DGSHAPE monoFab SRM-20 User manual
Guide for Cutting
with MODELA Player 4
Guide for Cutting
with SRP Player
Preparing the Machine
Double Sided Cutting Manual
This manual provides basic instructions on how to perform double-sided
cutting using one of the two included software programs: SRP Player and
MODELA Player 4. For information on any use of SRP Player or MODELA
Player 4 not covered herein, see the Help for each software program.
"User’s Manual “Display Help Dialog”
For information on basic operation, one-sided cutting, maintenance, and
other procedures, refer to the User’s Manual.
2
Contents
Contents .....................................................2
Preparing the Machine .......................................4
Preparing the Machine........................................5
Flow Diagram ...........................................5
STEP 1 : Turning the Power On ...........................6
STEP 2 : The Machine Run-in .............................7
STEP 3 : Conrm the Command Set.......................9
STEP 4 : Register the Cutting Tool You Want to Use
(when you are using SRP Player)........................ 10
STEP 5 : Attach the Cutting Tool ........................ 11
Guide for Cutting with SRP Player........................... 14
The Flow of Double-Sided Cutting .......................... 15
The Flow of Double-Sided Cutting ..................... 15
Items Necessary for Cutting ................................. 16
Items to Prepare Yourself............................... 18
Preparing the Material ...................................... 19
STEP 1 : Attach the Material to the Scrap Board ......... 19
STEP 2 : Install the Cutting Tool......................... 21
STEP 3 : Set the Origin Point............................ 22
STEP 4 : Level the Scrap Board Surface.................. 26
STEP 5 : Perform the Surface Leveling of the Material ... 28
STEP 6 : Level the Bottom Surface of the Material ....... 30
Creating an SRP Player File .................................. 31
STEP 1 : Measure the Thickness of the Material.......... 31
STEP 2 : Determine the Size and
Orientation of the Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
STEP 3 : Determine What to Do......................... 35
STEP 4 : Create the Cutting Data........................ 37
STEP 5 : Preview the Result of Cutting .................. 40
Cutting (Double Sided). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
STEP 1 : Set the Origin Point............................ 41
STEP 2 : Perform the Roughing ......................... 42
STEP 3 : Perform the Finishing.......................... 47
STEP 4 : Set the Drilling Process ........................ 52
STEP 5 : Drill the Scrap Board........................... 56
STEP 6 : Reverse the Material ........................... 60
STEP 7 : Cut the Bottom Surface ........................ 62
STEP 8 : Remove the Cut Material....................... 63
STEP 9 : Turning the Power O ......................... 64
Guide for Cutting with MODELA Player 4.................... 65
The Flow of Double-Sided Cutting .......................... 66
The Flow of One Side Cutting .......................... 66
Items Necessary for Cutting ................................. 67
Items to Prepare Yourself............................... 69
Contents
3
Creating a MODELA Player 4 File............................. 70
STEP 1: Load the Cutting Data.......................... 70
STEP 2 : Set the Machine Selection ..................... 70
STEP 3 : Set the Origin Point of the
Model and Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
STEP 4 : Set the Material ............................... 72
STEP 5 : Set the Number of Cutting Surfaces ............ 72
STEP 6 : Set the Margin................................. 73
STEP 7 : Set the Surface leveling
Process of the Scrap Board ............................. 74
STEP 8 : Conrm the Cutting Preview ................... 81
STEP 9 : Set the Surface leveling
Process of the Material................................. 83
STEP 10 : Set the Roughing Process..................... 88
STEP 11 : Set the Finishing Process ..................... 93
STEP 12 : Set the Drilling Process ....................... 97
STEP 13 : Set the Bottom Surface Process ..............103
Cutting (Double Sided). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
STEP 1 : Attach the Material to the Scrap Board ........106
STEP 2 : Set the Origin Point...........................108
STEP 3 : Perform the Surface Leveling
of the Scrap Board ....................................112
STEP 4 : Perform the Surface Leveling of the Material ..115
STEP 5 : Perform the Roughing .......................116
STEP 6 : Perform the Finishing.........................118
STEP 7 : Perform the Drilling in the Material............120
STEP 8 : Perform the Drilling in the Scrap Board ........122
STEP 9 : Reverse the Material ..........................123
STEP 10 : Cut the Bottom Surface......................126
STEP 11 : Remove the Cut Material ....................126
STEP 12 : Turning the Power O .......................127
http://www.dgshape.com/
Company names and product names are trademarks or registered trademarks
of their respective holders.
