Dewetron MOB-DISP-T12 Product manual
TECHNICAL
REFERENCE
MANUAL
MOB-DISP-T12
WELCOME TO
THE WORLD OF
DEWETRON!
Congratulations on your new device! It
will supply you with accurate, complete
and reproducible measurement results
for your decision making.
Look forward to the easy handling and
the flexible and modular use of your
DEWETRON product and draw upon
more than 25 years of DEWETRON
expertise in measurement engineering.
ISO9001
EN ISO 14001
COMPETENTMODULAR APPROVEDCUSTOMIZED COMMITTED
Copyright © DEWETRON GmbH
This document contains informaon which is protected by copyright. All rights are reserved. Reproducon,
adaptaon, or translaon without prior wrien permission is prohibited, except as allowed under the copyright
laws.
All trademarks and registered trademarks are acknowledged to be the property of their owners.
DEWESo™ is a trademark of Deweso d.o.o
3MOB-DISP-T12 • Technical Reference Manual • Prinng version 1.0.0 • December 15, 2015
MOB-DISP-T12
Specifications
MOB-DISP-T12 - external mobile display
> For mobile usage in conjunction with
DEWETRON data acquisition systems
or any other mobile PC system
> 12.1" multi-touch display
> Resolution: 1280 x 800 (WXGA)
MOB-DISP-T12
TFT Display Yes
Diagonal 12.1”
Interface Analog RGB and HDMI
Resolution 1280 x 800 (WXGA)
Colors 16.78 million (24 bit)
Luminance 400 cd/m² base brightness
Brightness control Via OSD
Contrast ratio 1000:1
Vertical frequency 75 Hz
Power supply: rated (max) 11 to 32 VDC (9 to 36 VDC)
Power consumption Typ. 20 W (1.7 A @ 12 V)
Dimensions without suction cup (W x H x D) 338 x 36 x 236 mm (13.3 x 1.42 x 9.3 in.)
Weight 2.15 kg (4.7 lbs)
Mounting VESA-75 threads, 2 suction cups included
Multi-touch interface USB (PCAP)
Caution: Do not place the display in front of the air bag module cover or in front of the seat areas that may
come in contact with a deploying air bag!
Any heavy object within a moving vehicle can become a deadly projectile due to sudden stops or
changes in direction, therefore all possible care should be taken to ensure that all occupants and
objects within a vehicle are carefully and securely held down according to all applicable federal and local laws and
ordinances, company policies, and common sense. Always secure the MOB-DISP-T12 or any heavy object with at
least equal care as you would use for a human being. This is for the safety of the human beings who might be in or
around the vehicle. DEWETRON cannot be responsible for injury, death, damage, or any kind of loss resulting from
the use, proper or improper, of the MOB-DISP-T12, or any other items or services provided by DEWETRON. Use them
at your own risk.
!
4
MOB-DISP-T12
Dimensions
* Dimensions in mm
(25.4 mm = 1 inch)
*
rear view
338
236
29,8
36
75VESA
75
4
M
1/4"20-UNC
290
screw thread
5
1 2 3 4
MOB-DISP-T12 • Technical Reference Manual • Prinng version 1.0.0 • December 15, 2015
MOB-DISP-T12
1 Power supply input connector
2 HDMI interface connector
3 VGA interface connector
4 USB interface connector
MOB-DISP-T12 connectors
Typical MOB-DISP-T12 left side view (connectors)
1 Power supply input connector
The display requires supply voltage within 11 to 32 VDC. A power supply cable or external 115 / 230 VAC power supply
is included with shipment (depending on system configuration).
2
1
Pin assignment:
1 (+) PWR 11 to 32 VDC
2 (-) GND
2 HDMI interface connector
Meets the standard HDMI specifications. Shipment includes no HDMI cable.
3 VGA interface connector
Meets the standard VGA specifications. Shipment includes a 3 m VGA cable.
4 USB interface connector
USB interface connector for touch-screen. Meets the standard USB specifications. Shipment includes a USB cable.
NOTE: The loudspeaker socket is not wired internally so there is no audio output available.
Standard VESA-75 threads
Typical MOB-DISP-T12 rear view MOB-DISP-T12 with mounted suction cups
6
MOB-DISP-T12
1 2 3 4 567
1 AUTO button
2 (-) button
3 LED
4 (+) button
5 MENU button
6 POWER button
7 Fuse (T3, 15 A / 250 V)
MOB-DISP-T12 user interface
Typical MOB-DISP-T12 right side view (user interface)
The MOB-DISP-T12 includes a simple on-screen menu for making adjustments to the display. This menu, called OSD
(on-screen display), is activated by pressing the menu button located on the right side of the MOB-DISP-T12.
1 AUTO button
OSD ON: Exit from OSD
OSD OFF: Select input (HDMI, VGA)
2 MINUS button (-)
OSD ON: Navigate through OSD menu
OSD OFF: Decrease volume (not available)
3 LED
GREEN: MOB-DISP-T12 is ON and input signal found (VGA/HDMI)
RED: MOB-DISP-T12 is ON but no input signal found (VGA/HDMI).
4 PLUS button (+)
OSD ON: Navigate through OSD menu
OSD OFF: Increase volume (not available)
5 MENU button
OSD ON: Enter key
OSD OFF: Enter OSD menu
6 POWER button
Power on/off the MOB-DISP-T12.
7 Fuse
The MOB-DISP-T12 is secured by an exchangeable 15 A / 250 V T3 fuse.
Button lock
To lock/unlock the buttons of the user interface make sure to exit the OSD first. Press the (-) and MENU button at the
same time.
Table of contents
