Dell D1918H User manual
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a
product. Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any
attempt to service or repair the product or products dealt with in this service information by anyone else could result in
serious injury or death.
LED MONITOR No. D1918H
D1918H Service Manual
-1-
02/28/2017
1. Assembly and Disassembly Procedures
Assembly—SOP D1918H
Assembly procedures
Preparation before assembly
1. clean the room for work
2. Identify the area for material
3. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Work ing table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1
1. Insert the LVDS cable to M/B
2. Assemble M/B into the SHIELD PLATE
Step2
1
2
D1918H Service Manual
-2-
02/28/2017
1. Insert wireharness from to M/B
2. Assemble M/B by locking 5 screws(M3*6)-(one ground screw)
3. Foam on the HDMI cable（EMI Solution）
Step3
1. Stick the K/B FFC cable on the M/B
Step4
groun
d
screw
groun
d
screw
D1918H Service Manual
-3-
02/28/2017
1. Isolation hood positioning
2.Chapaixian LVDS
Step5
1.Aluminum foil and anti-static adhesive tape
D1918H Service Manual
-4-
02/28/2017
Step6
1. Lock the hexagonal screws
Step7
1.Assembly the back cover into the panel
D1918H Service Manual
-5-
02/28/2017
Step8
1.Assembly the back cover by locking 1 screws(M3*8)
Step9 Assembling support
Disassembly—SOP D1918H
D1918H Service Manual
-6-
02/28/2017
Disassembly procedures
Preparation before disassembly
4. clean the room for work
5. Identify the area for material
6. Check the position that the monitors be placed and the quantify of the
monitor ;prepare the area for material flow,according to the actual condition
plan the disassemble layout
7. Prepare the implement, equipments, materials as bellow:
1) Press Fixture
2) Work ing table
3) Screw-Driver
4) knife
5) glove
6) cleaning cloth
7) ESD protection
Step1 disassemble the stand
Step2 Remove rear cabinet screw
D1918H Service Manual
-7-
02/28/2017
Step3 Disassemble CABI Back
D1918H Service Manual
-8-
02/28/2017
Step4
1. Take off the AL SHIELDING TAPES and pull out the LVDS cable
2. Remove the press button in the front K/B
Step5 Unlock the screws and
D1918H Service Manual
-9-
02/28/2017
Step6
1. Disassemble the K/B and pull out the FFC cable
Step7
1.Unlock the screws and take out the M/B
2. Foam demolition
Step8 Pull out the LVDS cable
Other manuals for D1918H
2
Other Dell Monitor manuals
Dell
Dell S2719DGF Manual
Dell
Dell E2016 User manual
Dell
Dell S2421HS Instructions for use
Dell
Dell E1715S User manual
Dell
Dell SE2422H Instructions for use
Dell
Dell E177FP - 17" LCD Monitor User manual
Dell
Dell E1910 - 19" LCD Monitor User manual
Dell
Dell S2718H User manual
Dell
Dell SE2219H User manual
Dell
Dell Crystal User manual
