Detroit Diesel EPA07 User manual

2.2.1 Priming the Fuel System - Three-Filter System

While servicing the fuel system, air can enter the system and will need to be purged. If the air in the system is not

properly purged, a no-start condition, longer than normal crank times, or electronic service codes related to

unstable rail pressure may occur. If a service code is set after work is performed on the fuel system, clear the

codes and retest the system.

The Parker-Racor Three-Filter Fuel System requires specific priming pressures to properly prime the lubrication

circuit on the high pressure pump. To prevent severe damage to the pump and/or other fuel system components,

it is important that only a Detroit ® approved priming tool is used.

Detroit ® approved priming tools for the Parker-Racor Three-Filter Fuel System:

Export Specific Primers:

Proceed as follows:

Note : If there is a need to stop the machine for any reason (leaks, forgot to connect hose, etc.), depress the

STOP button.

Note : Starting difficulty may occur until a drive cycle has been completed to completely remove all remaining air

from the fuel system.

• DAVCO Shop Pro FXP 95 (120 Volt 95 psi) PN: DAVCO FXP95

• ESOC 455 (Pneumatic 95 psi) PN: DES001E19011

• ESOC 250E (120 Volt 95 psi) PN: ESOC 250E

• ESOC 350 (Pneumatic) (Discontinued)

• DAVCO Shop Pro FXP (120 Volt) (Discontinued)

• DAVCO Shop Pro FXP Regulated 50/95 psi (230 Volt Italy/Chile) PN: DDV470E19004

• DAVCO Shop Pro FXP Regulated 50/95 psi (230 Volt Australia) PN: DDV470E19005

1. Connect the Detroit® approved priming tool. Refer to the Original Equipment Manufacturer (OEM)

instructions provided with the tool.

2. Turn the priming tool ON.

3. Prime the fuel system for TWO (2) minutes.

WARNING

ENGINE EXHAUST

To avoid injury from inhaling engine exhaust, always operate the engine in a well-

ventilated area. Engine exhaust is toxic.

WARNING

PERSONAL INJURY

To avoid injury before starting and running the engine, ensure the vehicle is parked on a

level surface, parking brake is set, and the wheels are blocked.

4. With the priming tool still CONNECTED and PRIMING , start the engine and run at idle (600 rpm) for ONE

(1) minute.

5. Turn the priming tool OFF and close the ball valve.

6. Increase engine speed to 1500 rpm for ONE (1) additional minute.

7. Reduce engine speed to idle (600 rpm).

8. Disconnect the priming tool. Refer to OEM instructions.

EPA07 10 GHG14 Fuel Manual (DDC-SVC-MAN-0082)

9. Take the unit for a 15-minute road test to purge all remaining air from the fuel system.

EPA07 10 GHG14 Fuel Manual (DDC-SVC-MAN-0082)

Other manuals for EPA07

This manual suits for next models

Table of contents

Other Detroit Diesel Engine manuals

Detroit Diesel

Detroit Diesel 50 Series Manual

Detroit Diesel

Detroit Diesel EPA07 Instruction manual

Detroit Diesel

Detroit Diesel 60 User manual

Detroit Diesel

Detroit Diesel EPA04 MBE 4000 Manual

Detroit Diesel

Detroit Diesel MBE4000 User guide

Detroit Diesel

Detroit Diesel 92 Series Manual

Detroit Diesel

Detroit Diesel 60 Manual

Detroit Diesel

Detroit Diesel MBE4000 User manual

Detroit Diesel

Detroit Diesel EPA07 MBE 4000 User manual

Detroit Diesel

Detroit Diesel 60 EGR Series User manual

Detroit Diesel

Detroit Diesel V 71 Series User manual

Detroit Diesel

Detroit Diesel EPA04 Series 40 User manual

Detroit Diesel

Detroit Diesel Series 60 DDEC VI User manual

Detroit Diesel

Detroit Diesel MBE4000 User manual

Detroit Diesel

Detroit Diesel 53 Series Manual

Detroit Diesel

Detroit Diesel EPA07 MBE 4000 Operating and installation instructions

Detroit Diesel

Detroit Diesel EPA07 Series 60 DDEC VI User manual

Detroit Diesel

Detroit Diesel 53 Series User manual

Detroit Diesel

Detroit Diesel MBE4000 Operating and installation instructions

Detroit Diesel

Detroit Diesel MBE 4000 Operating and installation instructions

Detroit Diesel

Detroit Diesel V 71 Series User manual

Detroit Diesel

Detroit Diesel 92 Series User manual

Detroit Diesel

Detroit Diesel MBE4000 User manual

Detroit Diesel

Detroit Diesel 60 User manual

Popular Engine manuals by other brands

Rotax

Rotax 125 senior MAX evo installation manual

Kohler

Kohler K361 Service manual

MTD

MTD OHV Series user guide

Kohler

Kohler COMMAND CH18-745 Service manual

Mercury

Mercury D4.2L D-Tronic manual

Selve

Selve SE Plus-RC Series Operating instruction

Perkins

Perkins 1206E-E66TA Operation and maintenance manual

Skov

Skov DA 174 Technical user guide

Rossi

Rossi TX11 Series manual

Siemens

Siemens SIMOTICS T-1FW3 Configuration manual

AL-KO

AL-KO PRO 350 Instructions for use

MTU

MTU 12 V 4000 Lx4 operating instructions

Nanni

Nanni N3.30 Workshop manual

Nanni

Nanni N5.160 CR2 Operator's manual

KSB

KSB SuPreme Series Installation & operating manual

Hiwin

Hiwin EM1 Series user manual

Rotax

Rotax 912 i series Service instructions

Siemens

Siemens SIMOTICS XP 1MB1 operating instructions