DentalEZ AXcs Basic-Duo User manual

Installation, Operation and Care Manual

DentalEZ Group

2500 Highway 31 South

Bay Minette, AL 36507

aXcs

Basic-Duo

Chair Mounted Unit

Digitally signed 

by Rafael 

Munoz Hilbert

DN: cn=Rafael 

Munoz Hilbert, 

o=DentalEZ 

Group, 

ou=Marketing, 

c=US

Date: 

2002.04.15 

07:41:38 -04'00'

Reason: 

Document is 

released

Location: PA, 

USA

Signatu

re Not 

Verified

aXcs

Basic-Duo CMU 1

Table of Contents

Section I Introduction

Introduction ...................................................... 2

Specifications .................................................... 3

Basic Components .......................................... 4

Section II Pre-installation

Utility Service Center .................................... 5

Plumbing Contractor's Procedure........... 5-6

Electrical Contractor's Procedure............... 6

Section III Installation

Delivery Head & Arm Assembly ..................7

USC Base........................................................... 7

Umbilical Connection................................. 8-9

Foot Control .................................................... 9

High-Volume Evacuator .............................. 10

Saliva Ejector................................................... 10

Air/Water Syringe ........................................ 10

Handpiece ...................................................... 10

Fiber Optics (Optional) .............................. 11

Chipblower (Optional)................................ 12

Other Options .............................................. 12

Delivery Head Tray with Pad...................... 12

Section IV Testing

Delivery System ............................................ 13

Foot Control & Handpiece ........................ 13

Vacuum Accessories .................................... 14

Air/Water Syringe ........................................ 14

Options........................................................... 14

Section V Operation

Delivery System ............................................ 15

Handpiece ...................................................... 16

Foot Control ................................................. 16

Vacuum Accessories .................................... 17

Air/Water Syringe ........................................ 17

Options ........................................................... 17

Section VI Care

Cleaning .......................................................... 18

Disinfecting .................................................... 18

Section VII User Service Information

Delivery Head ............................................... 19

Arm System ................................................... 20

Water Heater ................................................ 20

Handpiece ................................................ 20-21

Service Instruction ....................................... 22

SectionVIII Parts List / Diagrams

Utility Service Center ................................. 23

Delivery Head ............................................... 24

Foot Control ................................................. 25

Air/Water Syringe ........................................ 26

HVE Nozzle ................................................... 26

Saliva Ejector Nozzle ................................... 26

Product Support Services ........................ 27

Tubing Diagram

Template

aXcs®Basic-Duo CMU

2 Installation, Operation and Care Manual

The aXcs® Basic-

Duo CMU basic

package includes

one Delivery

Head Assembly,

Tray wi h Pad,

Arm Assembly

and U ili y

Service Cen er

(USC).

Delivery Head Utility Service Center

Section I Introduction

This manual con ains ins alla ion, opera ion and care

ins ruc ions and user service informa ion for he

Den alEZ aXcs® Basic-Duo Chair Moun ed Uni (CMU).

The aXcs Basic-Duo CMU is designed o provide

rouble-free service when ins alled, opera ed and

main ained according o he procedures se for h in

his manual.

To ensure correc ins alla ion, carefully read all he

procedure ins ruc ions con ained in his manual pay-

ing close a en ion o all no es, cau ions and warnings.

Before proceeding, please review he illus ra ion

below o become familiar wi h he componen s of

he aXcs Basic-Duo CMU.

Af er he Basic-Duo CMU is ins alled, please review

he opera ion procedures and care guidelines wi h he

doc or's s aff. Then leave this manual in the

doctor's office for he doc or's and he s aff's fu ure

reference.

Tr ay

Pivot Link

Arm

Umbilical

Chair Mount

Utility Service

Center

Foot

Control

Delivery

Head

Clean Water

Bottle

(Optional)

Instrument

Hanger

aXcs

Basic-Duo CMU 3

13"

16"

11"

9.5"

18"

270º Pivot Point

180º Pivot Point 270º Pivot Point

180º Pivot Point

Specifications

Section I Introduction

Water Pressure - 40 PSI

Clean Water System

Reservoir Capacity - .75 to 1 liter

Shipping Weight - 38 lbs.

Power Supply

115VAC 50/60 Hz. as applicable

220VAC 50/60 Hz. as applicable

Air Pressure - 80 PSI

TOP VIEW

SIDE VIEW

aXcs®Basic-Duo CMU

4 Installation, Operation and Care Manual

Basic Components

Section I Introduction

The aXcs Basic-Duo CMU componen s are packaged

and shipped according o he car on diagram.

NOTE: Be aware that some cartons are shipped as

fillers and may be empty (even if optional components

are ordered).