Copyright ©2014-2017 Roland DG Corporation
Copyright ©2017 DGSHAPE Corporation
Preparing the Machine
Preparing the Machine ..........................5
Flow Diagram .............................................. 5
STEP 1 : Turning the Power On............................... 6
STEP 2 : The Machine Run-in ................................ 7
STEP 3 : Conrm the Command Set.......................... 9
STEP 4 : Register the Cutting Tool You Want to Use
(when you are using SRP Player)............................10
STEP 5 : Attach the Cutting Tool ............................11
5
Preparing the Machine
Flow Diagram
*
*
1. “STEP 1 : Turning the Power On” (p. 6)
2. “STEP 2 : The Machine Run-in” (p. 7)
3. “STEP 3 : Conrm the Command Set” (p. 9)
4. “STEP 4 : Register the Cutting Tool You Want to Use
(when you are using SRP Player)”
(p. 10)
5. “STEP 5 : Attach the Cutting Tool” (p. 11)
*Work is unnecessary in some cases. For detail, please conrm procedure contents.
Preparing the Machine
6
STEP 1 : Turning the Power On
Procedure
1. Close the front cover.
2. Press the [ ] (Power) button.
The LED lamp starts ashing and it stays lit after initialization completes.
●〇〇〇〇
Preparing the Machine
7
STEP 2 : The Machine Run-in
When the machine must be run-in
• When the machine is rst set up
• When the consumable part is replaced
• When the machine is not used for a prolonged period
Go to the “STEP 3 : Conrm the Command Set” (p. 9), when the
machine does not need to run-in.
Procedure
1. If a material, or cutting tool is mounted on the machine, remove it.
2. Start VPanel.
"User's Manual “Start VPanel”
3. Click at the upper left of a screen, and click [Maintenance].
〇●〇〇〇
Preparing the Machine
8
4. Click [Conrm] tab. 5. Click [Start] of “Idling.”
*Required time : Approx. 10 minutes
When operation is completed, click [OK] and close a [Maintenance] screen.
Preparing the Machine
9
STEP 3 : Conrm the Command Set
Select the appropriate command mode to match the software to be used.
"User's Manual “Command Set”
NC Code le outputting
"User's Manual “NC Code”
CAUTION
If a command that is sent to the machine is dierent from the command set
selected on the VPanel, an error occurs and cutting becomes impossible.
Command Set Setting
Procedure
1. Click [Setup] on the VPanel.
2. Select the suitable command set.
"Piano.stl" : [RML-1] [OK]
〇〇●〇〇
Preparing the Machine
10
STEP 4 : Register the Cutting Tool You Want to Use (when you
are using SRP Player)
Before you can use a particular cutting tool type, you need to register it with
SRP Player.
You cannot use any cutting tool that has not yet been
registered. Be sure to make a registration before
creating an SRP Player le.
MEMO
If you are using MODELA Player 4 rather than SRP Player, proceed to ”STEP
5 : Attach the Cutting Tool” (p. 11).
Procedure
1. On the menu bar of SRP Player, click [Options] [My Tools...].
2. Register the cutting tool.
Select the check box next to the cutting tool you want to register and then
click .
In the following example, “2 mm Square” and “3 mm Square” are selected.
〇〇〇●〇
Table of contents
Popular Cutter manuals by other brands
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Original instructions
Makita
Makita DCS552 instruction manual
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 user manual
Makita
Makita 4112HS instruction manual
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S manual
Hitachi
Hitachi CM 4SB2 Safety instructions and instruction manual
