DeLonghi TRD40615EBK User manual

TRD40615EBK

ELECTRIC OIL FILLED RADIATOR

Instructions for use. Keep these instructions

Visit www.delonghi.com for a list of service centers near you

ELECTRIC CHARACTERISTICS

120 V~ 60 Hz1500 W

RADIADOR ELÉCTRICO DE BAÑO DE ACEITE

Repase y guarde estas instrucciones.

Lea cuidadosamente este instructivo antes de usar su aparato.

Visite www.delonghi.com para ver la lista de centros de servicios

cercanos a usted.

CARACTERISTICAS ELECTRICAS:

120 V~ 60 Hz1500 W

EN ES

page 4 pág. 9

IMPORTANT

SAFEGUARDS

When using any electrical appliance, some basic safety

precautions should always be observed to reduce the risk

of re, electric shock, and/or injury to persons. Read all in-

structions carefully before using the appliance. Specically:

Danger!

Failure to observe the warning may result in life threatening

injury by electric shock.

- Do not operate any appliance with a dama-

ged cord or plug or after the appliance mal-

functions, has been dropped or damaged in

any manner.

If appliance has leaked any oil, discontinue

using the appliance and contact the service

centre as indicated in the instruction leaet.

Return appliance to authorized service faci-

lity for examination, electrical or mechanical

adjustment, or repair.

- This appliance is not intended for use in

bathrooms, laundry areas, or similar indo-

or locations. Never position the appliance

where it may fall into a bathtub or come in

contact with water.

- Use this appliance only as described in this

manual. Any other use not indicated by the

manufacturer may cause re, electric shock,

or injury to persons.

- CAUTION: To prevent electric shock, make

sure the wide prong of the plug is inserted

in the wide slot of the outlet.

Always use the appliance in an upright posi-

tion.

Important!

Failure to observe the warning could result in injury or

damage to the appliance.

- The appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or instruc-

tion concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

- Extreme caution is necessary when any ap-

pliance is used by or near children or invalids

and whenever the appliance is left operating

and unattended.

- Do not wrap the cord around the appliance

immediately after use.

- To prevent current overload and blown fu-

ses, make sure that no other appliance is

plugged into the same outlet or into another

outlet wired into the same circuit.

- If the power cord is damaged, to reduce the

risk of malfunction it must be replaced by

the manufacturer, its service agent, or a li-

censed and qualied professional.

- Do not use this appliance with an extension

cord or outlet strip. Connect the appliance

directly to a suitable outlet.

- Position the appliance so that the plug and

the outlet can be easily reached even after in-

stallation but not immediately under a xed

power socket.

Danger of burns!!

Failure to observe the warning could result in burns or

scalds.

- This appliance gets very hot when in use.

To prevent burns, do not touch hot surfaces

with bare skin. Use the handle when moving

the appliance. Keep all ammable materials,

such as furniture, pillows, bedding, paper,

clothing, and curtains at least 3 feet (90 cm)

from the front and top of the appliance, also

avoid contact with the sides and back.

- Do not run the power cord under carpeting.

Do not cover cord with throw rugs, runners,

or the like. Keep the cord away from any pas-

sageways where it could be tripped over.

- Do not insert or allow foreign objects to get

into the air intake or air outlet grille, as this

may cause electric shock or re, or damage

the appliance.

- To prevent a possible re, do not block air in-

take or air outlet grille in any way. Do not use

the appliance on soft surfaces, such as beds,

where the openings may become blocked.

- Do not cover the appliance while it is fun-

ctioning in order to avoid overheating and

the risk of re.

- The internal parts of the appliance can beco-

me very hot or produce sparks during opera-

tion. Do not use the appliance in areas where

gasoline, paints, or other ammable liquids

are used or stored.

- It is normal for appliance’s plug and cord to

feel warm to the touch. However, an exces-

sively hot or deformed plug or cord is not

normal and may be the result of a defective

electrical outlet. Defective outlets must be

replaced before using the appliance. Plug-

ging the appliance into a worn outlet may

result in overheating of the power cord or

may cause the risk of re.

- Do not place the appliance near a bed becau-

se objects such as pillows or blankets can fall

o the bed and be ignited by the appliance.

Please note:

This symbol indicates recommendations and important

information for the user.

- If your appliance is equipped with a

polyethylene tape used as a carry handle,

remove it before connecting appliance to

the outlet.

- Always disconnect the plug from the power

outlet when the appliance is not in use.

- Do not use the appliance outdoors.

To completely turn o the appliance, press

the POWER ON/STANDBY button, and then

unplug the appliance.

- Connect to properly polarized outlets only.

- Make sure that the plug is fully inserted into

the outlet.Wall outlets may deteriorate with

time, so check the plug periodically for signs

of overheating or deformation. If the outlet

has deteriorated, stop using it and have it

repaired.

- Check that neither the appliance nor the po-

wer cord have been damaged during ship-

ping.

- Make sure that no styrofoam or other pa-

cking materials remain in the appliance.

- Make sure that no pieces of polystyrene or

other packaging material have been left

between one element of the appliance and

another. It may be necessary to pass over the

appliance with a vacuum cleaner.

- The rst time the appliance is used, run it at

the maximum power for at least two hours.

During this time, ventilate the room thorou-

ghly to eliminate the “new” smell released

by the appliance. It is completely normal for

the appliance to emit “creaking” sounds the

rst time it is run.

- Extreme caution is necessary whenever the

appliance is left operating unattended.

- Do not open the appliance. No user-service-

able parts inside.

SAVE THESE

INSTRUCTIONS

THIS PRODUCT IS FOR HOUSEHOLD USE

ONLY

DESCRIPTION

A Display

B ON/Standby button

C Power setting button

D - Adjustment button

E + Adjustment button

F Timer button

G Brightness button

H ECO button

I Cord holder

L Wheel

USE

Fitting the wheels

Turn the appliance upside down on a rug or soft surface to

prevent damaging the paint nish. Fully unfold the wheels

by turning them outwards (Fig. 1). Turn the appliance back

to its upright position.

Important! Always operate the appliance in upright

position only (wheels on the bottom, controls on top). Any

other position could create hazardous situation.

Location

Place appliance on the oor beneath the coldest window

in the room, or any other location. Your appliance will re-

duce the eect of cold drafts. The appliance should not be

placed immediately below a power outlet. Do not use this

appliance in rooms with a oor area of less than 43 square

feet (4 sq. m.).

Power connection

The appliance must be connected to a properly polarized

household outlet in perfect working condition.

The appliance will be set in the standby condition.

The display will show the symbol. Keep loose clothing

or bedding, furniture and ammable material away from the

power outlet where the appliance is plugged in.

After an interruption of the power supply (power failure or

appliance unplugged) the unit goes always to standby .

When the unit is switched on by pressing the ON/Standby

button, the operating conditions will be same ones previously

set.

Heating function

To turn the appliance on, insert the plug into an electrical

outlet then press the (B) button.

Press button (C) to set the required power level:

MIN ( ); MED ( ); MAX ( ) (see g. 2).

To select the desired temperature, press button + or - (E

or D). By pushing the + or - button once, the temperature

(shown on the display) will increase or decrease by 1°F or 1°C.

Holding the + or - button depressed the value will increase

or decrease rapidly.

The appliance allows you to set a temperature of 41°F (5°C)

and a range from 50°F to 82°F (10°C to 28°C).

Anti-freeze function

Setting the temperature to 41°F (5°C), the appliance will

activate the Anti-freeze function.The display will show the

symbol, in this way the appliance will turn on automatically,

at the MAX power, only if the room temperature falls below

41°F (5°C), to help prevent freezing conditions. If you wish to

go back to the Heating function, press the "+" button once.

Note: in the Anti-freeze function the power level settings are

not able to be adusted. The unit will run at MAX.

ECO function

When this function is active the appliance automatically sets

the most appropriate power level to guarantee optimum

comfort while reducing energy consumption. To activate this

function press the "ECO" (H) button. The display will show

symbol. If the selected temperature is much higher

then the actual room temperature, the appliance will start

automatically and rapidly heat the room.

The appliance will automatically select the most convenient

Fig. 2

Fig. 1

Your product is equipped with a polarized alternating

current line plug (a plug having one prong wider than the

others). This plug will t into the power outlet only one

way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug

should still fail to t, contact your electrician to replace

your obsolete outlet. Do not attempt to modify the plug to

bypass this safety feature.

power level (MAX-MED-MIN-OFF).

If MAX power level has been selected using the

button, the appliance will cycle between: MAX-MED-MIN-

OFF. If MED power level has been selected, the appliance will

cycle between: MED-MIN-OFF.

If MIN power level has been selected, the appliance will cycle

between: MIN-OFF.

Working indicator

The symbol indicates the heating status by means of its

colors.

RED: the unit is heating at the maximum power.

YELLOW: the unit is heating at the medium power.

GREEN: the unit is heating at the minimum power.

absent: the unit is not heating.

Brightness of the display

The appliance allows two dierent brightness settings for the

display. The highest is active when any key button is pressed.

After a few seconds of keyboard inactivity, the brightness

will decrease to the operating brightness level. This lower

level can be adjusted by means of the light button (G).

Press the light button repeatedly till the desired brightness is

reached.There are three brightness levels available.

Key lock

In order to avoid accidental operation, you can lock the

keyboard using the keylock function. To activate this function

press buttons + and - together for at least 3 seconds. The

display shows the symbol and a double acoustic signal

will be emitted. To deactivate the function, proceed in the

same way.

Timer function

This function can be activated in two dierent ways.

Delayed start: With the appliance in standby mode, press

the timer button (F) .

The symbol is displayed ashing together with the hours

left before the appliance comes on (see g. 3). Change the

hours using the + and - buttons, then wait a few seconds for

the program to be stored. The display will return to standby

and the symbols remains on. When the programmed

time has elapsed, the appliance will come on with the

previous settings.

Delayed stop: with the appliance on, press the timer button

. The symbol is displayed ashing together with the

hours left before the appliance goes to standby (see g. 3).

Change the hours using the + and - buttons, then wait a few

seconds for the program to be stored. The current settings

and symbol are displayed. At the end of the set time the

appliance switches to standby automatically. To go back to

operating without the timer, press the timer button twice.

The timer symbol disappears from the display.

Note: the time is settable from 0.5 to 24 hours.

Change of the temperature scale

The display can show the temperature in both °F and °C.

To select the desired temperature scale, when the unit is in

standby position, press and hold the "+" and "ECO" keys for

at least 10 seconds, then release.

The change of scale will be indicated by two short beeps.

Alarms

The appliance has a diagnostic system that makes it possible

to signal malfunctions.

In case of problems, the display will show an alarm message:

(Probe failure)

With this alarm the appliance does not

operate. Contact De'Longhi toll free

number.

(High temperature)

When the product’s internal temperature

is too high, the heating power will

progressively and automatically

be reduced. The display shows

intermittently till the internal temperature

is lowered. To help eliminate the cause

of this alarm, check that the unit is not

covered or obstructed.

SAFETY DEVICE

A safety device switches the appliance o in the event of

overheating.To restart the appliance,

contact the De'Longhi

toll free number.

MAINTENANCE AND SERVICE

Always remove the plug from the power outlet and allow the

appliance to cool. Wipe appliance with a soft damp cloth, do

not use detergents and abrasives.

Should the appliance not be in use over a certain length of

Fig. 3

TROUBLESHOOTING

PROBLEM CAUSE SOLUTION

The appliance doesn't work Be sure it is plugged in and that the

electrical outlet is working.

Check for any obstruction.

The temperature may be set too low.

Plug into the power outlet.

Remove the obstruction and let the

appliance cool down. If the appliance

doesn't work please contact the De'Longhi

toll free number.

Set the temperature to a higher position.

Probe failure, the display

shows: PF

Contact the De'Longhi toll free number.

The display shows: Ht (High

temperature)

The unit is covered or obstructed. Check that the unit is not covered or

obstructed. When the product's internal

temperature decreases the alarm will

disappear.

time, wrap the cord around the cord holder and store it in a

dry place. This appliance has been built to give many years of

trouble free service. In case of malfunction or doubt, do not

try to repair the appliance by yourself: this may result in a

re hazard or electric shock.

Contact the De'Longhi toll free

number.

Other manuals for TRD40615EBK

Table of contents

Other DeLonghi Heater manuals

DeLonghi

DeLonghi DR18TQP Installation instructions manual

DeLonghi

DeLonghi FAN HEATER User manual

DeLonghi

DeLonghi HTF 3031 Troubleshooting guide

DeLonghi

DeLonghi HFX60V15CA User manual

DeLonghi

DeLonghi HFX30 Series User manual

DeLonghi

DeLonghi DCH6031 User manual

DeLonghi

DeLonghi HFS70B User manual

DeLonghi

DeLonghi HTX0607P User manual

DeLonghi

DeLonghi HVA Series User manual

DeLonghi

DeLonghi EW 7707CM User manual

DeLonghi

DeLonghi IH User manual

DeLonghi

DeLonghi CERAMIC FAN HEATER User manual

DeLonghi

DeLonghi HCM Series User manual

DeLonghi

DeLonghi HFS50 Series User manual

DeLonghi

DeLonghi HVA1120 User manual

DeLonghi

DeLonghi DUH 1000 User manual

DeLonghi

DeLonghi HCM2030 User manual

DeLonghi

DeLonghi DFH233 User manual

DeLonghi

DeLonghi 6507L Installation instructions manual

DeLonghi

DeLonghi TRD40615EBKCA User manual

DeLonghi

DeLonghi TRD40615EBK User manual

DeLonghi

DeLonghi HTF3033 User manual

DeLonghi

DeLonghi DCH7993ER.BC User manual

DeLonghi

DeLonghi TCH Series User manual

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide