Digisol RANGER SERIES User manual

RANGER SERIES

LOAD BALANCING ROUTER WITH 2xFE

WAN, 1x3G/4G ENABLED USB, 3xFE LAN

DG-LB1054UV

V2.0

2018-08-28

Company has an ongoing policy of upgrading its products and it may be

possible that information in this document is not up-to-date.

Please check with your local distributors for latest information.

No part of this document can be copied or reproduced in any form

without written consent from the company.

Trademark

DIGISOLTM is a trademark of DIGISOL Systems Ltd. All other

trademarks are the property of the respective manufacturers.

The following items should be present in your package:

DG-LB1054UV (1 No.)

PowerAdapter

Patch Cord

Quick installation guide

Installation software CD (includes User Manual & QIG)

Make sure that the package contains above items.If any of the listed

items is damaged or missing,please contact your retailer immediately.

Congratulations on your purchase of this outstanding product DG-

LB1054UV. This device is specifically designed for SMB & SOHO

offices, small shops and chain stores. No matter offices are located at

wire unreachable area, it can connect to Intranet of headquarter

instantly via fixed line and/or cellular network. No need to apply for

expensive leased line in advance. With multiple WAN load balance and

fail-over, it guarantees non-interrupt operation.

By IPSec/PPTP/L2TP VPN tunneling and failover technology, it can

establish a secure non-stop connection with headquarter even IP is

changing all the time. Firewall protection is useful to avoid hackers

attacking. With embedded robust security and firewall function, it’s

suitable for remote branch offices to access the corporate database &

servers located in headquarter data center through internet. Besides,

this device also provides VoIP feature to enable secure and cost

effective Intranet voice communication through internet.

Instructions for installing and configuring this product can be found in

this manual. Before you install and use this product, please read this

manual carefully for fully exploiting the functions of this product.

Safety Instructions

Attention

Do not use the product in high humidity or

high temperatures.

Only use the power adapter that comes with

the package. Using a different voltage rating

power adaptor may damage the product.

Do not open or repair the case yourself. If the

Product is too hot, turn off the power

immediately and have it repaired at a

qualified service center.

Place the Product on a stable surface and

avoid using this product and all accessories

outdoor.

Network Requirements

An Ethernet RJ-45 Cable or DSL modem.

3G/4G cellular service subscription.

IEEE 802.11n or 802.11b/g wireless clients.

10/100/1000 Ethernet adapter on PC / NB.

Web-based Configuration

Utility Requirements

Computer with the following:

Windows®, Macintosh, or Linux-based

operating system.

An installed Ethernet adapter.

Browser Requirements:

Internet Explorer 6.0 or higher.

Chrome 2.0 or higher.

Firefox 3.0 or higher.

Safari 3.0 or higher.

CD Installation Wizard

Requirements

Computer with the following:

Windows® 7 / 8, Vista®, or XP with Service

Pack 2.

An installed Ethernet adapter.

CD-ROM drive.

Hardware Installation

FRONT VIEW

REAR VIEW

USB

Auto MDI/MDIX RJ-45 Ports

Receptor

for Power

Adapter

Reset

Button

Power

ON/OFF

Switch

LED Indicators

LED

Symbol

Description

Power

OFF: Device is powered down.

Orange: Device is booting up.

Green (Steady): Device is powered on.

Orange in flash: Device is in recovery mode

or abnormal.

WAN

Green: Ethernetconnection is established.

Green in flash: Data packet transferred

through WAN.

OFF: No Ethernet cable attached or Device

not linked.

LAN1 ~

LAN4

Green: Ethernetconnection is established.

Green in flash: Data packet transferred via

Ethernet.

OFF: No Ethernet cable attached or Device

not linked.

System Login

Browse to Activate the Setup Wizard

Type in the IPAddress (http://192.168.123.254) *

Preview

Type the default Password ‘admin’ in the

System Password and then

click ‘login’ button.

Remark:

* 1. The default LAN IP address of this gateway is 192.168.123.254. If you

change it,you need to type the new IP address.

*2. It’s strongly recommended that you change this login password from

default value.

Select your language.

Select “Wizard” for basic settings in a simple way.

Or, you can go to Basic Network /Advanced Network / System to setup

the configuration by your own selection.

Following are the solutions to problems that may occur during the

installation and operation of the DIGISOL DG-LB1054UV.

1) I cannot configure the router even when the cable is plugged and the

LED is Lit.

Do a Ping test to make sure that the load balancing Router is

responding.

Go to Start > Run.

Type cmd.

Note: It is recommended that you use

an Ethernet connection to configure it

Press OK.

Type ipconfig to get the IP of default gateway.

Type “ping 192.168.123.254”. Assure that you ping the correct IP

Address assigned to the load balancing Router. It will show four

replies if you ping correctly.



Ensure that your Ethernet Adapter is working, and that all network

drivers are installed properly. Network adapter names will vary

depending on your specific adapter. The installation steps listed

below are applicable for all network adapters.

Go to Start > Right click on “My Computer” > Properties.

Select the Hardware Tab.

Click Device Manager.

Double-click on “Network Adapters”.

Right-click onWired Card bus Adapter or your specific network

adapter.

Select Properties to ensure that all drivers are installed properly.

Look under Device Status to see if the device is working properly.

Click “OK”.

Other manuals for RANGER SERIES

This manual suits for next models

Table of contents

Other Digisol Network Router manuals

Digisol

Digisol DG-BG4300NU User manual

Digisol

Digisol DG-BG4300NU Installation guide

Digisol

Digisol DG-BR5411QAC User manual

Digisol

Digisol DG-BR5411QAC User manual

Digisol

Digisol DG-BG1100U User manual

Digisol

Digisol DG-HR1160M User manual

Digisol

Digisol DG-FS4528E User manual

Digisol

Digisol DG-HR1400 Dimensions

Digisol

Digisol DG-IS4512HP User manual

Digisol

Digisol DG-HR1400 User manual

Digisol

Digisol DG-FS1510HPE User manual

Digisol

Digisol DG-GR1010 User manual

Digisol

Digisol DG-FS4552 User manual

Digisol

Digisol DG-BR5400QAC User manual

Digisol

Digisol DG-HR1400 User manual

Digisol

Digisol DG-BG4011N User manual

Digisol

Digisol DG-GR4010 User manual

Digisol

Digisol DG-FS1526HP User manual

Digisol

Digisol DG-BG100 User manual

Digisol

Digisol DG-BG4011N User manual

Digisol

Digisol DG-LB1054UV User manual

Digisol

Digisol DG-GS1500E series Programming manual

Digisol

Digisol DG-GS1512HP User manual

Digisol

Digisol DG-GR6010 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview