Digimate L-1431W User manual
1
Contents
English .……………………………………………………………………………2
繁體中文 .…………………………………………………………………………8
简體中文 .………………………………………………………………………..14
Français .………………………………………………………………..............20
Deutsh .…………………………………………………………………………..26
Italiano .…………………………………………………………………………..32
Español …………………………………………………………………………..38
Português .………………………………………………………………….........44
Dutch ….…………………………………………………………………….……50
2
GettingStart
Notice.……………………………………………………………………………………………………………3
Safety Information………………………………………………………………………………………………3
Precaution……………………………………………………………………………………………………….3
Package Contents……………………………………………………………………………………………...3
Hardware Installation…………………………………………………………………………………………...4
Control Buttons………………………………………………………………………………………………….4
OSD (On-Screen Display) Menu Mode……………………………………………………………………5
Troubleshooting………………………………………………………………………………………………..6
Supported Timing………………………………………………………………………………………………6
Specification……………………………………………………………………………………………………7
3
◇Notice
‧ All Information in this manual may change from time to time without prior notice.
‧ To ensure safety operation of this product, please read the following menu carefully before using this product.
◇Safety Information
‧ Do not place anything wet on the monitor or the power cord.
‧ Be sure to turn the monitor off before plugging the power cord into the socket.
‧ Be sure to check the power cord and the other cords are securely and rightly connected.
‧ Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase.
◇Precaution
‧ Do not expose the monitor to direct sunlight or heat.
‧ Do not spill liquid on the monitor.
‧ Do not use your monitor when magnets or electronic products are operating nearby.
‧ Do not use harsh chemicals or strong cleaning solvents to clean the monitor screen. Wipe it with clean, soft clothes
applied with mild solution.
‧ Do not place anything on your monitor. Bad ventilation may elevate temperature in the monitor.
‧ Do not use your fingers to touch the LCD Screen directly. Fingerprint that contains oil and may be difficult to clean.
Package Contents
Our LCD monitor contains these following items. Make sure you get items listed below, otherwise contact to your dealer or
store.
1. 14.1” TFT LCD Monitor
2. Power Cord
3. VGA Cable
4. Audio Cable
5. User’s Manual
6. Warranty Card
4
Hardware Installation
Be carefully to your LCD monitor, it’s very exquisite but easy to broken. Turn off LCD’s and PC’s power before you set it up.
Follow our installation step by step.
Input
AC input：This is for connecting the power cable.
VGA port : This can be connected with the D-Sub 15 pin signal Cable.
Audio in：This can be connected to the PC audio-out connector of sound
resource.
Control Buttons
There are 5 keys for user to set up the monitor, including "Auto Adjust", "OSD menu", "Power", "Adjust <->", "Adjust <+>".
The following descriptions are the introduction of these Keys.
A
Auto Adjust (Function)--
Function Select Button: This button allows you to select the control functions up in the OSD.
Hotkey: Press this button to apply the monitor setting automatically.
M
Menu (Function)--
Function Select Button: This button allows you to select the control functions down in the OSD.
Hotkey: Press this button to get a pop-up OSD menu.
Power: Turn the LCD power on and off. When the power is on, the light is showing green, Stand by will be orange.
- Adjust < - >: Decrease the option value in the OSD menu.
+ Adjust < + >: Increase the option value in the OSD menu.
5
OSD (On-Screen Display) Menu Mode
1. Please adjust your Speaker Volume via your PC computer Speaker Volume control icon.
2. Please note that Sound will continue to play when your monitor is off, to turn off please turn off your PC computer or
mute the Speaker Volume control icon.
3. Press the OSD button to access menu, and press Increase / Decrease button for adjustment.
MISCELLANEOUS
RETURN Return to main menu.
OSD H-POSITION Ad
j
ust the horizontal
p
osition of the OSD.
OSD V-POSITION Ad
j
ust the vertical
p
osition of the OSD.
OSD DURATION Ad
j
ust the timin
g
of the OSD menu.
AUTO COLOR Ad
j
ust the color automaticall
y
.
CONTRAST Adjust the difference between light and dark area.
PHASE Adjust the phase of PLL.
CLOCK Adjust the frequency of the PLL.
H-POSITION Adjust the horizontal position of the display.
V-POSITION Adjust the vertical position of display.
RESET Recall the default setting.
COLOR TEMPERATURE Adjust the color temperature.
RED Adjust the Red color temperature.
GREEN Adjust the Green color temperature.
BLUE Adjust the Blue color temperature.
LANGUAGE Select the display language of the OSD Menu.
MISCELLANEOUS 〝No〞will take you to the exit menu.〝
Y
es〞will bring you to the sub menus
of the Miscellaneous menu.
EXIT OSD Saving and Leave.
BRIGHTNESS Adjust the brightness of the display.
