Denon DA-300USB User manual
DA-300USB
D/A Converter
Getting Started
English
DEutsch
Français
italiano
EsPaÑol
nEDErlanDs
sVEnsKa
РУССКИЙ
PolsKi
Erste Schritte/ Mise en route/ Guida introduttiva/ Antes de empezar/ Aan de slag/ Att komma igång/ Начало работы/ Skrócona instrukcja obsługi
1
Thank you for choosing a Denon D/A Converter. This guide
provides step-by-step instructions for setting up your D/A
Converter.
If you have setup problems:
If you need additional help in solving problems, contact
Denon customer service in your area.
Welcome
2
What’s In the Box
Getting Started CD-ROM
(Owner’s Manual)
Safety Instructions
D/A Converter AC adapter AC adapter plug unit
(for UK)
Stand for vertical
placement
Feet for horizontal
placement
Audio cable
Before You Begin
Required for setup
USB cable
%
•These drawings are for illustrative purposes only
and may not represent the actual product(s).
3
There are five steps to the setup process.
1Installing the driver software onto your PC (Windows OS only)
2Placing this unit
3Connecting the D/A Converter to the amplifier or the headphone
4Connecting the AC adapter
5Enjoying music using PC or Mac
Setup
4
eThe wizard menu is displayed. Click “Next”.
e
rRead the Software Licensing Agreement, and click “I
accept the terms in the license agreement”.
tClick “Next”.
SOFTWARE LICENSING AGREEMENT
t
r
1Installing the driver software onto your PC
(Windows OS only)
Download the dedicated driver from the
“Download” section of the DA-300USB page of
the Denon website
(http://www.denon.com/pages/home.aspx)
onto your PC.
Unzip the downloaded le.
Select the 32 bit or 64 bit exe le that matches
your Windows operating system, and double-
click the le.
Install the driver.
qSelect the language to use for the installation.
wClick “OK”.
q
w
1
2
3
4
5
yClick “Install” on the installation start dialog.
•The installation starts. Do not perform any operation on
the PC until the installation is completed.
y
uIn the Windows security dialog, select “Always trust
software from DandM Holdings Inc.”.
iClick “Install”.
ui
oWhen the installation is completed, click “Finish”.
o
6
2Placing this unit
nHorizontal placement
Attach the feet for horizontal placement as
shown in the gure.
nVertical placement
1
Guide
Guide
2
3
Align the rear edge of this unit to the guide
position.
Press down this unit onto the stand until it
clicks.
Slide this unit in the arrow direction to align
the edge of this unit with that of the stand.
11
2
3
Feet for
horizontal
placement
7
3Connecting the D/A Converter to the amplifier or the
headphone
nConnecting the amplifier
AUDIO
R L
IN
L
R
RL
Amplifier
Audio cable
(supplied)
%
•An amplifier and speaker need to be connected in order to
playback music. See the owner’s manual of the device you
are using for details on how to connect it.
nConnecting the headphone
8
4Connecting the AC adapter
To household power outlet
(AC 100 – 240 V, 50/60 Hz)
AC adapter
(supplied)
9
nHow to remove the AC
adapter plug unit
q
While pressing and holding the qbutton, slide
it in the arrow direction to pull it up.
nHow to attach the AC
adapter plug unit (for UK)
q
w
Align the qguide with the wguide and press
it down in the arrow direction until it clicks.
1 1
Other manuals for DA-300USB
1
Table of contents
Other Denon Media Converter manuals
Denon
Denon DVP-602CI User manual
Denon
Denon S-52 User manual
Denon
Denon S-32 User manual
Denon
Denon DVP-602CI Parts list manual
Denon
Denon S-52 User manual
Denon
Denon DVP-602CI User manual
Denon
Denon DA-500 User manual
Denon
Denon S-52 User manual
Denon
Denon DA-300USB User manual
Denon
Denon DVP-602CI User manual
