Decorflame QCMP1050 User manual

ELECTRIC FIREPLACE HEATER

INSTRUCTION MANUAL

QCMP 1050

ATTENTION:

1. Find a location for the ﬁreplace heater that is protected

from direct sunlight.

2. Do not plug the unit into the power outlet before you

read all instructions.

WHEN USING ELECTRICAL APPLIANCES, BASIC

PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE

THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO

PERSONS, INCLUDI NG THE FOLLOWING:

IMPORTANT SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

1) Read all instructions before using this

electric ﬁreplace heater.

2) This electric ﬁreplace heater is hot when

in use. To avoid burns, do not let bare skin

touch hot surfaces. The grill directly in front

of the heater outlet becomes hot during

heater operation. Keep combustible materi-

als, such as furniture, pillows, bedding,

papers, clothes, and curtains at least 3 feet

(0.9 m) away from the front of the unit and

keep them away from the sides and rear.

3) Extreme caution is necessary when

any heater is used by or near children or

invalids and whenever the ﬁreplace is left

operating and unattended.

4) Always unplug ﬁreplace when not in use.

5) Do not operate any electric ﬁreplace with

a damaged cord or plug or after the heater

malfunctions, has been dropped or dam-

aged in any manner. Return ﬁreplace heater

to authorized service facility for examina-

tion, electrical or mechanical adjustment,

or repair.

6) Do not use outdoors.

7) This electric ﬁreplace heater is not in-

tended for use in bathrooms, laundry areas

and similar indoor locations. Never locate

heater where it may fall into a bathtub or

other water container.

8) Do not run cord under carpeting. Do not

cover cord with throw rugs, runners, or

similar coverings. Arrange cord away from

trafﬁc area and where it will not be tripped

over.

9) To disconnect ﬁreplace, turn controls to

off, then remove plug from outlet.

10) Connect to properly grounded outlets

only.

11) Do not insert or allow foreign objects to

enter any ventilation or exhaust opening as

this may cause an electric shock or ﬁre, or

damage the heater.

12) To prevent a possible ﬁre, do not block

air intakes or exhaust in any manner. Do

not use on soft surfaces, like a bed, where

openings may become blocked.

13) A heater has hot and arcing or sparking

parts inside. Do not use it in areas where

gasoline, paint, or ﬂammable liquids are

used or stored.

14) Use this ﬁreplace heater only as

described in this manual. Any other use

not recommended by the manufacturer

may cause ﬁre, electric shock, or injury to

persons.

15) Avoid the use of an extension cord

because the extension cord may overheat

and cause a risk of ﬁre. However, if you have

to use an extension cord, the cord shall be

No.16AWG minimum size and rated not less

than 1875 watts.

16) When storing or transporting the unit

and cord, keep in a dry place, free from

excessive vibration and store so as to

avoid damage.

CAUTION

If you use this heater in conjunction with

a thermal control, a program controller,

a timer or any other device that switches

the heater on automatically, remember to

observe all safety warnings at all times. The

stove heater has safety overheat protection.

If the overheat protection trips, unplug the

power cord from the receptacle. It should

reset automatically after 5 minutes.

SAVE THESE INSTRUCTIONS

FOR FUTURE USE.

SAFETY INSTRUCTIONS

WARNING:

Procedures and techniques if not care-

fully followed - will result in damage to the

equipment. - will expose the user to the risk

of serious injury, illness or death.

This electric ﬁreplace heater is for use on

120 volts. The cord has a plug as shown at

A in illustration below. An adapter as shown

at C is available for connecting three-blade

grounding-type plugs to two-slot recep-

tacles. The green grounding plug extending

from the adapter must be connected to

a permanent ground such as a properly

grounded outlet box. The adapter should not

be used if a three-slot grounded receptacle

is available.

A 15 AMP circuit is required to operate this

heater. If the breaker trips when the heater

is used then you may need to move the

heater to another location or unplug other

appliances that are on the same circuit. If

you require an extension cord use one that

is rated at 1875 watts.

