
Essential Oil Box
Base Indicator
Air Outlet
Water Gauge
1. Tum off and unplug the unit during cleaning. Clean the
Water Tank and Ultrasonic Plate every seven (7) days.
2. To clean, use a mix of lemon juice and water with a soft
ag, brush, or cotton swab to genty brush away stains.
DO NOT use chemical detergents, wipes, or cleaning
solutions to clean the unit. DO NOT use hard or rough
objects (i.e. steel brushes, scnub pads, etc.) to clean the
unit. DO NOT use water exceeding 104 ° F or 40 ° C.3.
Change the water in the Water Tank every day.
1.Please use the voltage and frequency as specified for
this appliance: 220-240V~50-60Hz.
2.Do not disassemble, repair or reconstruct the
appliance without permission.
3. If the power cord is damaged, it must be replaced
by the manufacturer or its maintenance department or
similar professional maintenance department or
specialist.
4. In case of any abnormal phenomenon, please
unplug the power plug immediately. It must be
repaired by the manufacturer or its maintenance
department or similar specialist.
5. Clean dust on power plug regularly.
6. Please turn off the power and unplug it before
cleaning or moving.
7. When unplugging the power plug, please hold the
power plug tightly instead of pulling the supply lead.
8. Do not move or turn over the appliance with power
supply or water in the water tank.
9. Do not touch the water and components in the
water tank with power supply.
10. Do not cover air inlet and mist outlet with towel and
other items when the humidifier is working.
11. This is not a toy. To avoid accidents, keep it away
from infants and children; do not place it in a crib,
stroller or playpen; do not allow infants and children to
play with and use the humidifier.
12. Do not put the humidifier on the inclined table, it
should be placed in a flat and firm place.
13. Please do not add essence or other similar
substances not produced or supervised by the
company in the water tank of the humidifier.
14. Do not use it in the kitchen, keep it away from heat
The Indicator Light is off and there is no air or mist.
The unit may be turned off or not plugged in.
Solution:
Check the Power Cord to see if it is connected
properly. Check if the unit is turned on.
The Indicator Light is on but there is no air or mist.
The Ultrasonic Panel, Water Tank, and/or water may be
dirty.
The Water Tank may also not be installed correctly.
Solution:
Clean the Ultrasonic Panel and Water Tank and
change the water. Check to see if the Water Tank s
installed correctly.
The unit is emitting an abnormal noise.
The Water Tank may not have enough water for
operation. The unit may be placed on an unstable or
uneven surface.