Please verify he aXcs Basic-Duo CMU componen s

packaging con en s agains he packing lis .

All par s supplied are necessary for proper ins alla-

ion, so be sure no o discard any hardware or com-

ponen s un il ins alla ion is comple e.

Unpacking Carton:

Accessory/Op ions:

-Handpiece, Vacuum and Syringe Tubings

-Tray/Tray Pad

-Adjus men Tools

-Op ions - Fiber Op ic Con rol Module

- Wa er Hea er

-Clean Wa er Bo le Sys em

U ili y Service Cen er

Delivery Head & Arm Assembly

Chair Moun Bracke

-Umbilical Assembly

-Foo Con rol

Op ional Componen s:

-Ligh Pos and Adap or Bar

-Touch Pad

—NOTICE —

For any questions about an order, please

contact a DentalEZ Equipment customer

service representative at 1-866-DTE-INFO

(1-866-383- 636).

SHIPPING CONFIGURATION

Delivery

Head &

Arm

Assembly

Packing

Inserts

USC

Box

Supplies

Box

aXcs

Basic-Duo CMU 5

—NOTICE —

For reference, a color-coded tubing diagram

is located at the end of this manual.

Utility Service Center

Section II Pre-installation

USC Carton Contents:

Utility Service Center (USC)

USC Cover

USC Base (floorplate)

Bag of Supplies:

-#6 x 3/8" scre s (2)

-#10 scre s (4)

-Adaptors (2)

-Plastic anchors (4)

-1/4" tubing barb

-Plug cap

-1/8" tubing clamps (2)

-1/4" tubing clamps (5)

-Elbo assembly

-Elbo fitting

-Coupler fittings (2)

-Air fitting assembly

-Stop valves (2)

-Water actuator valve assembly

-Washer

NOTE: For wood or metal floors, drill 5/32"

holes. For concrete, drill 1/4" holes and install

plastic anchors.

NOTE: The US umbilical bracket is shipped from

the factory attached to the umbilical assembly and is

not included in the US package.

1. Remove the full-size USC template found in

the back of this manual.

2. Position the USC template according to the

exact layout indicated, making certain correct

distance from base to chair is maintained.

3. Using the USC template, drill four corner

mounting holes for the USC base. But, do

not secure the base to the floor at this time.

1. Find and open the USC bag of supplies.

2. Using the full-size USC template found in the

back of this manual, orient the utilities (as

shown in the picture below) and stub through

the floor.

USC Base Mounting Holes

Air Stop

Valve

Water

Stop

Valve Vacuum

Elbow

CHAIR SIDE

—NOTICE —

Set the USC cover aside until all

installation and testing is complete.

—WARNING —

Before proceeding with plumbing and elec-

trical installation, comply with and maintain

all applicable utility codes and regulations.

—IMPORTANT NOTICE —

DO NOT DISCARD the USC template

after use. Neatly refold it and replace it in

the bac of this manual

Plumbing Contractor's Procedure

aXcs®

Basic-Duo CMU

6 Installation, Operation and Care Manual

Section II Pre-installation

NOTE: Pay close attention to the orientation of the

template to the chair.

3. S eat the valve adaptors to the air and ater

stubs.

4. Apply the appropriate thread sealant to the

valve adaptors and install the stop valves.

5. S eat the vacuum and gravity drain elbo s to

the stubs. The electrical contractor is to provide a covered 115

VAC receptacle hich meets all applicable utility

codes and regulations.

For the recommended location of the 115 VAC

receptacle, see the full-size USC template in the back

of this manual.

NOTE: If the recommended location is not met, the

US base or the optional power module may interfere

with the 115 VA receptacle.

Air Fitting

Assembly

Water Actuator

Valve

Assembly 115 VAC Receptacle

—NOTICE —

Electrical contractor's parts are not supplied.

Electrical Contractor's Procedure

6. S eat the hose connectors to the elbo s as

applicable and orient as sho n in the photo

above.

7. Flush the air and ater lines to remove trash

and debris from the lines.

8. Connect the ater actuator valve assembly to

the ater stop valve as sho n in the photo

above. Using a 5/8" open-end rench,

tighten the nut securely.

9. Connect the air fitting assembly to the air

stop valve as sho n in the photo above.

Using a 5/8" open-end rench, tighten the

nut securely.

aXcs

Basic-Duo CMU 7

Section III Installation

Bracket

Countersink

Bolts

Carton Contents:

Delivery Head, Arm & Mounting Bracket Assembly

High-Volume Evacuator Valve

Saliva Ejector Valve

Solids Collector Traps (4)

Air/Water Syringe

Hardware:

1/8" tubing clamps (4)

In-line connectors (2)

4' length high-volume evacuator tubing

4' length saliva ejector tubing

5/16" countersink, socket-head bolts (2)

T in 1/8" air/ ater syringe tubing

Tools Required:

Utility knife

Level

Liquid soap

Needle-nose pliers

Phillips-head scre driver

Small-slotted scre driver

Set of Allen renches

Chair Mount

1. Remove the existing brake handle cover from

the back of the chair.

NOTE: There are two types of brake handle

covers. One may be removed by just pulling straight

back, the other has two Phillips-head screws with

plastic snap covers that must be removed. If the

existing brake handle cover does not have a cutout

to accommodate the arm's mounting bracket, the

cover may need modification or a new brake handle

cover kit (PN: 3801-825) may be ordered from

ustomer Service (1-866-DTE-INFO).

2. Using an Allen rench and the t o 5/16"

countersink socket-head bolts, attach the

arm's mounting bracket to the chair.

Delivery Head & Arm Assembly

Leveling

Plate

Leveling

Set Screw

USC Base

—NOTICE —

If previous utilities interfere with the

USC base internal bracing, modifica-

tion may be necessary.

3. Install the brake handle cover.

4. Route the umbilical do n the outside of the

chair to the front of the USC.

5. Place a level on the arm and check the level.

1. Position the USC base over the four corner

holes that ere drilled during pre-installation.

2. Secure the base using the four #10 scre s

supplied ith the USC.

NOTE: If level-

ing is needed, tilt

the arm up to ex-

pose the set screw

in the leveling

plate and adjust

the leveling set

screw as necessary.

— WARNING —

Do not connect power to the chair until the

unit is ready for testing.

aXcs®

Basic-Duo CMU

8 Installation, Operation and Care Manual

Section III Installation

1/8"

Yellow

from

Umbilical

1/4" Red Supply

line of Foot Control

USC to Chair

Ducting Hose

Water

Regulator

Assembly

Rigid 1/4"

Green

Incoming

Water

Pressure

Line

5/8" Vacuum

Line &

Elbow

1/8"

Black

1/8"

Blue

1/4" Green

from

Umbilical

Umbilical Connection

1/8"

Red

Air

Line

Poppet

Valve

Assembly

Rigid

1/4"

Red

Incoming

Air

Pressure

Line

1/8" Barb

Air Stop Valve

Assembly

1/8"Yellow

Signal Air Line

Umbilical

Air Regulator

Assembly

1. Using t o #10 scre s, attach the umbilical

bracket hich is already on the umbilical to

the USC base.

2. Attach the rigid 1/4" red, incoming air

pressure line already on the air regulator

assembly to the air fitting assembly on the air

stop valve assembly using the compression

fitting supplied ith the USC.

4. Connect the yello signal air line already on

the poppet valve assembly to the 1/8" barb

on the ater stop valve assembly. Then secure

the yello signal air line using a 1/8" tubing

clamp.

5. Connect the 1/8" red air line from the

umbilical to the 1/8" barb on the poppet

valve assembly (barb nearest the 1/4" red tube

already on the poppet valve assembly). Then

secure the red air line using a 1/8" tubing clamp.

Umbilical

Bracket

Air Fitting

Assembly

Water

Stop

Valve

Assembly 1/8"

Barb

6. Connect the 1/8" yello line from the

umbilical to the remaining 1/8" barb on the

poppet valve assembly (barb next to the 1/8"

yellow line already on the poppet valve assembly).

7. Attach the rigid 1/4" green, incoming ater

pressure line already on the ater regulator

assembly to the ater fitting assembly using

the compression fitting supplied ith the USC.

8. Attach the 1/4" green line from the umbilical

to the ater regulator assembly.

9. Trim the 5/8" vacuum line using a utility knife.

10. Install the 5/8" vacuum line on the vacuum

elbo .

11. Attach the 1/4" red supply line of the foot

control to the 1/4" barb of the poppet valve

assembly.

1/4"

Barb

1/8"

Barb

Water

Fitting

Assembly

3. Use soap to lubricate the 1/8" barb of the ater

stop valve assembly and the open end of the 1/

8" yello signal air line hich is already on the

poppet valve assembly.

1/4"

Red

Line

aXcs

Basic-Duo CMU 9

Section III Installation

12. Connec he 1/8" blue and 1/8" black lines

from he umbilical o he foo con rol. (See the

tubing diagram in the back of this manual.)

13. Open he air and wa er s op valves. Then

check for leaks.

Foot Control

To Unit Foot Control

7/16"

Position

Clip

Base Pump Cover

Power Cord Slot

Recessed Area

Ducting

Hose

USC Base

L-Shaped

Bracket

#10 Screw

Holes

1. Feed bo h he air foo con rol ubing and

umbilical assembly in o he 16" leng h of

corruga ed duc ing hose un il con ac occurs

wi h he 6" leng h of smoo h ubing.

2. Remove he exis ing screw from he elec rical

res rain bracke on he lef side, Posi ion 1.

3. Ins all he 11/16" plas ic clamp over he 6"

leng h smoo h ubing of he air foo con rol.

4. Secure he 11/16" plas ic clamp using he

exis ing bracke hole and screw.

5. On he inside of he base pump cover, loca e

he recessed area around he power cord slo .

Then rou e ou a clearance slo in he cover a

he recessed loca ion.

6. Ins all a hairpin clip on o he corruga ed hose

covering he umbilical assembly, aking care o

posi ion he clip 7/16" in fron of he me al

base assembly.

7. Feed he umbilical assembly's corruga ed

duc ing hose hrough he clearance slo .

8. Posi ion he base (pump) cover aligning he

four moun ing holes o ensure he chair

power cord and umbilical assembly do no

in erfere wi h he cover's fi . Bu , do not

secure he base (pump) cover a his ime.

9. Remove and re ain he wo #10 screws ha

secure he L-shaped bracke o he USC base

pla e.

10. Thread he L-shaped bracke on o he duc ing

hose ha connec s he chair o he USC. (The

ducting hose is left-hand threaded.)

11. Secure he L-shaped bracke back on o he

USC base using he wo #10 screws

previously removed.

12. Remove he hospi al plug from he chair

power cord and ake no e of he wire color of

he cord o he corresponding screw color of

he plug.

13. Pass he power cord hrough he duc ing hose

and in o he USC.

14. Trim he power cord leng h if desired, hen

rea ach he hospi al plug o he cord.

15. Plug he power cord in o he USC recep acle.

Table of contents

Other DentalEZ Dental Equipment manuals

DentalEZ

DentalEZ StarDental Star Simplicity FX User manual

DentalEZ

DentalEZ Simplicity LED Light Head Manual

DentalEZ

DentalEZ StarDental Titan 3 257506 User manual

DentalEZ

DentalEZ TruSim User manual

DentalEZ

DentalEZ Star Titan Low-Speed User manual

DentalEZ

DentalEZ StarDental Titan 3 Five Star User manual

DentalEZ

DentalEZ StarDental PROPHY STAR 3 User manual

DentalEZ

DentalEZ StarDental 430 SWL RA User manual

DentalEZ

DentalEZ StarDental Solara QT User manual

DentalEZ

DentalEZ Aeras Star 500 Elite Handpice User manual

DentalEZ

DentalEZ StarDental Concentrix FX User manual

DentalEZ

DentalEZ StarDental Titan LubeFree Five Star User manual

DentalEZ

DentalEZ aXcs Series User manual

DentalEZ

DentalEZ Aeras 400 Flex User manual

DentalEZ

DentalEZ Star TITAN 3 User manual

DentalEZ

DentalEZ Heritage CORE Chair User manual

DentalEZ

DentalEZ StarDental 430 SWL Flex User manual

DentalEZ

DentalEZ Star User manual

DentalEZ

DentalEZ Star TITAN 3 5K MOTOR User manual

DentalEZ

DentalEZ J-Chair J-3 User manual

DentalEZ

DentalEZ aXcs Magellan User manual

DentalEZ

DentalEZ Star LUBRICATED PROPHY ANGLE User manual

DentalEZ

DentalEZ AERAS Star User manual

DentalEZ

DentalEZ RAMVAC Utility User manual

Popular Dental Equipment manuals by other brands

Vatech

Vatech EzRay Air VEX-P300 user manual

KaVo

KaVo GENTLEpower LUX Contra-angle 25 LP Technician's Instructions

DENTSPLY

DENTSPLY SmartLite Focus Instructions for use

LM ProPower CombiLED quick guide

Owandy Radiology

Owandy Radiology RX-AC user manual

mectron

mectron Piezosurgery Cleaning and sterilization manual

Belmont

Belmont CREDIA G1 operating instructions

Planmeca

Planmeca Sovereign Classic user manual

Bego

Bego Fornax T operating instructions

Renfert

Renfert SYMPRO Operating and safety instructions

Ateco

Ateco AT-301 manual

Nevadent

Nevadent NZPS 3 A1 operating instructions

Muss Dental

Muss Dental MA 50 operation instruction

Diplomat

Diplomat Comfort Series user manual

Dentatus

Dentatus Nyström instruction manual

OMS

OMS DUKE EASY Instruction handbook

OMS

OMS LINEA PATAVIUM Instruction handbook

BRYANT DENTAL

BRYANT DENTAL Ignis Gesture A-494322 manual

DentalEZ aXcs Basic-Duo User manual

Popular Dental Equipment manuals by other brands