Dell S520 User manual

Dell™ | Interactive Projector

S520

Laser Touch Setup Guide

Příručka pro zprovoznění laserového

ukazovátka

Opsætningsguide for Laser Touch

Laser Touch instelgids

Guide d'installation du pointeur laser

Laser-kosketusasetusopas

Laserberührung-Einrichtungsanleitung

Οδηγός εγκατάστασης λέιζερ αφής

Laserberührung-Einrichtungsanleitung

Guida all'installazione di Laser Touch

Installasjonsveiledning for laserberøring

Przewodnik konfiguracji laserowej

funkcji dotykowej

Guia de Instalação do Laser Touch

Guía de configuración de la función táctil del

láser

Installationsguide för Laser Touch

Руководство по установке Laser

Touch

lazer Dokunmatik Kurulum Kılavuzu

S520 Laser Touch QSC_A02-EMEA.book Page 1 Wednesday, May 14, 2014 6:56 PM

S520 Laser Touch QSC_A02-EMEA.book Page 2 Wednesday, May 14, 2014 6:56 PM

Dell™ | Interactive Projector

S520

Laser Touch Setup Guide

S520 Laser Touch QSC_A02-EMEA.book Page 1 Wednesday, May 14, 2014 6:56 PM

About Notes

NOTE: A NOTE indicates important information that helps you make better use of your

projector.

__________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of

Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft,

Windows 7, and Windows Vista are trademarks or registered trademarks of Microsoft Corporation

in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in

trademarks and trade names other than its own.

June 2014 P/N 1MK9T Rev. A02

S520 Laser Touch QSC_A02-EMEA.book Page 2 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

NOTE: You computer must have the

following minimum system requirements:

Operating System:

• Windows XP Professional service pack 3

32-bit, Windows 7 32-bit/64-bit, and

Windows 8 32-bit/64-bit

• Windows .NET Framework 4.0

installation is required (You can

download it from the Microsoft site)

• MacOS 10.6 and above

Minimum Hardware:

• Windows processor type: Intel Core i3

or above

• MAC processor type: Intel Core i2 duo

or above

• Windows/MAC RAM: 2 GB of RAM

required or more are recommended

• Windows/MAC Min. HDD space: 110 MB

of available hard-disk space

Part A: Install the Whiteboard

1Install the whiteboard.

NOTE: Refer to "whiteboard installation

instructions".

Set Up Laser Touch on Your Projector

S520 Laser Touch QSC_A02-EMEA.book Page 3 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

Part B: Mount the Projector

2Install the wall mount and the projector.

NOTE: The wall mount is shipped with your

projector. Please refer "wall mount

installation instructions".

NOTE: Project at 87" for a maximum image

size projection or ~84" if you would like to

leave a border around the projector image

for optimal touch experience.

Part C: Attach Laser Curtain Kit

3Attach the laser curtain kit onto the

whiteboard.

NOTES:

aAttachment is aided with locating pin

and magnets.

bYou can also lock the kit in place with a

security screw.

cThere is a cover for the laser curtain kit.

(b) Screw

(a)

S520 Laser Touch QSC_A02-EMEA.book Page 4 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

Part D: Connect Necessary

Cables

4Connect power, video, Mini USB, and DC-

to-DC cables to the projector.

5Connect the power cable to the power

outlet.

6Connect the DC-to-DC cable to the laser

curtain kit.

2m DC-to-DC cable

S520 Laser Touch QSC_A02-EMEA.book Page 5 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

7Connect the VGA cable to your computer.

NOTE: You can also project the image

through VGA-B and HDMI. Press the left

button on your control panel for auto

searching and selecting the correct input

source.

8Connect the Mini USB cable to your

computer.

9Power on the projector by pressing the

power button on the remote control.

MOLEX

5 m Mini USB cable

S520 Laser Touch QSC_A02-EMEA.book Page 6 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

Part E: Install the Touch Driver

on Your Computer

10 The TouchDriver install message will pop-

up automatically after you plug in the USB

cable to your computer. Follow the on-

screen instruction to complete setup.

The driver icon will appear in your

computer's notification area if the driver has

installed successfully.

If the Touch driver is not automatically installed,

go to My Computer and run "TouchDriver.exe".

NOTE: You may require administrator-level

access to install the driver. Contact your

network administrator for support.

Part F: Initialize the Touch

Control Function: Auto Adjust

Touch

This is recommended for first-time use, and

necessary when touch screen responds

inaccurately or erratically.

NOTE: You have to project in duplicate or

projector only modes.

11 When executing driver, click the icon.

The following menu appears on-screen.

S520 Laser Touch QSC_A02-EMEA.book Page 7 Wednesday, May 14, 2014 6:56 PM

Set Up Laser Touch on Your Projector

Select "Auto adjust touch for this computer"

option to execute the auto "calibration and

touch area" procedure.

If the "auto adjust touch failed" message

prompts, please take the steps below for

troubleshooting, then do auto adjust touch

again.

aTurn lights off or reduce stray light to

whiteboard

bDo not walk in front of or move the

projector

cAdjust focus to sharpen the projected

image

If the "auto adjust touch still failed" message

appears on screen, please change to manual

calibrate touch and manual touch area.

Calibrate Touch by Manual:

Executing driver, click the icon, and go

to Advanced Settings menu, click the

Calibrate touch option to execute the

manual calibrate touch mode.

Touch the target marks on the screen.

(Press the "ESC" key to exit the calibration

process). After the 4th point of calibration

is finished, please wait for 2 seconds while

the calibration data is saved.

S520 Laser Touch QSC_A02-EMEA.book Page 8 Wednesday, May 14, 2014 6:56 PM

Other manuals for S520

Table of contents

Languages:

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual