Maintenance
Granite
• To prevent staining and scratching, granite should be sealed twice a year
using a granite sealer. Make sure to seal around entire top and edging so
moisture will not get into the seams. Stone sealer can be purchased at a
local hardware store.
• Be sure to wipe up spills immediately. Use a mild soap and water or a
professional natural stone cleaner for daily use.
• Do not use abrasive cleaners.
Hammered Copper
• Upon receiving a new hammered copper table, seal it with a carnuba wax
(found at your local hardware store).
• For ongoing maintenance, continue to seal the table twice a year at the
beginning and end of the season.
• Use a mild soap and water for regular cleaning.
• Vinegar, products that contain acid abrasive cleaners, and furniture polish
should NOT be used.
Stone Series
• Do not place anything with a “rubber compound” on the table. This can
permanently mark the surface.
• Place a tray under all potted plants to avoid discoloration.
• Use “Simple Green®” or a natural citrus cleaner for spills or general clean-
ing.
• Use “Dawn®” dish washing liquid and water for grease or oil spots.
• To ensure complete protection, we recommend the full cover (available for purchase).
Powdering Coating
• The Oriamme Fire Table base, metal lid, and burner ring are made from powder coated compo-
nents.
• “ReCOLOR Multi-Surface Formula®” should be applied annually to keep table components look-
ing fresh and new.
• Apply twice a year for tables near salt water.
• DO NOT use “ReCOLOR®” on table tops.
GRANITE TABLE MAINTENANCE
Granite is a dense, coarse-grained stone and one of the hardest
materials on earth. Its luster, hardness, colors and variations are all
indications of the stone’s mineral composition and origin. Most have
pits and fissures that are inherent to the stone and are part of its rich
natural texture and beauty.
GENERAL FAC TS ABOUT GRANITE:
•Thegranitetabletop is hard and durable and is resistant to
scratching when properly sealed and maintained.
•Thegranitetabletopisheatresistant and can withstand
temperatures upwards of 1800 degrees Fahrenheit.
•To prevent staining and scratches, use a granite sealer as per the MFG recommendations. Be sure to wipe up spills immediately.
•Thepitsandfissuresarerandompronounced markings common to some stones and cannot be removed during
fabrication.
MAINTAINING THE GRANITE:
UPON RECEIVING YOUR NEW GRANITE TABLE SEAL IT WITH A GRANITE SEALER FOUND AT YOUR LOCAL HARDWARE STORE.
SEAL GRANITE AT THE BEGINING AND END OF THE SEASON.
•Useamildsoapandwateroraprofessional natural stone cleaner for daily use.
•Donotuseabrasive cleaners.
•To ensure the beauty of your granite table top, it should be sealed twice a year.
TABLE TOP MAINTENANCE
HAMMERED COPPER
GENERAL FACTS ABOUT HAMMERED COPPER:
•Copperisminedandextruded into copper sheets
•Sheets are shaped and hammered with a dark acid-etched finish applied
•Tops can be formed onto outdoor substrates
•18gaugecopper is used
•Specialfinishisappliedtomaintainpatina
MAINTAINING THE HAMMERED COPPER:
•Top requires regular wiping with water or mild soapy water with soft cloth
•Vinegar, cleaners that contain acid abrasive cleaners or furniture polish should NOT be used
•Acidicfoodandcontaminateswillcausethetabletobecomebrighterbutwillcorrectitselfthroughouttimeintheelements
Upon receiving your new Hammered Copper table seal it with a Carnauba Wax found at your local hardware store. It is recommended that the table
is sealed right away and again in the beginning and end of the season too.
RIVER ROCK
GENERAL FACTS ABOUT RIVER ROCK:
•Isaculminationofscienceandhumanhandscreatingbeatyforalifetime
•Made of metal alloy that is from recycled alluminum
•Highly durable from cracking
•Isabeautifulsmoothartisanproduct
MAINTAINING THE RIVER ROCK:
•Top requires regular wiping with warm water or mild soapy water
•Useafineautomotivewaxorbabyoiltomaintainglossonfinish.Thefinishisstainresistanttolotionsandinsectrepellents,
however, it is best to clean the surface as quickly after exposure as possible.
•Storage:Itisbesttostorethisproductindoorsduringsevereweather.DONOTrollthetoponitsedge,rathercarrythetopto
its storage location and store vertically. A soft cover will also keep your top clean and protected during storage.
Upon receiving your newRiver Rock table seal it with a fine automotive wax or baby oil found at your local hardware store. It is recommended that the
table is sealed right away and again in the beginning and end of the season too.
SANTA FE
GENERAL FACTS ABOUT NATURAL SLATE:
•Slateisanaturalstoneandnotwopiecesareeveralike
•Consists of thin layers of stone and as the layers of slate are separated,
unique patterns and colors emerge
•Natural unevenness and variation in authentic slate which adds to its diversity
•Highlyresistanttoabrasionandcracking
•Norustingbecauseofitshighpurity
•Densityofslatemakesitidealforoutdoors
•Harderthanmarbleandspalling(flaking)isanormal part of slate
MAINTAINING THE NATURAL SLATE:
•Resistant to stains, will not fade or discolor in sunlight.
•Slatetopissealedwithastone sealer and this sealer should be re-applied each year.
•Canbecleanedwithwaterormildsoapywater.
•Donotusevinegar, abrasive cleaners, furniture polish or cleaners that contain acid.
•Shouldbestoredinadrylocationduringtheoffseasonandnotrestingonitsside
UPON RECEIVING YOUR NEW TABLE SEAL IT WITH A STONE SEALER FOUND AT YOUR LOCAL HARDWARE STORE. SEAL STONE AT THE
BEGINING AND END OF THE SEASON.
