Diamond UD300C User manual
UD300C User Manual
1. Features:
① USB3.1 Gen1 Type-A port (5Gbps).
② USB 3.1 Gen1 Type-C port, data transfer speed up to 5Gbps and
support USB Power Delivery, allow you to charge your computer
while using the hub simultaneously. Compatible with USB Power
Delivery Revision 2.0 Version 1.1, maximum power output up to
20V3A.
③ Mini DP 1.2 port, supports 4K 30Hz resolution.
④ HDMI1.4 port, supports 4K 30Hz resolution.
⑤ VGA port, supports 1920*1080P resolution.
⑥ Support Multi-Stream Transport (MST) function, provide DisplayPort /
HDMI/ VGA Port connect 3 monitors for extend display mode or mirror
display mode.
⑦ Gigabit Ethernet provides a fast and stable internet connection.
Support IPv4 / IPv6 network, Wake-On-LAN, Full Duplex and power
management.
⑧ With LED light to indicate working status.
Windows7/8/8.1/10 (32/64bit/ Linux kernel 3.x / Mac OS X 10.5 to
10.15 or later.
Mac OS (SST Only)
Mirror mode: 1(host laptop)-1-1-1
Extended mode: 1(host laptop)-2-2-2
Windows OS (MST and SST)
MST mode:
Two displays: 1(host laptop)-2-3
Triple displays: 0(host laptop)-1-2-3
2. Multi-Stream Transport (MST) function Setting
Connect the USB C cable the USB-Cable to your laptop and then connect
downstream for HDMI, VGA, Mini DP to the screen and following the step
as below:
Note: For the dock to support power delivery to your laptop, your
power adapter must support a min. of 60W Power Adapter that is not
included
(1) MAC OS
① Click on “About This Mac”
② Click on Display
③ Click on “Displays Preference”
④ If you choose “Mirror Displays” you can get 4 Mirrored displays, if
you don’t choose “Mirror Display, you can get a maximum of one
extended display using HDMI, Mini DP or VGA
(2) Windows System MST Setting:
① Double click the desktop, chose “Intel Graphics Setting”
② Select “Display”
③ Select “Multiple Displays” to set triple display support using HDMI,
VGA and Mini DP.
Supported Resolutions
Windows source
(4K@30Hz)
VGA
(1080P@60Hz)
HDMI
(4K@30Hz)
Mini DP
(4K@30Hz)
1
(4K@30Hz)
2
(1080P@60Hz)
3
(4K@30Hz)
*
1
(4K@30Hz)
2
(1080P@60Hz)
*
3
(4K@30Hz)
1
(4K@30Hz)
*
2
(1080P@60Hz)
3
(4K@30Hz)
No image
1
(1600*900 @ 60Hz)
2
(1080P@60Hz)
3
(1080P@60Hz)
3. Network settings:
(1) Mac OS Network Setting
Click [Advanced – TCP/IP – Using DHCP with manual address] to
assign IP address manually.
(Windows System Network Setting
[Computer Management - Device Manager]
Click [Control Panel – Network and Internet – Network Connection] to view
the new internet connection. If the network obtains the IP address
automatically, you will be able to connect to network, as shown in below.
To set the IP address manually, double click the network logo and follow the
below steps. Like below:
Other Diamond Docking Station manuals
