 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide

Inst 6

Rev E November 2012

Operating The Projector

Switching the projector on

• Connect the power cable between the mains supply and the projector. Switch on at the switch next to the power connector.

• Wait until the self-test has completed and the standby indicator on the projector control panel shows amber. The lamp will be off and the

projector will be in STANDBY mode.

• Press on the remote control or the control panel and hold for 3 seconds, to switch the projector ON. The power indicator on the

control panel will show green, the lamp will light and the shutter will open.

Selecting an input signal or test pattern

Input signal

• Connect an image source to the projector. The signal should be automatically detected by the projector,

and should be displayed within two or three seconds.

If more than one signal is connected, then select the image you want to display:

• Press one of the Input buttons, to on the remote control, or

• Open the On-screen display (OSD) by pressing .

• Select an input signal from the Input Selection menu, using the and buttons.

Test pattern

If you have no image source connected to the projector, then you can display a test pattern instead:

• Open the OSD by pressing .

• Select Test Pattern from the Input Selection menu, using the and buttons.

• Select a pattern from the Test Pattern menu, using the and buttons.

• Close the OSD by pressing again.

Notes

For full details of how to use the

controls and the menu system, see

the Operating Guide.

Other manuals for HIGHlite 660 Series

Table of contents

Other Digital Projection Projector manuals

Digital Projection

Digital Projection E-Vision 6800 3D Series User manual

Digital Projection

Digital Projection E-Vision 7500 Series User manual

Digital Projection

Digital Projection E-Vision 6000 Series User manual

Digital Projection

Digital Projection M-Vision Cine 3D series User manual

Digital Projection

Digital Projection HIGHlite Laser 3D Series User manual

Digital Projection

Digital Projection INSIGHT 4K Dual LED Series User manual

Digital Projection

Digital Projection TITAN sx+-330-3D L or P User manual

Digital Projection

Digital Projection Titan series User manual

Digital Projection

Digital Projection HIGHlite 6000 User manual

Digital Projection

Digital Projection dVision 30sx+ User manual

Digital Projection

Digital Projection Titan Super Quad User manual

Digital Projection

Digital Projection TITAN Quad 1080p-3D User manual

Digital Projection

Digital Projection HIGHlite Cine 260 HB User manual

Digital Projection

Digital Projection HIGHlite Cine 330 3D Series User manual

Digital Projection

Digital Projection INSIGHT 4K Dual LED Series User manual

Digital Projection

Digital Projection HIGHlite 660 3D Series User manual

Digital Projection

Digital Projection TITAN 1080p-600 User manual

Digital Projection

Digital Projection E-Vision Laser 6500 Series User manual

Digital Projection

Digital Projection TITAN sx+600 User manual

Digital Projection

Digital Projection E-Vision 7500 Series User manual

Digital Projection

Digital Projection TITAN sx+ Pro Series 3 User manual

Digital Projection

Digital Projection HIGHlite 660 3D Series User manual

Digital Projection

Digital Projection TITAN LASER WUXGA Datasheet

Digital Projection

Digital Projection LIGHTNING 30sx+c User manual

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual