Dell M110 User manual

Dell™ M110 Projector

Wireless Installation Guide

M110 Wireless Installation Guide.book Page 1 Wednesday, August 24, 2011 3:14 PM

About Notes

NOTE: A NOTE indicates important information that helps you make better use of your projector.

__________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden

Trademarks used in this text:

Dell

and the

DELL

logo are trademarks of Dell Inc.;

Microsoft

Windows 7

, and

Windows Vista

are trademarks or

registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

October 2011 Rev. A00

M110 Wireless Installation Guide.book Page 2 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

Operating System:

•Windows

Microsoft Windows XP™ Home or Professional

Service pack 2 (32-bit recommended), Windows®

Vista 32-bit or 64-bit, and Windows®7 Home or

Professional 32-bit or 64-bit

•MAC

MacBook and above, MacOS 10.5 and above

Minimum Hardware:

aIntel®Dual Core™ 1.8 MHz or greater

b256 MB of RAM required, 512 MB or more

recommended

c10 MB of available hard-disk space

dnViDIA or ATI graphic card must with 64 MB

VRAM or above

eEthernet adapter (10 / 100 bps) for an

Ethernet connection

fA supported WLAN adapter for a WLAN

connection (any NDIS-compliant 802.11b or

802.11g or 802.11n WiFi device)

Web browser:

Microsoft Internet Explorer 6.0 or 7.0

(recommended) or 8.0, Firefox 2.0, Safari 3.0 and

above

NOTE: The wireless dongle is not shipped

with your projector. You can purchase it on

the Dell website at www.dell.com.

Wireless Installation Instruction

NOTE: Your computer must have the following minimum system requirements:

M110 Wireless Installation Guide.book Page 3 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

Enable Wireless on the Projector

1Install the optional wireless dongle.

2Connect the power cord with AC adapter to

the wall outlet and press the power button.

3Press the Menu button on your projector

control panel or remote control.

NOTE: Use , , and buttons to

navigate and to select.

4Select the input source as USB.

FCC ID:

SUZ-WU5205C

FCCID:

SUZ-WU5205C

FCCID:

SUZ-WU5205C

M110 Wireless Installation Guide.book Page 4 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

The Wireless Guide Screen shown below appears:

5Make a note of the LOGIN CODE, SSID, and

IP ADDRESS. You will need this information

to log in later.

Install the Wireless Application

Software on Your Computer

6Connect your computer to the M110 wireless

network.

NOTE:

aYour computer must have wireless

network function to detect the connection.

M110 Wireless Installation Guide.book Page 5 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

bWhen you connect to the M110 wireless

network, you will lose wireless

connectivity with other wireless networks.

NOTE: It is recommended that all proxies are

turned off

. (In Microsoft®Windows 7: Click

Control Panel Internet Options

Connections LAN Settings)

7"Wireless Application Software" is required if

used for wireless display. Please download

and install the software for first-time use. If it

is already installed, skip Step 7 - 12.

NOTE: You only need to install the "Wireless

Application Software" once.

8Open the Internet browser on your computer.

You will be automatically directed to the

M110 Web Management web page.

NOTE: If the web page does not load

automatically, enter the IP address (default

IP address is 192.168.100.10) in the browser's

address bar.

9The M110 web management page opens. For

first-time use, click Download.

M110 Wireless Installation Guide.book Page 6 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

10 Select the appropriate operating system, and

then click Download.

11 Click Run to proceed with the installation.

NOTE: You may choose to save the file and

install it at a later time. To do this, click Save.

NOTE: If you are unable to install the

application because of inadequate rights on

the computer, please contact your network

administrator.

12 The installation software will launch. Follow

the on-screen instructions to complete

setup.

M110 Wireless Installation Guide.book Page 7 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

Launch the Wireless Application

13 Once the installation is complete, the

program will launch automatically. Or you

can double-click the icon on the desktop

to start the application.

14 To communicate with your projector, enter

the Login Code (see Step 5), and then click

OK.

M110 Wireless Installation Guide.book Page 8 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

Understanding the Buttons

After a successful log in, the following screen

appears:

Projecting the Presentation

• To project the presentation, click .

• To pause the presentation, click . The

icon turns green.

• To continue the presentation, click

again.

• To stop the presentation, click .

Item Description

1Status Bar Display IP and LOGIN CODE

information.

Menu Click to activate the

application menu.

Minimize

button

Click to minimize the

application.

Close button Click to exit the application.

2Control Toolbar

Full screen Click to project the image in

full screen.

Stop Click to stop projection.

Pause Click to pause projection.

3Connection Status

Connection

Icon

Blinks when projection is in

progress.

M110 Wireless Installation Guide.book Page 9 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction

NOTE: The following information is for

wireless data presentation mode only. Image

display could be slow or not displayed

smoothly if displaying a video clip or

animation. Refer to the frame-rate table

below for reference:

NOTE:

1The percentage of screen variation is based

on 1024 x 768. Example, to display a 320 x 240

video clip on 1024 x 768 desktop, the screen

variation is 9.8%.

2Actual frame rate could be different

depending on factors such as network

environment, image content, signal

conditions, locations, and CPU performance.

3Under clean WLAN environment using

802.11g connection, and no screen

stretching.

NOTE: Your computer will not enter S1

(standby mode) / S3 (sleep mode) / S4

(hibernate mode) when running a wireless

Display presentation.

Screen Variation %1Estimated frames per second2

<5 % 303

<10 % 283

<20 % 263

<40 % 233

<75 % 193

<=100 % 183

M110 Wireless Installation Guide.book Page 10 Wednesday, August 24, 2011 3:14 PM

Other manuals for M110

Table of contents

Other Dell Projector manuals

Popular Projector manuals by other brands

iEmmet

iEmmet MP-312 user manual

Epson

Epson VS400 Specifications

Sony

Sony VPL-HS10 Marketing Specifications & Features manual

Sony

Sony VPL-HW65ES Quick reference manual

Toshiba

Toshiba TLP-791U Specifications

Philips

Philips LC1341 Declaration of conformity

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB operating instructions

NEC

NEC NP600S EDU Specifications

BenQ

BenQ SH753P user manual

Eiki

Eiki EK-623U series quick start guide

Epson

Epson PowerLite Pro Cinema 6020UB user guide

Epson

Epson PowerLite Home Cinema 705HD user guide

Christie

Christie LHD700 user manual

Navitar

Navitar FX instruction manual

InFocus

InFocus LitePro 560 user guide

Sony

Sony SRX-R815P operating instructions

Vivitar

Vivitar DP1500 X specification

Acer

Acer C20 Series manual