Denver TCD-30 User manual

LOCATION OF CONTROL

1. CD DOOR

2. BASS BOOST BUTTON

3. VOLUME CONTROL KNOB

4. REPEAT BUTTON

5. PROGRAM BUTTON

6. RANDOM BUTTON

7. CD STOP BUTTON

8. SKIP/SEARCH BACKWARD “- ”

BUTTON

9. SKIP/SEARCH FORWARD “+”

BUTTON

10. CD PLAY/PAUSE BUTTON

11.BAND SWITCH

12.TUNING KNOB

13.CASSETTE PAUSE BUTTON

14. CASSETTE STOP/EJECT BUTTON

15. CASSETTE F. FORWARD BUTTON

16.CASSETTE REWIND BUTTON

17.CASSETTE PLAY BUTTON

18.CASSETTE RECORD BUTTON

19. CASSETTE DOOR

20.LCD DISPLAY

21.FM STEREO LED INDICATOR

22.LEFT SPEAKER

23.RIGHT SPEAKER

24.FM ANTENNA

25.AC SOCKET

26.AUX IN JACK

27. STEREO HEADPHONE JACK

28.FUNCTION SWITCH

English - 1

AC OPERATION

Before operation please ensure that the voltage on the set corresponds to the

voltage of your local area. Unravel the AC Line Cord; insert one end into AC

socket on the unit and the other end into a standard AC outlet.

Remarks:

1) In case of malfunction due to electrostatic discharge (ESD), reset the unit by

re-connecting the AC cord again to resume to normal operation.

2) When not in use – Unplug the AC power cord completely from the AC power socket.

Warning:

The power cable/disconnect device shall remain easy to operate/disconnect.

BATTERY OPERATION

Disconnect the AC Cord Set completely. Open the BATTERY DOOR and insert

UM-2/ “C” size x 8 batteries (not supplied) making sure that the indicated

battery polarity is observed.

When not in use – remove all the batteries if the unit will not be used for

several months or more.

RADIO OPERATION

1. Slide the FUNCTION SWITCH to the “RADIO” position.

2. Slide the BAND SWITCH to the desired waveband (FM or FM ST.).

3. Turn the TUNING KNOB to your desired radio station.

Note: Radio frequency is shown on the LCD DISPLAY.

4. Adjust the sound level by rotating the VOLUME CONTROL KNOB.

5. To turn off the radio simply slide the FUNCTION SWITCH to “TAPE/OFF”

position.

FM STEREO INDICATOR

Tuning to a FM stereo broadcast station the “FM ST.” LED indicator will light

up. In weak signal areas the FM Stereo signal may not be strong enough and

can cause excessive background noise. In this case, slide the BAND SWITCH

to “FM” position.

ANTENNAS

For best reception, fully extend the FM ANTENNA to receive FM stations.

BASS BOOST

To increase bass at all volume levels, push the BASS BOOST BUTTON to “ON”

position to boost the low frequency tone for an emphasized bass sound.

To release the super bass simply push the button again.

English - 2

STEREO HEADPHONE JACK (Earphone/Headphone is not included)

For private listening, insert the plug of a Stereo Headphone into the STEREO

HEADPHONE JACK and adjust the VOLUME CONTROL KNOB accordingly. Be

sure that your headphone has a 3.5mm diameter stereo plug with an

impedance of 32 ohms. During the use of headphone the speakers are

disconnected automatically.

CASSETTE OPERATION

Tape Playback

1. Depress the CASSETTE STOP/EJECT BUTTON to open the cassette door.

2. Insert a pre-recorded cassette tape into the cassette compartment and

close the cassette door.

3. Slide the FUNCTION SWITCH to TAPE position.

4. Depress the PLAY BUTTON.

5. Adjust the VOLUME CONTROL KNOB to your desired listening level.

6. To stop the tape, depress the STOP/EJECT BUTTON.

Fast Forward and Rewind

The tape can be fast forward or rewound by depressing the FAST FORWARD

or REWIND BUTTON respectively.

Pause Function

During playback or recording, the tape can be stopped temporarily by

depressing the PAUSE BUTTON. To continue playback or recording, press the

PAUSE BUTTON again.

Auto Stop System

When the tape runs to the end during playback or recording, the cassette

operation will be stopped automatically.

Note: When Fast Forwarding or Rewinding, the STOP BUTTON must be pressed

when the tape runs to the end.

Caution

To avoid damage to the cassette mechanism or to the cassette tapes, always

depress the STOP/EJECT BUTTON between each operation!

English - 3

Recording from the radio

1. Tune to a desired radio program as described in the “RADIO OPERATION”

section.

2. Insert a blank cassette tape into the cassette compartment.

3. Press the PAUSE BUTTON.

4. Press the RECORD BUTTON. The PLAY BUTTON is engaged simultaneously

to start recording. With the built-in Automatic Level Control (ALC), the

best recording quality is automatically adjusted. Changing the volume level

will not affect the recording. Release the PAUSE BUTTON to begin

recording.

5. To stop recording temporarily, press the PAUSE BUTTON. To continue the

recording, press the PAUSE BUTTON once again.

6. Press the STOP/EJECT BUTTON to stop recording.

7. When the tape runs to its end, the cassette operation will be stopped

automatically.

AUXILIARY MODE (AUX)

1. Slide the FUNCTION SWITCH to “AUX”

position, “AUX” indicator will be

shown on the LCD DISPLAY.

2. Connect the earphone socket from the

Auxiliary unit (e.g. MP3 player or MD player) into AUX-IN JACK on the

rear of this product via an Audio Line Cord (3.5mm plug on both ends;

not supplied).

3. Play the Auxiliary unit. Music from the Auxiliary unit can be listened

through the speakers of this product.

CD OPERATION

Playing Compact Disc (CD-R-RW Playback compatible)

Note: Should skipping of tracks occur during CD playing try reduce the volume.

When CD is playing do not open the CD Door.

1. Open the CD DOOR by pulling up the CD DOOR. Put a CD disc into the

CD compartment and close the CD DOOR. Set the FUNCTION SWITCH to

“CD” position.

Note: Ensure the CD DOOR is closed properly and locked in place.

2. When CD DOOR is closed with a CD inside, total number of the tracks in

the disc will be shown on the LCD DISPLAY and the unit will go to stop

mode.

3. If the CD DOOR is not closed or there has no disc inside, LCD DISPLAY

will show “ ” and go to stop mode.

English - 4

Play/Pause Mode

1. When the PLAY/PAUSE BUTTON is

pressed during CD stop mode, the first

track will be played. The “PLAY” Indicator

and the specific track number will be

shown on the LCD DISPLAY.

2. For interruption while CD is playing,

press CD PLAY/PAUSE BUTTON once. The

“PLAY” Indicator will blink continuously on the

LCD DISPLAY.

3. Though the sound stops, the disc will

spin continuously. To resume playback, press the CD PLAY/PAUSE

BUTTON again. The music will start from the exact position where it was

interrupted.

4. To stop the CD, press CD STOP BUTTON once whether the CD is in Play

or Pause mode.

5. To turn off the unit, slide the FUNCTION SWITCH to “TAPE/OFF” position.

Skip and Search Mode

1. During play or pause mode, when the CD SKIP/SEARCH FORWARD “+” or

BACKWARD “-” BUTTON is pressed once, it will go to the next track or

back to the beginning of the track.

2. During play mode, when the CD SKIP/SEARCH FORWARD “+” or

BACKWARD “-” BUTTON is pressed and held, it will search the track with

high audible speed forward or backward.

Repeat Mode

1. Repeat 1:

When the REPEAT BUTTON is pressed

once, the “REPEAT” indicator will light

and flash continuously. This single track

of music will be repeated.

2. Repeat all:

When the REPEAT BUTTON is pressed

twice, the “REPEAT” indicator will stay lit.

The whole disc will be played

continuously.

