DEVA Broadcast DB90-TX Manual
Publish Date: 24-Feb-2017
How can the DB90-TX be set
to act as a Streaming Audio Server,
sending audio to DB90-RX decoder/s
used as an IP Audio Client
SET-UP INSTRUCTIONS
Contents
General information ......................................................................................................................... 4
Point-to-point audio transmission .................................................................................................. 4
Point to multi-point audio transmission ......................................................................................... 5
DB90-TX and DB90-RX Set-up ...................................................................................................... 5
DB90-TX Streaming Audio Server Set-up....................................................................................... 6
DB90-RX IP Audio client Set-up..................................................................................................... 7
Appendix A ......................................................................................................................................... 8
Appendix B ....................................................................................................................................... 12
THIS PAGE
IS INTENTIONALLY
LEFT BLANK
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 4 -
General information
The IP Audio encoder and decoder are controlled trough a build in WEB Server and a standard
web browser is used to monitor their status or to make some adjustments. To operate the devices
you need to know their IP Address. In case you are not aware of the IP Addresses and how to open
the WEB interface, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8 and
“Appendix B - DB90-RX Quick User Guide” on page 12.
This conguration allows two types of applications:
POINT-TO-POINT AUDIO TRANSMISSION
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 5 -
POINT TO MULTI-POINT AUDIO TRANSMISSION
IMPORTANT NOTE: One DB90-TX can send audio to maximum ten DB90-RXs. However,
in order for stable connectivity to be guaranteed, the recommended number of clients is 8.
DB90-TX AND DB90-RX SET-UP
Prior to implementing the below written adjustments, the following requirements should be
fullled:
• DB90-TX must have a static IP address;
• If the device is placed behind a router, you will have to make sure that the Stream Server
Port is properly NAT forwarded;
• DB90-RX may have a dynamic IP address;
• DB90-RX should have access to DB90-TX over the network (Internet or LAN).
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 6 -
DB90-TX STREAMING AUDIO SERVER SET-UP
1. Go to Conguration> IP Audio;
2. Choose the preferred audio signal input;
3. Assign Encoder + Sample rate and the desired Signal Quality. The combination of these
parameters will dene the required minimum bandwidth of your network connection;
4. Then in Stream Settings section – specify the Port to be used and the Maximum supported
connections;
5. Preferably change the Name of the stream to identify you server easily;
6. Press [Save] to save the applied changes.
For detailed information and instructions on how communication with the DB90-TX can be
established, please refer to “Appendix A - DB90-TX Quick User Guide” on page 8.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 7 -
DB90-RX IP AUDIO CLIENT SET-UP
1. Go to Conguration> IP Audio;
2. In IP Audio Client section – URL of the DB90-TX Server should be specied. The URL is a
mandatory requisite needed in order for a connection with the server to be established. The
URL could be compound of DB90-TX’s IP Address and Server Port, ex. 192.168.120:5000;
3. Choose the preferred decoder, prebuffer and specify buffer timeout. The decoder set in
the DB90-RX must match the encoder specied in DB90-TX;
4. If needed, set new gain adjustment settings;
5. From the Source priority Section set the priority of the IP Audio Client;
6. Press [Save] to save the applied changes;
7. Apply the same settings to all IP Audio clients to be used in the conguration.
For detailed information and instructions on how communication with the DB90-RX can be
established, please refer to “Appendix B - DB90-RX Quick User Guide” on page 12.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 8 -
Appendix A
DB90-TX
IP Audio Encoder
Quick User Guide
BEFORE YOU USE THIS PRODUCT
In order to be able to enjoy all the benefits of owning your new
DEVA product, please verify first that the latest software and
firmware release were installed.
Visit www.devabroadcast.com/downloads for the most
recent software and firmware downloads, prior the installation.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 9 -
This Quick user guide will make the installation of DB quick and easy these , yo
ca simplify the process and save yourself extra time and effort
90-TX . Following steps u
n . For more information about the Safety
precautions and the Operating environment recommendations please refer to the User Manual.
1. The encoder has to be connected to the local network or Internet by cable with RJ-45 connector;
2. As only one input at a time can be managed by the encoder, please select the preferred signal
source input - either analog or digital one:
For use a cable that ends with two standard RCA jacks to connect the analog signal
source to the analog audio inputs of DB90-TX;
For use a cable that ends with standard RCA jack to connect the S/PDIF signal
source to the digital audio input of DB90-TX;
3. Connect the device to the power supply.
Analog audio
Digital audio
Open a WEB Browser and enter the device IP Address in the browser's address field, them press
Enter. : ;
;
The web interface will be displayed to you with the respective main pages Status Configuration;
Factory Defaults Reboot; Firmware Update.
Current status information will be displayed comprising Audio Status; Network Status;
onnection Status
For further reference see the detailed explanation on the right part of the screen.
: Active
c s .
Click on the button.
Fill in the username and
password requested, default values being: se
and ass .
Configuration Dialog box similar
to the following will appear.
u rname:
p word:user pass
NOTE: Clicking on the icon will toggle live data andLIVE DATA ON OFF
DB90-TX is controlled trough a build in WEB Server and a standard web browser can be used to
monitor its status or to make some adjustments.
To operate the device you need to know its IP Address. In case you are not aware of it, you can hear it
through the headphones when you turn on the the device. Alternatively, use the Network discovery feature
at Local networks ( ).for reference see tepS 9
WEB Interface
STEP 3
Configuration
STEP 2
Connection
STEP 1
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: of[email protected] ,Web: www.devabroadcast.com
- 10 -
General Network ettingsS
If you plan to use static settings please disable the DHCP and fill in the
information requested - IP Address, Netmask, Gateway, Primary and
Secondary DNS. Otherwise, enable the DHCP.
SNMP Settings
Press the to download the latest available DB90 TX
SNMP MIB file. Then Agent ID, Agent Port, Community, Manager IP
and Manager Port.
is used to identify the device among others when a SNMP
notification is send. Agent - enables/disables SNMPAgent.
Download button
specify
Agent ID
-
Web erver ettingsS S
In order to enhance the security of DB90-TX you can set new username
and password. In case a dialog box appear, fill in the NEW username and
password requested.
u p d fieldsNOTE: If sername and asswor are left blank, security is used.NO
NOTE: The MIB file may vary from one firmware revision to another.
Downloading this file from the device guarantees that you have the
proper MIB file.
Audio Settings
Choose the preferred audio signal source. Assign Encoder +Sample rate
and th signal quality. The combination of these parameters will
define the of your Internet connection.
PCM will quality but Network andwidth will be
required
e desired
required bandwidth
improve the , higher b
consequently.
NOTE:
RTPAudio Player
The RTP Settings require Server Address and Port to be
entered.
Decoders'
Icecast Audio Player
If DB90-TX is used as Icecast Source Mount point
Address and Port should be .
an , Encoder IP
filled in
The username and password are used to secure the connection. Make
sure to enter the same information on both sides of the connection.
Stream Settings
Preferably c DB90-TX
d the s
hange the name of the .
If you decide to use the Stream Server you should make adjustments to
the Port an maximum connection which will be supported.
Later on it will be used as a
title name on all WEB pages. Customizing the name will make the device
more recognizable.
NOTE: For more information refer to the help section on the right part of the
screen, containing brief information about each of the fields. For field
description display, point the mouse cursor on the fields on the right.
NOTE: The selected encoder must match the settings of the decoders on
the other side of the connection.
Network Configuration
STEP 4
IP Audio Configuration
STEP 5
Other manuals for DB90-TX
2
This manual suits for next models
1
Table of contents
Other DEVA Broadcast Media Converter manuals
DEVA Broadcast
DEVA Broadcast DB9009-TX User manual
DEVA Broadcast
DEVA Broadcast DB9009-TX Instruction manual
DEVA Broadcast
DEVA Broadcast DB9000-TX Instruction manual
DEVA Broadcast
DEVA Broadcast DB9000-RX User manual
DEVA Broadcast
DEVA Broadcast SmartGen 4.1 Instruction manual
DEVA Broadcast
DEVA Broadcast DB91-TX Manual
DEVA Broadcast
DEVA Broadcast SmartGen Micro User manual
DEVA Broadcast
DEVA Broadcast DB35 Instruction manual
DEVA Broadcast
DEVA Broadcast DB9000-RX User manual
DEVA Broadcast
DEVA Broadcast SmartGen Mini User manual
DEVA Broadcast
DEVA Broadcast DB6000-STC Instruction manual
DEVA Broadcast
DEVA Broadcast DB90-RX User manual
DEVA Broadcast
DEVA Broadcast DB90-TX Instruction manual
DEVA Broadcast
DEVA Broadcast DB9000-RX Instruction manual
DEVA Broadcast
DEVA Broadcast DB9009-RX User manual
DEVA Broadcast
DEVA Broadcast DB91-TX Manual
DEVA Broadcast
DEVA Broadcast DB90-RX User manual
DEVA Broadcast
DEVA Broadcast DB5000 Instruction manual
DEVA Broadcast
DEVA Broadcast DB91-TX User manual
DEVA Broadcast
DEVA Broadcast DB9000-TX User manual
