7
AFTER SALES SUPPORT:
AUS
MODEL: PRG500J PRODUCT CODE: 10562 09/2019
info.aldi@positecgroup.com
1300 889 028
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operang a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operang a power tool in a damp locaon is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operang a power
tool. Do not use a power tool while you are red or under the inuence of drugs, alcohol
or medicaon. A moment of inaenon while operang power tools may result in serious
personal injury.
b) Use personal protecve equipment. Always wear eye protecon. Protecve equipment
such as dust mask, non-skid safety shoes, hard hat, or hearing protecon used for appropriate
condions will reduce personal injuries.
c) Prevent unintenonal starng. Ensure the switch is in the o-posion before connecng to
power source and/or baery pack, picking up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusng key or wrench before turning the power tool on. A wrench or a key
le aached to a rotang part of the power tool may result in personal injury.
e) Do not overreach. Keep proper foong and balance at all mes. This enables beer control
of the power tool in unexpected situaons.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connecon of dust extracon and collecon facilies, ensure
these are connected and properly used. Use of these devices can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your applicaon. The correct
power tool will do the job beer and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and o. Any power tool that