SAHARA
GENERAL FACTS ABOUT TRAVERTINE:
•Travertine is a unique natural stone that is rich with historical
significance and has been quarried for over two thousand years and is a
product of the earth’s water and carbon cycles.
•It is formed by minerals dissolving in ground water and then being
deposited on the earth’s surface by rivers, natural springs, or geysers.
•The two minerals that make up 99% of travertine are calcite and gypsum
which are colorless.
•Beautiful tones come from traces of yellow sulfur, brown iron compounds, and organic pigments.
•The texture of travertine is partly the result of gas bubbles trapped between layers of stone.
•Each piece has its own distinct character, adding beauty and unique style to any décor.
MAINTAINING THE TRAVERTINE:
•NEVERrestorstandthisstoneonitsside!
•Sincethisstoneissealed,itrequires only regular wiping with water or occasionally with mild soapy water.
•Do not use vinegar, cleaners that contain acid, abrasive cleaners, or furniture polish.
•Donothigh-pressurewashthisstonetop.
•If a stain does occur, it can be easily removed with fine (0) steel wool or finer grit sand paper. If this step is required at any point
the surface area affected needs to be treated with a stone sealer for further protection.
•Useastonesealertwiceperyear.
•For long-term maintenance, store the top in a dry location during the off season and DO NOT rest it on its side.
UPON RECEIVING YOUR NEW TABLE SEAL IT WITH A STONE SEALER FOUND AT YOUR LOCAL HARDWARE STORE. SEAL STONE AT THE
BEGINING AND END OF THE SEASON.
Warranty
TABLE TOP
Designing Fire offers a (2) year, (1) year COMMERCIAL
warranty on table tops valid only with proper maintenance
from date of delivery. This limited warranty covers
craftsmanship and structural components of the table top.
Designing Fire, at manufacturer’s option, will repair or replace
any table top found to be defective during this warranty period.
Warranty is void if any of the following occurs: 1) Incorrect
installation by retailer or customer 2) damage caused by
accidents, 3) misuse, 4) alterations made by anyone other than
Designing Fire Inc. manufacturers.
Note: This warranty does not apply to the use of another
manufacturer’s table top, nor does it apply to the incorrect
installation of the table top onto the base, by the retail store or
customer. This warranty does not apply to any damage caused
by shipping, accidents, fading, staining, natural weathering,
misuse, alterations or repairs.
COMPONENTS
Designing Fire offers a (3) year, (1) year COMMERCIAL,
functional warranty only with proper maintenance from date of
delivery for all working components of the table such as the
burner, propane tank, control valve and regulator. Designing
Fire will, at manufacturer’s option, repair or replace any
Designing Fire component that has failed functionally during
normal use and proper maintenance.
FRAME & BURNER
Designing Fire offers a (10) year, (1) year COMMERCIAL,
structural warranty only with proper maintenance from date
of delivery. Designing Fire Inc. will, at manufacturer’s option,
repair or replace any Designing Fire frame that has failed
structurally during normal use and proper maintenance.
FINISH
Powder Coat: Designing Fire offers a (2) year, (1) year
COMMERCIAL, warranty against blistering or peeling of the
frame nish under normal use and proper maintenance.
Designing Fire, at manufacturer’s option, will renish or
replace your powder coated materials if either of the above
occurs within a (2) year period from the date of purchase.
Occasional rust seepage from crevices and hidden unnished
surfaces inherent in some ornate designs is considered not
a nish failure. Extra care and maintenance is required in
coastal areas.
• Cover when not in use.
• Wipe down with mild solutions regularly
• If possible, store out of the elements
NOT COVERED UNDER WARRANTY
• This warranty does not apply to any damage caused by
shipping, accidents, fading, staining natural weathering,
misuse, alterations or repairs. No other person is authorized
to assume liability on behalf of Designing Fire, and in no
event shall Designing Fire be liable for contributory or
subsequent damage related to merchandise purchased from
Designing Fire.
• Any failure caused by unreasonable use or abuse
• Rust seepage or bleeding from cracks or crevices
• Rust and/or oxidation of frame resulting from exposed
metals that have been scratched, chipped or not properly
maintained by the guidelines listed in the care instructions
• Normal fading of the Oriamme Fire Table
• Customer’s own material choices
• Accidental damage or element damage such as re, wind,
rain, or sun
• Permanent stains caused by lotions, oils, or other
substances
• Discoloring of the re glass due to unreasonable use
MAINTENANCE INSTRUCTIONS
• Oriamme Fire Table should be inspected before initial use,
and regularly inspected and cleaned.
• Oriamme Fire Table should be kept clean and free of dirt
build up. Clean with mild soap and water. Wipe spills quickly
to avoid surface staining, scrubbing with soft sponge or rag.
See complete details for table top maintenance in table top
care instructions page.
• Never leave table standing in water.
• Cover or store your table when not in use for extended
periods of time.
• Tampering is dangerous and will void all warranties. Any
component that is found to be faulty must be replaced with
an approved component.
• Examine the burner and venturi tube to make sure that there
is no lint or dirt in these areas.
TABLE RETURN GUIDELINES
PRIOR AUTHORIZATION from the manufacturing or
manufacturers’ representative is required. You must be the
original purchaser and be able to provide proof of purchase
when you make a claim. To submit a warranty claim, contact
our warranty department at (800) 445-4559 or you may
contact your local dealer.
If the complaint is covered by warranty, Designing Fire will
arrange for freight pick-up and pay the surface freight to
and from manufacturing. The consumer is responsible for
freight charges to and from the manufacturing if beyond the
timeframe stated above. Return of the Oriamme Fire Table
must be packaged for freight pick up. Oriamme Fire Tables
must have been used only for residential use as dened in the
original purchase order.
1110