3. To cancel the Repeat function

Press the REPEAT BUTTON repeatedly until the lighted REPEAT indicator

disappears from the LCD DISPLAY.

English - 5

Random Play Mode

This feature allows the track on the disc to be played in a random order.

1. During the CD stop mode, press the RANDOM BUTTON, the “ ”

indicator will be shown on the LCD DISPLAY. Press the CD PLAY/PAUSE

BUTTON and all music will be played in random order automatically.

2. To cancel the random play function, press the RANDO BUTTON again, “

” Indicator will disappear from the LCD DISPLAY.

Program Mode

1. During CD stop mode, press the

PROGRAM BUTTON once. The

“PROGRAM”indicator and the number of

program to be memorized starts from

“01” will light up and blink continuously.

Press the CD SKIP/SEARCH FORWARD “+” OR BACKWARD “-” BUTTON

to select your desired musical track, LCD

DISPLAY will show the appropriate track

number. Press the PROGRAM BUTTON

again to store this desired track into

memory. (Ex. Track no. 7)

2. Repeat above procedure until all desired tracks have been programmed.

A total of 30 tracks can be stored into memory. After complete

programming LCD DISPLAY will show “01” again and flash continuously.

3. To start the Programmed playback, press the CD PLAY/PAUSE BUTTON

once.

4. To check the program you have stored after complete programming,

press the CD SKIP/SEARCH FORWARD “+” or BACKWARD “-” BUTTON

step by step during the programmed playback mode.

5. To cancel the Programmed memory:

¾During CD stop mode, press the CD STOP BUTTON once.

¾Open the CD DOOR during the CD stop mode.

RECORDING FROM CD PLAYER

1. Slide the FUNCTION SWITCH to “CD” position.

2. Put a CD into the CD compartment with the label side upward.

3. Insert a cassette into the cassette compartment and press PAUSE BUTTON

of the cassette deck.

English - 6

4. Press RECORD BUTTON and PLAY BUTTON simultaneously for recording

stand-by. With the built-in ALC, the best recording quality is adjusted

automatically.

5. Activate the CD player by playing a desired track as described in the

COMPACT DISC PLAYER OPERATION section. Release the PAUSE BUTTON

of the cassette deck to start recording.

6. To stop recording temporarily, press the CASSETTE PAUSE BUTTON. To

continue recording, press the CASSETTE PAUSE BUTTON again.

7. Press STOP/EJECT BUTTON of the cassette deck to stop recording. Then

stop CD playback by pressing the CD STOP BUTTON of the CD player.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE APPLIANCE TO

RAIN OR MOISTURE. NO USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

INSTRUCTIONS ON ENVIRONMENT PROTECTION

Do not dispose this product into usual household garbage at the

end of its lifecycle; hand it over to a collection centre for

recycling the electrical and electronic appliances.

By recycling, some of the materials can be reused. You are

making an important contribution to protect our environment.

Please inquire your community administration for the authorized

disposal centre.

English - 7

Table of contents

Popular Portable Stereo System manuals by other brands

Panasonic

Panasonic RXDS520 - RADIO CASSETTE W/CD operating instructions

LG SB159ST owner's manual

Philips

Philips AZ305 user manual

Manta

Manta BBX002 user manual

Sony

Sony ZS-BTG900 operating instructions

Memcorp

Memcorp Disney DB3000-P user guide

Sharp

Sharp GF-800HS Service manual

Philips

Philips AZ 2760 user manual

Hyundai

Hyundai H-1443 instruction manual

Grundig

Grundig RR 300 CD Service manual

Insignia

Insignia NS-BCDCAS1 user guide

Philips

Philips AZ380W user manual

Sony

Sony ZS-S10CP instruction & operation manual

AudioSonic

AudioSonic 42373117 user manual

Akai

Akai A60009 instruction manual

Sony

Sony HCD-E301 Service manual

Memorex

Memorex MW5554 user guide

Panasonic

Panasonic RXDS16 - RADIO CASSETTE W/CD operating instructions