Dell D1918H User manual
1
LED MONITOR No. D1918H
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a
product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could result in
serious injury or death.
2
ground
1
Assembly and Disassembly Procedures
Assembly—SOP D1918H
Assembly procedures
Preparation before assembly
1. clean the room for work
2. Identify the area for material
3. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Work ing table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1
1. Insert the LVDS cable to M/B
2. Assemble M/B into the SHIELD PLATE
Step2
1. Insert wireharness from to M/B
2. Assemble M/B by locking 5 screws(M3*6)-(one ground screw)
3. Foam on the HDMI cable（EMI Solution）
2
ground
3
Step3
1. Stick the K/B FFC cable on the M/B
Step4
1. Isolation hood positioning
2.Chapaixian LVDS
Step5
1.Aluminum foil and anti-static adhesive tape
4
Step6
1. Lock the hexagonal screws
Step7
1.Assembly the back cover into the panel
Step8
1.Assembly the back cover by locking 1 screws(M3*8)
5
Step9 Assembling stand
Disassembly—SOP D1918H
Disassembly procedures
Preparation before disassembly
4. clean the room for work
5. Identify the area for material
6. Check the position that the monitors be placed and the quantify of the
monitor ;prepare the area for material flow,according to the actual condition
plan the disassemble layout
7. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Working table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1 disassemble the stand
6
Step2 Remove rear cabinet screw
Step3 Disassemble CABI Back
7
Step4
1. Take off the AL SHIELDING TAPES and pull out the LVDS cable
2. Remove the press button in the front K/B
8
Step5 Unlock the screws
Step6
1. Disassemble the K/B and pull out the FFC cable
Step7
1.Unlock the screws and take out the M/B
2. Foam demolition
9
Step8 Pull out the LVDS cable
Assembly SOP for BOEA185WX3 321171850551001 (MNT)
Assembly procedures
Preparation before assembly
8. Cleanroom and working table
9. Clean cothes
10. Glove
Step 1
1.Take the black on the assembly line
2.Stick the glue in the red box
10
Step 2
1.Stick the label on the red box
Step 3
1.Stick the block gine on the red box
Other manuals for D1918H
2
Other Dell Monitor manuals
Dell
Dell UP3214Q User manual
Dell
Dell 1503FP - 15" LCD Monitor User manual
Dell
Dell E153FP User manual
Dell
Dell SE2422H Instructions for use
Dell
Dell S199WFP - 19" LCD Monitor User instructions
Dell
Dell D2201 User manual
Dell
Dell E2011H User manual
Dell
Dell SE3223Q User manual
Dell
Dell S1909WXWFP User manual
Dell
Dell SR2320L User manual
Dell
Dell P2411H User manual
Dell
Dell G2724D User manual
Dell
Dell ST2010 - 20" LCD Monitor User manual
Dell
Dell TORINITRON P1130 User manual
Dell
Dell UltraSharp 1908FP-BLK User manual
Dell
Dell U2723QE User manual
Dell
Dell UltraSharp U2718Q User manual
Dell
Dell P992 User manual
Dell
Dell U3011 User instructions
Dell
Dell D2721H User manual