IMPORTANT

Please note when you open the carton

carefully check the unit and make sure

there are no damages. If you have any

problems with the unit, with how the various

functions work or with hidden damages or

missing parts please call 1-800-459-4409

(EST) immediately for service. NOTE: DO

NOT RETURN UNIT TO THE STORE BEFORE

CALLING THE TOLL FREE NUMBER. Do

not dispose of your cartons until you are

completely satisﬁed with your new ﬁreplace

heater. Read all instructions thoroughly be-

fore operating your new Electric Fireplace.

NOTE: Light bulbs may become loose

during shipping. If the ﬂame effect is dim

or does not work, please check that light

bulb or bulbs are ﬁnger tight in socket. See

instructions for replacing bulb or bulbs.

Please do not return the sample to the store

before checking light bulbs.

NOTE: The electric ﬁreplace heater may

emit a slight harmless odor when ﬁrst

turned on. This is caused by activating the

internal heater components for the ﬁrst time

and should not occur again.

SAFETY INSTRUCTIONS

OPERATION

After reading complete instructions, conﬁrm

all controls on ﬁreplace are in the OFF posi-

tion. Plug the ﬁreplace into a 15AMP/120Volt

outlet. If the cord does not reach, you may

use an extension cord rated for a minimum

of 1875 WATTS. Once the ﬁreplace insert

has been properly connected to a grounded

electrical outlet, it is ready to operate.

OPERATION BY

THE CONTROL PANEL

The controls are located behind the grill

below the front glass and can be accessed

by pulling the grill from the top, forward

and down.

ON/OFF: Press this button for main power

and ﬂame effect. The indicator light will turn

on. See below for other control switches.

750W: For low heat function - Press this

switch while the ON/OFF switch is in the on

position for low heat. The indicator light will

turn on.

1500W: For high heat function - Press this

switch while the ON/OFF switch and the

750W switch are in the on position for high

heat. The indicator light will turn on.

Temperature Control: To adjust the tempera-

ture to your individual requirements, turn the

temperature control dial to the right (clock-

wise) to increase the desired temperature

and to the left for lower temperature. This

temperature control dial can only be used

while the ON/OFF switch and 750W/1500W

switches are in the ON position.

Dimmer Control Knob: Turn the dimmer dial

clockwise or counter clockwise to get the

desired ﬂame intensity. The dimmer switch

can only be used when the ON/OFF switch is

in the on position.

Note: When the ON/OFF switch is turned

off, all other heater functions will stop even

though the switches may be in the

on position.

MAINTENANCE

WARNING:

Disconnect power and unplug the power

cord before attempting any maintenance or

cleaning to reduce the risk of ﬁre, electric

shock or damage to persons. The bulbs in

your unit can become extremely hot. Allow

at least 10 minutes between turning off the

unit and removing the light bulbs to avoid

the accidental burning of the skin.

RISK OF FIRE:

Do not exceed the

recommended bulb

wattage.

MAINTENANCE

REPLACING THE

LIGHT BULBS

Step 1: Remove 4 screws on the back

of ﬁreplace and remove the rear

cover of the unit.

Step 2: You will ﬁnd 2 X 60W Type B-10

bulbs under log-set bed.

Step 3: Loosen and remove burnt

out bulb(s) and replace with

new bulb(s).

Step 4: Close the rear cover and secure

with the 4 screws.

Step 5: Plug in the unit.

WARRANTY

Every electric ﬁreplace heater is tested

before it leaves the factory and it is guar-

anteed for one year. If the unit should fail

to operate correctly within one year from

the date of purchase, call customer service

at 1-800-459-4409 (EST). We will, at our

discretion either repair or replace the unit. It

will have to be returned to us freight prepaid

and we will return the repaired or replaced

unit to you freight prepaid. The company’s

sole obligation is to repair or replace the

unit. This warranty is void if in the opinion

of Quality Craft the unit has been tampered

with, altered, misused, damaged, abused

or used with the wrong power source. Light

bulbs are not covered by this warranty. The

warranty is for homeowner use only and

does not cover units used in commercial

situations.

Imported by

Quality Craft Ltd.

Surrey, BC, Canada V3S 5N4

1-800-459-4409 (EST)

www.qualitycraft.com

Made in China

CLEANING/WARRANTY

CLEANING

To clean unit ﬁrst turn off controls on unit

and unplug the unit from power source. To

clean glass display panel; remove dust with

clean dry cloth or to remove ﬁnger prints

and other marks clean glass with clean

damp cloth. Do not use abrasive cleaners or

spray liquids on glass display panel surface.

Metal and metal painted parts should be

cleaned with damp cloth. Do not use

abrasive cleaners or spray liquids on

these surfaces.

ATTENTION :

1. Choisissez pour votre poêle-foyer électrique un

emplacement protégé contre l’ensoleillement direct.

2. Ne branchez pas le poêle-foyer électrique dans la prise de

courant avant d’avoir lu toutes les directives du Manuel.

FOYER ÉLECTRIQUE

MANUEL D’INSTRUCTIONS

QCMP 1050

DIRECTIVES DE SÉCURITÉ IMPORTANTES

1) Lisez toutes les directives avant d’utiliser

ce poêle-foyer électrique.

2) Ce poêle-foyer électrique est chaud

lorsqu’il fonctionne. Pour éviter des

brûlures, la peau nue ne doit pas entrer

en contact avec les surfaces chaudes de

l’appareil. La grille, directement devant la

bouche de sortie du poêle, devient chaude

également durant la marche de l’appareil.

Gardez toutes matières combustibles telles

que des meubles, oreillers, literies, papiers,

vêtements et rideaux à une distance d’au

moins 0,9 m (3 pi) du devant de l’appareil, et

maintenez-les aussi à distance des côtés et

de l’arrière.

3) Faites preuve de la plus grande prudence

lorsqu’un poêle est utilisé à proximité

d’enfants ou de personnes invalides, ou par

ceux-ci, et chaque fois que cet appareil est

laissé en état de marche, sans surveillance.

4) Débranchez toujours le poêle-foyer

lorsqu’il ne sert pas.

5) N’utilisez pas un poêle-foyer électrique

dont la ﬁche ou le cordon d’alimentation

est endommagé, ou après l’apparition d’un

défaut de fonctionnement, ou après que

celui-ci a été échappé au sol ou endom-

magé d’une manière quelconque. Conﬁez

votre poêle-foyer électrique à un centre de

service après-vente autorisé pour toute

inspection, tout réglage des composants

mécaniques ou électriques, ou toute répara-

tion.

6) N’utilisez pas cet appareil à l’extérieur.

7) Ce poêle-foyer électrique n’est pas conçu

pour être utilisé dans une salle de bain, une

salle de lavage ou un autre emplacement

intérieur semblable. N’installez jamais ce

poêle-foyer là où il risquerait de tomber

dans une baignoire ou un autre contenant

d’eau.

8) N’acheminez pas le cordon d’alimentation

de l’appareil sous des tapis ou moquettes.

Ne recouvrez pas le cordon d’une carpette,

d’un tapis d’escalier ni d’un autre revête-

ment de sol semblable. Disposez le cordon

à distance des aires de circulation et de tout

endroit où il risquerait de faire trébucher

quelqu’un.

9) Pour débrancher le poêle-foyer, mettez

avant tout les commandes en position hors

circuit (OFF), puis tirez sur la ﬁche du cor-

don pour l’extraire de la prise murale.

POUR UTILISER UN APPAREIL ÉLECTRIQUE, VOUS DEVR-

IEZ TOUJOURS OBSERVER DES MESURES DE PRÉCAUTION

DE BASE, AFIN DE RÉDUIRE LES RISQUES D’INCENDIES,

DE DÉCHARGES ÉLECTRIQUES ET DE BLESSURES CORPO-

RELLES, DONT LES SUIVANTES :

DIRECTIVES DE SÉCURITÉ

10) Branchez cet appareil seulement à une

prise de courant mise à la terre de façon

appropriée.

11) N’insérez pas d’objets dans l’une des

ouvertures d’aération ou d’évacuation

de l’appareil, ni ne laissez des objets y

pénétrer : ceci risquerait de provoquer une

décharge électrique ou un incendie, et/ou

d’endommager l’appareil!

12) Pour éviter les risques d’incendie, ne

bloquez en aucune façon les prises d’air

de l’appareil ou ses sorties d’évacuation.

N’utilisez pas cet appareil sur une surface

souple, comme un lit, où ses ouvertures

risqueraient de devenir obturées.

13) L’intérieur d’un poêle contient des pièces

chaudes et/ou qui peuvent produire des arcs

électriques ou des étincelles. N’utilisez pas

cet appareil en un endroit où l’on utilise ou

entrepose de la peinture, de l’essence ou

autres liquides inﬂammables.

14) Utilisez ce poêle-foyer électrique

uniquement comme il est décrit dans le

présent Manuel. Tout autre type d’utilisation

qui n’est pas recommandé par le fabricant

est susceptible de causer un incendie,

une décharge électrique ou des blessures

corporelles.

15) Évitez d’utiliser un câble de rallonge :

celui-ci pourrait surchauffer et causer un

incendie. Toutefois, si vous devez utiliser un

câble de rallonge, il doit être d’un calibre

minimal AWG n˚ 16, et sa puissance nomi-

nale, d’au moins 1875 W.

16) Lorsque vous rangez ou transportez

l’appareil et son cordon d’alimentation,

gardez-les en un lieu sec, exempt de toute

vibration excessive, de manière à éviter de

les endommager.

CONSERVEZ LES

PRÉSENTES DIRECTIVES

POUR TOUTE UTILISATION

FUTURE.

Table of contents

Languages:

Other decorflame Indoor Fireplace manuals

decorflame

decorflame M405-48FBK User manual

decorflame

decorflame MM645PT-46FBK User manual

decorflame

decorflame M100-25FAO User manual

decorflame

decorflame MP4100-26 User manual

decorflame

decorflame MM650C-38ACH User manual

decorflame

decorflame MP-2100 User manual

decorflame

decorflame QCM270-50D User manual

decorflame

decorflame QCM375ST-38B User manual

decorflame

decorflame MM360-52GCN User manual

decorflame

decorflame M902L-42FDC User manual

decorflame

decorflame QCM770P-36BDW User manual

decorflame

decorflame M903L-48BHO User manual

decorflame

decorflame QCM769D-40CDC User manual

decorflame

decorflame MM433L-60EBK User manual

decorflame

decorflame MP-2100 User manual

Popular Indoor Fireplace manuals by other brands

Brigantia

Brigantia 35-DVRS31N-2 User's installation, operation and maintenance manual

Nordpeis

Nordpeis Bergen Installation and user manual

Superior

Superior BCT2536TMN Installation and operation instructions

Quadra-Fire

Quadra-Fire 5100I-GD-B owner's manual

Renaissance

Renaissance RUMFORD 1000 user manual

Lacunza

Lacunza IV-800 Instruction book

Baxi

Baxi 940 Installer and owner guide

Dru

Dru Maestro 60/2 Tall RCH installation manual

Diamond Fireglass

Diamond Fireglass SS-O22 General assembly, installation, and operation instructions

HearthStone

HearthStone Windsor Bay 8830 Owner's manual and installation guide

Napoleon

Napoleon ASCENT B42 quick start guide

Enviro

Enviro E33GI owner's manual

Smeg

Smeg L30 FABE Installation & user's instructions

KEDDY

KEDDY K700 Installation instructions care and firing instructions

Godin

Godin 3451 manual

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Installation and operation instructions

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 operating manual

Desa

Desa CCFPDFT Owner's operating & installation manual

decorflame QCMP1050 User manual

Popular Indoor Fireplace manuals by other brands