6
Troubleshooting
Make sure that your monitor is properly installed if you have encountered any trouble using this product.
˙There is no picture on the screen.
Check: 1.Power saving mode. Press any key and move the mouse to deactivate the mode.
2.Signal cable connector pins. If there are bent or missing pins, consult your place of purchase.
˙Characters look too dark or too light
Check: Using OSD Menu to adjust the Brightness.
˙When your monitor shall be adjusted?
Check: If the resolution of frequency is being changed.
. The text appears on the screen are unclear.
Check: Make sure the resolution or refresh rate match with the Display Mode.
Supported Timing
Display Mode
Resolution Vertical Frequency (Hz) Horizontal Frequency (KHz)
640x480 59.94 31.47
800x600 56.25 35.16
800x600 60.32 37.88
1024x768 60.00 48.36
1280x800 59.81 49.702
7
Specification
LCD Panel Type
Viewing Angle
Contrast Ratio
Brightness
Response Time(Tr+Tf)
Display Colors
Max Resolution
Pixel Pitch
14.1” TFT Active Matrix LCD Display
H:90° , V:55°
350 : 1 (Typical)
200 cd/m2 (Typical)
16 ms
262K colors
1280X800(WXGA)
0.237mm(H)x0.237mm(V)
Input Signals VGA VGA compatible analog RGB Composite sync supported
Compatibility PC Up to 1280X800@60Hz(Non-interlaced)
Connector VGA
Audio
Power
D-sub 15-pins
Stereo Phone Jack
A/C Input
Power Voltage
Consumption
Power saving mode
Built-in universal power supply: 100-240 VAC, 50/60 Hz
Active < 24 Watt Max.
Standby < 2 Watt
Internal Speaker Speaker x 2
User Interface LED Indicator Active - Green
Standby - Orange
Operating Condition Temperature
Humidity
Operating:5°C to 40°C
20% ~ 80% R.H.
Dimensions Physical 379.4 mm(W) x 338.9 mm(H) x 172.8 mm(D)
Net Weight 2.2 Kg
DDC DDC2B
Power Management VESA DPMS
Regulation (Certifications) UL/CUL, FCC, CE
8
開始
注意事項.……………………………………………………………………………………………………….9
安全事項……………………………………………………………………………………………….............9
警示……………………………………………………………………………………………………….........9
包裝……………………………………………………………………………………………........................9
硬體安裝…………………………………………………………………………………………....................10
控制按鍵介紹…………………………………………………………………………………………………..10
OSD 視控模式………………………………………………………………………………………………11
簡易故障排除…………………………………………………………………………………………………..12
支援顯示模式…………………………………………………………………………………………………..12
產品規格表….…………………………………………………………………………………………………13
9
◇注意事項
‧ 所有使用手冊中之資訊，將不定時更新並不予通知。
‧ 請詳讀此使用手冊，以確保安全使用本產品。
◇安全事項
‧ 請勿放置任何潮濕物品於螢幕或電源上。
‧ 在插入電源線前，請先確保本產品電源為關閉狀態。
‧ 請確認電源線與所有線材、訊號接頭皆已接妥。
‧ 請勿嘗試自行拆卸本產品，您可能因而觸電受傷，如有需要，您可向所購買的經銷商查詢，或與我們連絡。
◇警示
‧ 請勿將本產品直接曝曬於陽光下，或高溫熱源處。
‧ 切勿讓液體濺灑到螢幕上。
‧ 請勿將液晶螢幕靠近有磁場的電器用品。
‧ 請勿使用有害的化學清潔劑或強力清潔劑來清潔螢幕。請用軟質刷毛和溫和的清潔劑。
‧ 不可在液晶螢幕上堆放雜物，放置於不良通風處可能導致機器高溫。
‧ 請勿直接用手指觸碰螢幕表面，皮膚所含的油脂是相當不易被清除的。.
包裝
本產品包裝包含下列物件，若有缺件，請向您購買之商店或經銷商聯絡，如有任何疑問歡迎來電。
1. 14.1 吋TFT 液晶螢幕顯示器
2. 電源線
3. 外接式 15 針D-sub (RGB Analog) 訊號線
4. 音源線
5. 使用手冊
6. 保固卡
Table of contents
Languages:
Other Digimate Monitor manuals
Digimate
Digimate L-1721 User manual
Digimate
Digimate IPS-2703WPH User manual
Digimate
Digimate IPS-2402WDH User manual
Digimate
Digimate L-1725 User manual
Digimate
Digimate L-1523 User manual
Digimate
Digimate L-1731W User manual
Digimate
Digimate L-1925 Technical manual
Digimate
Digimate L1916 User manual
Digimate
Digimate L-2041W User manual
Digimate
Digimate L-1734 User manual
