Denon PMA-30 User manual
Accessories 4
Features 5
High quality 5
High performance 5
Part names and functions 6
Front panel 6
Display 8
Rear panel 9
Remote control unit 10
Connections
Installing this unit 14
Installing horizontally 14
Installing vertically 15
Before using the remote control unit 17
Operating range of the remote control unit 18
Connecting speakers 19
Speaker connection 20
Connecting to a device with digital audio output connectors 21
Connecting to a device with analog audio output connectors 22
Connecting the power cord 23
Contents Connections Playback Settings Tips Appendix
2
Front panel Display Rear panel Remote Index
Playback
Basic operation 25
Turning the power on 25
Switching the power to standby 25
Selecting the input source 26
Adjusting the volume 27
Turning off the sound temporarily (Muting) 27
Switching the display’s brightness 27
Playing a device 28
Playing CDs 28
Listening to music via a digital connection (COAXIAL/OPTICAL-1/
OPTICAL-2) 29
Listening to music via a analog connection (AUX) 30
Listening to music on a Bluetooth device 31
Settings
Menu map 37
Source Direct 39
Bass 39
Treble 39
Balance 39
H/P AMP Gain 39
Bluetooth 40
Auto Standby 40
Tips
Tips 42
Troubleshooting 43
Resetting to factory settings 49
Appendix
Specifications of supported audio formats 50
D/A Converter 50
Playing back Bluetooth devices 50
Bluetooth communications 50
Explanation of terms 51
Trademark information 52
Specifications 53
Index 56
Contents Connections Playback Settings Tips Appendix
3
Front panel Display Rear panel Remote Index
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading this manual, be sure to keep it for future reference.
Accessories
Check that the following parts are supplied with the product.
.
Quick Start Guide Safety Instructions Cautions on Using Batteries Notes on radio
Remote control unit
(RC-1220) (built-in battery)
Caps (silver) (x4)
Contents Connections Playback Settings Tips Appendix
4
Front panel Display Rear panel Remote Index
Features
High quality
0The Denon unique digital integrated stereo amplifier
With an output of 40 W+40 W (4 Ω/ohms) much higher than you would
expect from an enclosure of this size, you can enjoy the balance
between delicacy and power that Denon’s sound is known for.
0Durable Aluminum Panels
The upper and lower panels of this device are made with 3mm-thick
aluminum. The highly rigid aluminum panels allow the device to perform
to its full capabilities by suppressing the negative effects external
vibrations have on sound quality.
High performance
0Compatible with a wide range of digital input equipment
This device is installed with two optical digital input interfaces and one
coaxial digital input interface to enable connection to a variety of TVs
and other digital input devices.
0Wireless connection with Bluetooth enabled devices (v p. 31)
You can connect Bluetooth enabled devices such as smartphones and
tablets with this unit to listen to music while browsing email and Web
sites in the Internet away from this unit. In addition, this unit supports
high quality audio codecs, aptX Low Latency and AAC, to enjoy music
and games with a powerful sound.
0Supports vertical installation
This unit can be installed vertically or horizontally. The display
automatically rotates to match the installation orientation.
0System remote control
This unit comes with a system remote control that can also operate the
Denon's CD Player DCD-50.
Contents Connections Playback Settings Tips Appendix
5
Front panel Display Rear panel Remote Index
Part names and functions
Front panel
.
w e t y
q r
APower operation button (X)
This turns the power on/to standby. (v p. 25)
The power status is indicated as follows.
0Power on: Display lit
0Standby: Display off
BProtection circuit indicator
This blinks when the protection circuit has operated.
0“Power does not turn on/Power is turned off” (v p. 44)
0“Protection circuit” (v p. 51)
CDisplay
This displays various pieces of information. (v p. 8)
DRemote control sensor
This receives signals from the remote control unit. (v p. 18)
EVolume control knob
This adjusts the volume level. (v p. 27)
FInput source switching button (q)
This switches input sources. (v p. 26)
Contents Connections Playback Settings Tips Appendix
6
Front panel Display Rear panel Remote Index
.
i
u
.
o
GHeadphones jack
Used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the speaker terminals.
NOTE
0To prevent hearing loss, do not raise the volume level excessively when using
headphones.
HBluetooth button (V)
This switches the input to Bluetooth. This is also pressed during the
pairing operation. (v p. 32)
IInstallation holes for vertical installation feet
These are used when the unit is installed vertically. (v p. 15)
Contents Connections Playback Settings Tips Appendix
7
Front panel Display Rear panel Remote Index
Display
.
q w
AInput source indicator
The following is displayed depending on the selected input source.
COAXIAL
OPTICAL-1 OPTICAL-2
AUX
Bluetooth
.
.
.
.
.
BInformation display
Displays items such as information on the audio signal being input or
the name of a Bluetooth device.
Contents Connections Playback Settings Tips Appendix
8
Front panel Display Rear panel Remote Index
Rear panel
.
q
r t
we
APower cord (v p. 23)
BAUX input connectors (AUDIO IN)
Used to connect devices equipped with analog audio connectors such
as CD players. (v p. 22)
CDIGITAL AUDIO IN connectors
Used to connect devices equipped with digital audio output
connectors. (v p. 21)
DSpeaker terminals (SPEAKERS)
Used to connect speakers. (v p. 20)
ESubwoofer terminal (PRE OUT)
Used to connect a subwoofer with a built-in amplifier. (v p. 20)
Contents Connections Playback Settings Tips Appendix
9
Front panel Display Rear panel Remote Index
Remote control unit
.
q
e
r
t
w
oOperating this unit
ADIMMER button
Adjust the display brightness of this unit. (v p. 27)
BCursor buttons (uio p)
These select menu items.
CBACK button
Returns to the previous item.
DBluetooth button (V)
This switches the input to Bluetooth. This is also pressed during the
pairing operation. (v p. 32)
EINPUT SELECT buttons (df)
This switches input sources. (v p. 26)
Contents Connections Playback Settings Tips Appendix
10
Front panel Display Rear panel Remote Index
Other manuals for PMA-30
2
Table of contents
Other Denon Amplifier manuals
Denon
Denon AVC-A1H User manual
Denon
Denon POA-3012CI - Multi-Zone Audio Distribution Power... User manual
Denon
Denon AVC-A1XVA User manual
Denon
Denon POA-A1HDCI User manual
Denon
Denon PMA-A100 User manual
Denon
Denon PMA-A110 User manual
Denon
Denon PMA-150H User manual
Denon
Denon AMPHS2SRE2 User manual
Denon
Denon AVC-3030 User manual
Denon
Denon PMA-1600NE User manual
Denon
Denon HEOS LINK User manual
Denon
Denon PMA-A100 User manual
Denon
Denon PMA-300V User manual
Denon
Denon PMA-SA1 User manual
Denon
Denon PMA-777 User manual
Denon
Denon PMA-900HNE User manual
Denon
Denon AVC-X8500H User manual
Denon
Denon POA-A1HDCI User manual
Denon
Denon DN-A7100 - AV Surround Preamplifier User manual
Denon
Denon PMA-770 User manual
