DEFEAT-19.Cleaning
UNIT SET-UP
The PSF-B201 operates on 110v AC electrical power
and requires a source rated to 1200 W. Check to
ensure the Power Switch is in the "OFF" position
and then plug the Power Cord into an appropriate
power outlet.
While the Fluid Tank is still empty, adjust the PSF-
B201’s Backpack Straps until a comfortable fit is
achieved
STEP -1
STEP -2
With the Backpack Straps adjusted for maximum
comfort, remove the Fluid Tank Cap and carefully
fill the Fluid Tank with the desired amount of
DFEAT-19 antimicrobial product, or other
appropriate solution of your choice, consistent with
the product’s label instructions. Reinstall the Fluid
Tank Cap and securely tighten
STEP -3
IMPORTANT NOTE:
1. The PSF-B201 is designed and calibrated to atomize “thin” liquids, specifically liquids
with a viscosity or consistency similar to that of water. Heavier, more viscous
formulations generally will not atomize and can clog or damage the PSF-B201
2. Protect Power Cords from being pinched or sharply bent, particularly where they
connect to a power outlet. Inspect Power Cords regularly. If a power cord or cable
becomes warm, frayed, cracked or damaged in any way, stop using it immediately.
WARNING:
1. To minimize the risk of electric shock or fire, use only an outdoor rated extension
cord no longer than 100 feet in length. Consult an electrical professional if longer
cords are required
2. Improper fogging of chemicals can lead to serious injury. Read and follow all label
instructions before attempting to apply any chemical with any fogging device
